6G Celicas Forums

Hi mate,

Thanks for the order.

By no climate control do you mean you have the twist dial heater controls?

There you go, here are my heater controls. Is it possible to get the kit in whit LED colour please? And ignore the PANIC signature above the AC button (I don't have the AC, but those who have it have the button there.)

This post has been edited by Grega: Sep 20, 2011 - 2:33 PM

Hi mate,

No problemo, white will make your heater controls look like this. As you can see, the button indication is still green but the backlighting is white.



This post has been edited by Spree: Sep 20, 2011 - 6:06 PM

amazing, thanks a lot!! So the speedo lighting will aslo turn out white right? And the clock also? Man I can't wait!!

got mine yesterday! thank! can't wait to install. will post up pics after.

OK.

More pictures for your delectation!









Sweeeeeet!

Maaaan I'm in love!! Can't wait to get this kit!! Thanks alot for helping informations!

No problemo.

Just also to let everybody know that I also offer bulbs for the Fog light switch, headlight washer and level switch found on some models for $9.99 delivered with instructions or $6.99 along with a dash kit.

I'm also about to release an LED brake light kit. The bulbs on the right and middle are led's and the two on the left are stock.

http://www.youtube.com/watch?v=0yGjDbjdx0I

I want a red kit!

PM me when you are ready mate. Red does look very cool indeed.

I am thinking about going with red for my dash now....

Hey spree I was thinking also, do u offer the led which goes into the power motor window controller for the driver's side? It's currently green stock and the average person which has a Celi also doesn't really notice it because it is extremely dim.

Thanks,

Jeff

Hi,

I don't offer anything for this yet as I focus on the easily modded parts that require no soldering and can be changed back to stock or another color easily.

The led in the switch will need to be unsoldered and the new one soldered on and it is so small that I don't even notice it in my car.

I will probably release a kit though to do the switch button illumination in the climate control/hvac and the window switch at some point but this will be a more advanced project for people that don't mind a bit of soldering...

Latest batch of orders going out today. :-)

Now which type of bulbs are those for the LED's in the tail lights? 7443?
The JDM style tail lights have the 7443 type of bulb and I forget what the US ones are.

i would like a led kit for the taillight and rear top 3rd brake light as well (orange yellow for the amber turn) white for the reversing, and red for the brake lights ---> for the JDM tails.

This post has been edited by chacha: Sep 28, 2011 - 11:53 AM

The bulb types are 1157 and 1156.

I'm working on this guys and will have prices within a few weeks. :-)

Would you be able to make 7440 and 7443 bulbs? The 7443 are for the JDM brake lights and the 7440 are for the turn signal and reverse lights.
I know a decent amount of people have the JDM Tails (especially in the US).

Its all very confusing as we all call them different things and when I looked up the 7443 bulb it showed me a different bulb entirely but I'm sure we are talking about the same ones


1557 = brake light bulbs, bayonet fitting, one contact higher then the other, duel filament, one filament for main lights, one filament for brakes on (must be 7443)


1556 = indicator and reverse light bulbs, contacts at same level, one filament (must be 7440)

I have JDM tails. :-)

This post has been edited by Spree: Sep 28, 2011 - 5:21 PM

Its for the defrost button:


It's a twist cap with a bulb it in just like the others:

Hmm.

Yes a single 3528 smd led should replace that bulb no problem

If you pm me your address I will send you the bulb for free. Also remind of the colour needed please?

All I would like is some feedback on how it goes with the fitting and pictures of the result.


This post has been edited by Spree: Sep 30, 2011 - 12:02 PM