6G Celicas Forums

i bought a 1995 celica GT for £300:-) its very nice, bodywork bit knackered but engine...oh the engine...so smooth although its done 209,000 miles...
i'm trying to order a few bits but people keep asking what engine number is, its not on my stamp under the bonnet, any other way of telling?? and can you really tell the difference between the st and gt? it seems pretty fast, lovely when you get to about 70mph in 2nd gear with the revs at 7500 :-)

any help would be very grateful.. and can anyone point me to a good place to buy parts??

thanks

70 in 2nd? Not a 7A then. I'd guess 3S-GE. Regardless, look at your firewall. It should have a chassis code, engine code, etc. stamped somewhere.

This post has been edited by SwissFerdi: Aug 30, 2011 - 11:31 AM

usually in the driver side on the firewall



behind the brake fluid area in this pics the white thing on the firewall i believe is the engine schematic also tells you what engine it is.

Revving to 7,500 almost has to be a 3S-GE.

yeah. a 3sge i bet. 7a, 5s, and 3sfe wont make someone that happy

thanks for your replies. the one with the pic...yes i have checked that stamp and it doesn't give you the engine number on it:-( i'm guessing you people on here think its the 3S-GE??

is there any way for definate i can tell??

i'll post a pic of the engine on here tomorrow if that helps...thanks

to the left the the sticker there should be a model number engraved like
ST202
ST204
ST205
ect find out which yours says and
http://en.wikipedia.org/wiki/Toyota_Celica...E2.80.931999.29

Summary of 6th Generation Models
Model Code Engine Trim Level Market
AT200 7A-FE ST, ST Limited, SR North America, Europe
ST202 3S-FE, 3S-GE SS-I (3S-FE), SS-II, SS-III, GT (3S-GE) Japan, Europe (Liftback & Convertible), Hong Kong & Thailand (GT Liftback only)
ST203 3S-FE SS-I 4WS Japan
ST204 5S-FE SX, SX-R, ZR, GT North America (all body styles), Australia & New Zealand (Liftback only)
ST205 3S-GTE GT-Four Japan, Europe, Australia, New Zealand

copied From Wikipedia (cant get the formating just click on link)

hi, yes mine does say ST202 on the plate so i have to guess its a 3S-GE engine??
it does say celica GT on the back of the car :-) and it certainly goes like a GT i guess. lol

how do i add images?? :-(

To your profile or this thread?

this thread but i think i've done it..

http://[/img]

http://[/img]

can someone tell me what engine model this is please...its a 1995 2.0l celica gt ST202 jap import. thanks

almost. here you go.

pretty sure its a 3s-ge i don't see a turbo in there

ALSO under the 2 screws that hold the strut bar i can see something etched that should say ST20_ that last number will let you know with the wiki link i sent you before

NVRMIND saw you previous post its a 202.

This post has been edited by spy00005: Sep 1, 2011 - 3:10 PM

Am I the only one not understanding the two air filters =p

I saw that too. Y0 Dawg, I heard you like clean air so we put an air filter on your air filter so you can clean while you clean.

That's a 3S-GE for sure. See the "2000 Twin Cam 16" on the intake manifold? 2 liter, Twin Cam, 16 valves. 3S-GE all the way, as if the 7k revving wasn't a dead giveaway.

1800cc=7a
2000cc=3s
2200cc=5s
Your engine reads 2000cc twin cam. You have the 3s-ge

Correct me if I'm wrong pls.

This post has been edited by matts94celica: Sep 1, 2011 - 9:05 PM

Lucky you got a 3s. Engine bay needs a good shining

Thanks for your help everyone. as for the air filter you can see there is an after market one so the proper one was just left there for it to lean on lol. daft question but can i damage the engine if its steam cleaned?

Avoid high pressure and electrical connections and you'll be fine. Don't do it while the engine is hot either. That will cause rust.

i've always actually cleaned my engine while its running, avoiding the intake & electrical stuff obviously.