6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> st202 "plug and play" with 94 gt???, question
post Mar 15, 2012 - 1:49 AM
+Quote Post
hjesse11

Enthusiast

Joined Aug 1, '11
From Pittsburgh
Currently Offline

Reputation: 0 (0%)




Will an st202 engine work with the 94 5s-fe transmission and allow fwd instead of the awd transmission? I may have a cracked head and found a cheap st202 so i figure if itll work ill just swap it in. If not ohwell, ill find another 2.2 engine ha. Thanks guys.

This post has been edited by hjesse11: Mar 15, 2012 - 1:53 AM
post Mar 15, 2012 - 1:59 AM
+Quote Post
Rusty



Moderator
*****
Joined Nov 5, '07
From New Zealand
Currently Offline

Reputation: 3 (100%)




a ST202 engine is:
3S-FE
3S-GE
3S-GE redtop BEAMS

will work with your manual(?) GT transmission which is:
S54

Yes it will be FWD.
Yes it will require rewiring in


--------------------
post Mar 15, 2012 - 2:36 AM
+Quote Post
hjesse11

Enthusiast

Joined Aug 1, '11
From Pittsburgh
Currently Offline

Reputation: 0 (0%)




QUOTE (Rusty @ Mar 15, 2012 - 1:59 AM) *
a ST202 engine is:
3S-FE
3S-GE
3S-GE redtop BEAMS

will work with your manual(?) GT transmission which is:
S54

Yes it will be FWD.
Yes it will require rewiring in

Yes, manual, sorry about that and its the 3S-GE ST202. And how much rewiring? The engine will mach all the mounts and bolt right up to the trranny then? If so thatd be awesome.

This post has been edited by hjesse11: Mar 15, 2012 - 2:53 AM
post Mar 15, 2012 - 8:59 AM
+Quote Post
KAOS



Enthusiast
*****
Joined Apr 18, '06
From Calgary, Canada
Currently Offline

Reputation: 37 (100%)




QUOTE (hjesse11 @ Mar 15, 2012 - 1:36 AM) *
QUOTE (Rusty @ Mar 15, 2012 - 1:59 AM) *
a ST202 engine is:
3S-FE
3S-GE
3S-GE redtop BEAMS

will work with your manual(?) GT transmission which is:
S54

Yes it will be FWD.
Yes it will require rewiring in

Yes, manual, sorry about that and its the 3S-GE ST202. And how much rewiring? The engine will mach all the mounts and bolt right up to the trranny then? If so thatd be awesome.


I am in the process of this right now... swapping my GT-S to a ST202 revIII 3SGE. So far - everything fits properly other than the harness which will need to be extended or another hole drilled into the firewall.

FYI the ST202 's were never AWD- you might be thinking the ST205's (which are GT-Fours).


--------------------
post Mar 15, 2012 - 9:41 AM
+Quote Post
FORGMANN

Enthusiast
***
Joined Dec 11, '04
From USA
Currently Offline

Reputation: 12 (83%)




I am doing a 3sge as well and it will be plug and play but i sourced all the wiring from a Euro spec 94 with LHD harness. No easy to find and not cheap. Mainly extending harness is bigest issue on RHD harness. Wiring changes are similar to st205 swap.

Also take note if buy engine and what gearbox you get. I was lucky to get E56 LSD box but added another 400 in sourcing axles and mounts

This post has been edited by FORGMANN: Mar 15, 2012 - 9:45 AM


--------------------
Old guy with the toys
95 ST205 WRC (the real deal)
94 MR2 HARDTOP Supercharged 2GR/6SPD 22 owned
post Mar 15, 2012 - 11:10 AM
+Quote Post
hjesse11

Enthusiast

Joined Aug 1, '11
From Pittsburgh
Currently Offline

Reputation: 0 (0%)




Oh, okay, didnt realize its a fwd model. And i wasnt sure sine i have a 2.2 whether the tranny would bold up to the 2.0. So i should make sure its an E56 box. Explain that for me? Im not big into all this swap work. I was just gonna get another car but i cant part with her ha.
post Mar 16, 2012 - 12:22 AM
+Quote Post
FORGMANN

Enthusiast
***
Joined Dec 11, '04
From USA
Currently Offline

Reputation: 12 (83%)




Down side to E56 is sourcing axles and viscous coupling LSD will wear out over time and by 100,000 miles you have open diff again
If cost is an issue get one with s54


--------------------
Old guy with the toys
95 ST205 WRC (the real deal)
94 MR2 HARDTOP Supercharged 2GR/6SPD 22 owned
post Mar 16, 2012 - 8:47 PM
+Quote Post
hjesse11

Enthusiast

Joined Aug 1, '11
From Pittsburgh
Currently Offline

Reputation: 0 (0%)




Cost is an issue right now, if the head is cracked then i will be getting a new engine. If i can find a 2.0 for relatively same price as a 2.2 then i wanna do the swap. Whats the difference between the E56 and E54??
post Mar 16, 2012 - 9:30 PM
+Quote Post
KAOS



Enthusiast
*****
Joined Apr 18, '06
From Calgary, Canada
Currently Offline

Reputation: 37 (100%)




QUOTE (hjesse11 @ Mar 16, 2012 - 7:47 PM) *
Cost is an issue right now, if the head is cracked then i will be getting a new engine. If i can find a 2.0 for relatively same price as a 2.2 then i wanna do the swap. Whats the difference between the E56 and E54??


The E56 has a LSD in the differential. (Limited Slip Differential).

Are there any pins that need to be swapped when moving from the 2.2L 5SFE to the 2.0L 3SGE?

I have the ECU, Harness and Fuse box out of a ST202.


????

This post has been edited by KAOS: Mar 16, 2012 - 9:31 PM


--------------------

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 26th, 2024 - 7:08 PM