6G Celicas Forums

Thanks Brian, I appreciate it. I also looked back to the beginning and noticed my original plan was to make a solid motor mount attached further back on the frame to fit the charger...the reason I was thinking that is because when I bought the vortech on ebay it was labeled as ccw rotation. Luckily I noticed it was actually clockwise rotation before I made up the bracket to install it.

Ben is supposed to hook me up with a good deal on a FMIC when we meet up.

I made a little heat shield over the weekend that kind of wraps around the header (there's also header wrap on there). It's thin gauge aluminum, but better than nothing. Also got rid of the purple and coated everything with some zinc chromate primer and a little clear. Not everyone's cup of tea for color, but atleast I have corrosion protection to the max haha.



This post has been edited by al94st: Jul 25, 2011 - 6:06 PM

Nice!
Anything to keep the heat off that charge pipe is a good thing imo

very nice install, i may ask, will a stock charger from a 4agze work on 7afe?

in the philippines its hard to find those vortech chargers, but i can definitely find/get a surplus 4agze charger.

TIA.

oh sorry i thought that was flywheel hp, very nice then, you've done some decent power increase if you ask me. far from stock!

Yea you could use it, it's just a matter of making it fit, aligning it and all of that fun stuff. They're kind of dated though and it'd be hard to find one in really good condition without a lot of miles on it, but that would still be cool.




No problem, thanks....it's an OK increase, but I can't wait to get an intercooler on it and get back on the dyno. It already feels a lot faster with a smaller pulley and more boost.

a 205 bonnet and a top mount intercooler should be great!!! ????? hehehehe

a 4a blower would probably be a reasonable match for a 7a-fe, as they would have no where near the VE of a 4a-ge and dont rev as hard.

this is great keep it up

the 7a runs around 15:1 idle and cruise. more than 50% load it runs about 11:1

Got my front mount aftercooler, at some point I'll have to install it and dyno again.

FMIC and Half Radiator installed. For any 7afe guys thinking about an optional radiator, a civic half rad will work with the stock radiator hoses, you just need a couple pieces of metal to secure it. I'll try to get pics up 2morr. Turns out that vortechs are super easy to clock, you unscrew the 6 allen head bolts and can spin it any where you want 360degrees.

been waiting for someone to start a thread like this. It's totally different and looks like a fun ass ride.

i hope to see a sleeper version of a compressed 7afe

There is so much win in this thread!! Great work.
I was just in Wilmington two weeks ago, wished I would seen this!

It is fun for sure.



Thanks, I'm glad some people are into it.

Here's some pics, I still need to clean up/paint the piping and get some new t-bolt clamps, but it's pretty much done. I'm planning on auto x'ing the car on the 24th :-)

My 3 year old son "helping" me. Lol he's not a lot of help, but atleast he's interested.






Vortech


Civic Half Radiator, with stock 7afe rad hoses.

There are very simple aluminum L brackets (upper and lower) that I made to make sure the radiator doesn't move, but I missed them in the pics. I used the old top radiator bracket hole and one of the holes for the underbody plastics for the bottom (plastics are still installed).
*Edit - also forgot to mention there is a 1500cfm fan on the rad in the front, but it runs so cool it hardly ever comes on.

This post has been edited by al94st: Sep 10, 2011 - 6:12 PM

good to see the civic 1/2 rad fits well in the bay, good work!
liking those home made ramps too!

Thanks, I'm kind of surprised no one has tried the rad before (that I've seen anyway).

Yea, those ramps were totally worth the $ and time, I hate using the jack stands. They're way safer than those short plastic ones they sell too.

ya what he said.

got any other pics of the radiator??

running a limited slip?? sorry havent paid much attention to this thread till now, Great JOB!!

This post has been edited by BonzaiCelica: Sep 11, 2011 - 8:23 PM

Nah, I can take more if needed though. You can get the rad with fan for like $70 (or so) shipped on ebay.
Tranny is stock.

Any plans of throwing an intercooler on soon? I love this project...it's silver, an ST, and it's supercharged. Nice.

This post has been edited by SwissFerdi: Sep 11, 2011 - 10:20 PM