6G Celicas Forums

Goin back to black or doin something different
I color matched mine to the outside an it looks good
but thinking I might redo it all in gray like I think someone said was stock color in gt4 or ss3
can't remember

it will be subaru quick silver met color

that should look sweet after gauges are In

Hey kurt the color ur talking about us almost a gun metal color which was in the SSIII. Just helpin out bro, lol

Uploaded with ImageShack.us

Nice

right after putting the piece in place, the putty just made the paint crack a bit...but i will fix it back

i think of all 3 gray gauge like the center one, gonna looks better


Uploaded with ImageShack.us

This post has been edited by Needles: Oct 27, 2011 - 2:16 PM

ok that helps might do it after winter still like the color match look but im getting alil bord with it

Lookin good

changed the start button location , and put it on the hand brake, i dont use the hand brake and its easy and faster to start it from there then on the panel

Uploaded with ImageShack.us


Uploaded with ImageShack.us

Do you just not want your key in the ignition to start the car?

I dont really understand the point of putting the push start button cause I could have sworn your steering wheel locks when you don't have the key in it..

i need to put the key in position acc2 to start for the fuel pump get power,
a couple time ago, my starter didnt operate by clicking the start key, so just bypass it whit a start button, didnt had time to get trough thast since,

but the push start button power , powered alone to the battery and starter direct, whit a good ground setup, make my car starting faster and , i have no loss of volt when starting, like my radio will stay open and wont cut at all

after 2 test , my center console look UGLY AS HELL , so, im gonna try something else, any ideas or suggestion will be appreciate but maybe not considerate.....lol, i think going back to black,

Get rid of that ridiculous shift knob. How can you even tolerate that thing?

buy a engine start push button and set it in one of the air vent holes

This post has been edited by Neon90424: Nov 2, 2011 - 7:32 AM

Somethings you do are very original and creative and other things werent thought through clearly. Please un-tape that from your e-brake and mount it somewhere it would look much better. Take the time and do it right once or you wind up doing it 3 or 4 times. All in all car looks good keep up the good work

I would suggest figuring out a theme for your car because I see blue, black, yellow, fo carbon vinal

like always., whitout having time to finish my work whit the center console, seat, body, etc... i just get a nice deal on some eibach spreing and kyb gr-2 shock, that should get me 1,8 inch lower



and all brand new, in box







Uploaded with ImageShack.us



This post has been edited by Needles: Nov 11, 2011 - 3:29 PM

You haven't fixed your rust issue yet have you?

Rusts?