 Low idle on cold start |
  |
 Mar 30, 2012 - 4:10 PM
|
 
|
 Enthusiast  Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%)  |
Every time I have a cold start in cold temperature like around 45-55 degrees it'll crank up to 800rpm then goes down to 100rpm then goes back up to 200rpm. The only way I can get it to jump back up to the normal (850rpm) is to rev it up pass 3000rpm then it'll come back down to 850rpm. After that it'll idle normal. I was told there was something like a cold air control or something like that? I have a 97 Toyota Celica GT and the only mod I have is a injen short ram. That can't be the problem because it's done it before with the stock intake. Anyone know what can be the problem?
-------------------- |
|
Mar 30, 2012 - 5:19 PM
|
|
|
Enthusiast Joined Jun 7, '09 From essex,uk Currently Offline Reputation: 0 (0%) |
try cleaning out the idle control valve.
|
|
Mar 30, 2012 - 11:54 PM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
I'll second that. I suggest you remove it from the car and clean it and make sure to pick the carbon off of it. It rotates back and forth to let more or less air past. Usually it gets clogged up with carbon, you can take the coil off the end and pull the part out to really clean it good.
-------------------- |
|
Mar 31, 2012 - 2:50 PM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (Bitter @ Mar 30, 2012 - 11:54 PM)  I'll second that. I suggest you remove it from the car and clean it and make sure to pick the carbon off of it. It rotates back and forth to let more or less air past. Usually it gets clogged up with carbon, you can take the coil off the end and pull the part out to really clean it good. What should I clean it with? I'm from California and I don't know if carb cleaner is legal here. QUOTE (Bitter @ Mar 30, 2012 - 11:54 PM) I'll second that. I suggest you remove it from the car and clean it and make sure to pick the carbon off of it. It rotates back and forth to let more or less air past. Usually it gets clogged up with carbon, you can take the coil off the end and pull the part out to really clean it good. What should I clean it with? I'm from California and I don't know if carb cleaner is legal here. -------------------- |
|
Mar 31, 2012 - 2:55 PM
|
|
|
Enthusiast Joined Mar 11, '06 From Way South Chicago Currently Offline Reputation: 0 (0%) |
Seafoam Deep Creep spray, a small screw driver, and a brass brush. Make sure you have a new gasket to reinstall it to the throttle body with.
-------------------- |
|
Apr 2, 2012 - 2:32 PM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (Bitter @ Mar 31, 2012 - 3:55 PM) Seafoam Deep Creep spray, a small screw driver, and a brass brush. Make sure you have a new gasket to reinstall it to the throttle body with. Yea I decided to give a seafoam a shot. Thanks. -------------------- |
|
Apr 2, 2012 - 9:36 PM
|
|
|
Enthusiast Joined Mar 3, '05 From Richmond, B.C. Currently Offline Reputation: 0 (0%) |
How do you guys get it off without having to uninstall the throttle body as well, the screws are on the underside of the IACV?
|
|
Apr 5, 2012 - 1:18 PM
|
|
|
Enthusiast Joined Mar 8, '12 From Hanford/Fresno, Ca Currently Offline Reputation: 20 (100%) |
QUOTE (Galcobar @ Apr 2, 2012 - 10:36 PM) How do you guys get it off without having to uninstall the throttle body as well, the screws are on the underside of the IACV? I had to take off the TB. I haven't found a way to get to the screws because of the angle it's in and the hoses/wires that are in the way. -------------------- |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 26th, 2024 - 9:50 AM |