6G Celicas Forums

Alright, I know this is a complete shot in the dark, but does anyone know if the TEIN brand of Pillow Ball Upper Mounts for camber adjustment will fit on the TRD Coilover setup? (The KYB version of the TRD Coilovers, superstrut style).

I know thats a random question, but im about to put these on and I'd like to be able to adjust camber without literally grinding the holes in my strut towers (dont get me wrong, I will if i have to! haha)

anyway, I can't seem to find any real info about them anywhere, nor can i seem to find an actual TRD brand of mount to allow camber adjustments.

trd superstrut and trd macpherson coilovers use the same cartridges. So I don't see why they would be any different. The top of the mounting points (for the suspension mounts) between the GTFour and ST202 are all the same.

Ahh, good to know!. Anyone know if the spring will fit into the mount? im not sure if the trd spring is a different size from the tein spring or not.. Any input at all here is appreciated

the trd and tein coilovers look very similar. the main difference is the shade of green between the two coilovers. As far as using different spings i wouldnt be able to help you with that. I'm almost certain they are interchangeable. but i'd waight for other input. many jap guys install swift springs on the trd coilover and have fantastic results!

im not sure what the sping rate on those gt4 tein coilovers are. your current trd sprins are 10k front and 8kg rear. check out my last post on this thread. I believe st205 runs stiffer spring rates over the st202 due to extra weight of transmission and awd system:

http://www.6gc.net/forums/index.php?showto...55103&st=80

This post has been edited by BonzaiCelica: Sep 1, 2011 - 12:45 PM

ah, more excellent info! haha. Im thinking the tien mounts will work, and if not directly, I think they will be close enough for me to make them work. That being said i'll still need a way to adjust the rear camber too.. haha

a guy down here in so cal used cusco front and rear billow ball mounts on his tanabe sustec coilovers without any issues. Your's shud be the same

sorry to jack thread but does anyone know where to get some pillow ball mount????

http://www.rhdjapan.com/cusco-pillow-ball-upper-mount-9365

I know C-One used to make pillow ball mounts but I heard they went bankrupt a while back ago. It wouldn't be a bad idea to ask megan racing to see if they could sell you their upper mounts made for our celica's seperately.

and noo you cannot source tein upper mounts separately. their are also some other australian websites that carry cusco as well. Just can't the websites right now.

you can check out bc racing coilovers too see if they sell em separately, also blitz as well. It all parts that are out of reach in the States.

This post has been edited by BonzaiCelica: Sep 2, 2011 - 2:40 AM

Yeah, this is easier said than done apparently.. everyone seems to be out of stock of tein ones.. Going to have to try other avenues I guess, If i find anything, Ill let you know, do the same if you find anything

My bad.. Nengun does have them actually, but they are nearly 600 plus shipping for the set of 4.. grinding the holes out is starting to sound better and better

This post has been edited by Geddes: Sep 2, 2011 - 2:45 PM

I used cusco top mounts front and rear with superstrut trd coilovers, dunno if tien would be any different, but would be surprised if they are, why not try get some cusco ones.