6G Celicas Forums

Gonna be super excited for this little project.

Supplies:
Red
Blue
Yellow
Neon Green
White
Black
Fluorescent Orange
High build primer
Glazing Putting
Body filler spreader
Super sticky tape
Qty. 6 Brushes
-3 Medium
-3 Small
600grit sandpaper
Dish washing soap
Drying cloths

Tools:
10mm socket (Shallow or deep)
3/8" Ratchet
Paint horse? or a stool

This post has been edited by 808celica: Dec 5, 2011 - 6:43 PM

Supplies:


Step 1:


Step 2:


Step 3:



This post has been edited by 808celica: Dec 5, 2011 - 6:21 PM

Finished product!


Total estimated time 3hrs to complete w/No Clear Coat

I said it on Facebook and I'll say it again.

DAAAAAAAMN.

that looks absolutely amazing. good job.

how do you do that, though? curious. looks like it'd be super nice on the valve cover.

This post has been edited by samir0189: Dec 5, 2011 - 8:22 PM

You next





Very very very easy lolz

Get a cup and brush for each color. Spray paint into cut until you got enough to dip the tip of the brush. Proceed to splatter/shake/wiggle the brush.

Regular point and shoot for today. GTFour wing going back on, maybe spoilerless. Possible galavanting tomorrow


This post has been edited by 808celica: Dec 5, 2011 - 10:59 PM

Looks like your box of crayons sneezed. Lol.

Good work! Wouldn't have it on mine, but that looks good!

honestly don't know whether i like it or dislike it but you definetly get points for originality and if you like it rock on bro.

Sweet, looks like my snowboard goggles. Oakley crowbars, hehe.

Shweet, tack on another reason why your name is in my sig

Nahhh, I've got some work to do before I can pull something like that off



Woah, I just noticed that I'm on there. I didn't know people liked my car as much as I do

This post has been edited by HectortheRican: Dec 7, 2011 - 4:30 PM

Looks sweet man! Nice color choices

I think it would have looked better with less colors, but still looks pertty cool

And on the other hand, I'm not surprised one bit you have a hellaflush skateboard hahahaha

It matches his license plate!



i think less "splatter dots" and more "splatter lines" would have helped in addition to less colors, but good work bud!

I was thinking the same thing lmao! got pride? anywho, it LOOKS GREAT! u GOTTA put some clearcoat on there or you will be sorry!

im surprised you didnt use the rainbow sparkles clearcoat to go over or under the paint! it actually looks really good when the sun hits it

Liking the TEQ thought I was the only one

Lol Assholes. I had no choice on the license plate. Its the state design

Sorry I didnt get any pics of the car with my better camera.

Also I didnt even notice I had my board in the pic

yeah I kinda wish I used less colors, maybe just the green, red, yellow, and blue. The orange kinda kills it. None the less this sets me apart

@Rob: was bouncing the idea around. I thought I was the only one also Great minds think alike

I promise, better pics to come

nice job, how can you make the space wider? it looks like wider than an european plate( over 520mm) just sanding?

This post has been edited by zd1818: Dec 12, 2011 - 1:50 AM

looks sick,very unique

I am actually really suprised of how good this looks. seriously considering doing this when i get my car repainted. nice job man!