 Flush Fit Wheel Fitment, Offsets for Flush Fitment which is Proper Fitment |
  |
 Apr 13, 2012 - 9:13 AM
|
 
|
|
Enthusiast Joined Nov 26, '11 From Jersey City, NJ Currently Offline Reputation: 0 (0%)  |
any successful 9.5" or 9" ? jus wondering, would like to see some pics ..
|
|
Apr 13, 2012 - 9:12 PM
|
|
 Enthusiast  Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) |
Just to verify what im understanding,
How would: 18x8.5 +35 Front 18x9.5 +35 Rear Sit? (I can always add a 5mm spacer) I'd like the rims to be as flush as possible, no need for massive poke. Will they clear my BC Coilovers? -------------------- |
|
Apr 16, 2012 - 5:28 PM
|
|
 Enthusiast Joined May 31, '11 From Rochester, NY Currently Offline Reputation: 5 (100%) |
My Enkei's are 7" wide and +35. They sit in about an inch in the rear and quarter inch to half in the front. I think 8.5 and 9.5 would be perfect. The only place I can see an issue with is inside near the strut.
-------------------- 1994 Toyota Celica GT-S 5S-FE 190k Miles. Project car 1992 Toyota Celica GT 5S-FE 170k Miles. Daily driver/beater 1999 Toyota Camry LE 5S-FE 216K Miles. RIP You will be missed.  *ASE Certified General Manager |
|
Apr 16, 2012 - 5:52 PM
|
|
|
Enthusiast Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) |
Yeah that was my main concern, but I think my coilovers are a lot thinner than the oem so it should be fine. Thinking of 18x8+25 now haha
-------------------- |
|
Apr 16, 2012 - 5:53 PM
|
|
|
Enthusiast Joined May 31, '11 From Rochester, NY Currently Offline Reputation: 5 (100%) |
QUOTE (Timmyface @ Apr 16, 2012 - 6:52 PM)  Yeah that was my main concern, but I think my coilovers are a lot thinner than the oem so it should be fine. Thinking of 18x8+25 now haha That should be pretty flush for all four. You may need spacers for the rear. -------------------- 1994 Toyota Celica GT-S 5S-FE 190k Miles. Project car 1992 Toyota Celica GT 5S-FE 170k Miles. Daily driver/beater 1999 Toyota Camry LE 5S-FE 216K Miles. RIP You will be missed. *ASE Certified General Manager |
|
Apr 16, 2012 - 7:07 PM
|
|
|
Enthusiast Joined Apr 17, '10 From Maitland, NSW Currently Offline Reputation: 3 (100%) |
Edit: 18x9+25 for rear haha. Rims that fit are just hard to come by
-------------------- |
|
Apr 16, 2012 - 7:10 PM
|
|
|
Enthusiast Joined May 31, '11 From Rochester, NY Currently Offline Reputation: 5 (100%) |
Wait... my Enkeis are -35.... *confused*
-------------------- 1994 Toyota Celica GT-S 5S-FE 190k Miles. Project car 1992 Toyota Celica GT 5S-FE 170k Miles. Daily driver/beater 1999 Toyota Camry LE 5S-FE 216K Miles. RIP You will be missed. *ASE Certified General Manager |
|
Apr 16, 2012 - 7:17 PM
|
|
 Enthusiast Joined Oct 20, '08 From Seattle, WA Currently Offline Reputation: 5 (100%) |
QUOTE (RabidTRD @ Apr 16, 2012 - 5:10 PM) Wait... my Enkeis are -35.... *confused* No, +35. Negative offset is some EXTREME dish. -------------------- 2006 BMW 330i - 6 Speed - Dinan Stage 1
2014 Toyota Rav4 XLE |
|
Apr 16, 2012 - 7:55 PM
|
|
 Enthusiast Joined Dec 26, '09 From Albuquerque, NM Currently Offline Reputation: 19 (100%) |
QUOTE (Cudi @ Apr 13, 2012 - 8:13 AM) any successful 9.5" or 9" ? jus wondering, would like to see some pics .. This guy has 18x9.5 wheels. Of course, he has a GT-Four... dunno how different the procedure would be for SuperStrut. But it's worth a PM http://www.6gc.net/celicas/st205-14183 -------------------- taking too long to mod since '09
June '12 COTM '95 AT200 |
|
Apr 16, 2012 - 8:05 PM
|
|
 Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
with natural camber you can fit pretty wide wheels, for sure up to 9.5 but you gotta figure out the offset, plus you can still pull if you want to. 7th gens are running 9.0-9.5-10 with roll and pull, with 10-20 offsets at the lowest ive seen. 7th gen clubs seem to be more into flush scene than the 6th gens. i have both gens, and our gens seem to have lots of room when I look at both cars.
This post has been edited by trdproven: Apr 16, 2012 - 8:05 PM -------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
Apr 17, 2012 - 12:13 AM
|
|
 Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
This is flush lol 18x8.5 et23 rear et33 front
--------------------  |
|
Apr 17, 2012 - 12:16 AM
|
|
 Enthusiast Joined Feb 1, '12 From The Colony, TX Currently Offline Reputation: 1 (100%) |
QUOTE (diegohiga @ Apr 17, 2012 - 1:13 AM) This is flush lol 18x8.5 et23 rear et33 front what does et23 mean? cuz i have those same wheels in 17x8.5. 5zigen gn+ |
|
Apr 17, 2012 - 12:22 AM
|
|
|
Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
what does et23 mean? cuz i have those same wheels in 17x8.5. 5zigen gn+
[/quote] Offset the offset of these wheels are 48 but i have 25mm spacers on the back and 15mm on the front that makes the offset of my wheels 23 on the back and 33 on.the front -------------------- |
|
Apr 17, 2012 - 2:11 AM
|
|
|
Enthusiast Joined Aug 2, '05 From Guam Currently Offline Reputation: 15 (100%) |
^ sounds like you can run wider wheels, i assume your camber is not hella negative?
-------------------- 94 Celica GT
|Toyota OEM Japan|Toyota Racing Development|Tom's|Competition Clutch|5Zigen|Apexi| |Laille/Beatrush|Magnecor|Denso|Royal Purple|Optima|PIAA|PW JDM|Megan Racing|Nitto| |Work|Greddy|Samco|Project Mu|H&R|Gates|Moog|Rota|Yokohama|Epman|1320|Upgr8 04 Celica GT |Toyota OEM Japan|Toyota Racing Development|Tein|BC Racing|Greddy| |
|
Apr 17, 2012 - 11:09 AM
|
|
|
Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
QUOTE (trdproven @ Apr 17, 2012 - 3:11 AM) ^ sounds like you can run wider wheels, i assume your camber is not hella negative? Yeah i could use 9.5 wheels high.a higher.offset but i think 8.5 wide is good enough. And yes it is negative. My tires show the camber wear a lot. -------------------- |
|
Apr 17, 2012 - 11:13 AM
|
|
|
Enthusiast Joined May 4, '09 From coral springs florida US Currently Offline Reputation: 21 (100%) |
QUOTE (Timmyface @ Apr 13, 2012 - 10:12 PM) Just to verify what im understanding, How would: 18x8.5 +35 Front 18x9.5 +35 Rear Sit? (I can always add a 5mm spacer) I'd like the rims to be as flush as possible, no need for massive poke. Will they clear my BC Coilovers? I would get 18x8.5+35 all around and get 15mm spacers.for the back. Will sit pretty flush! -------------------- |
|
Apr 19, 2012 - 6:37 AM
|
|
|
Enthusiast Joined Nov 26, '11 From Jersey City, NJ Currently Offline Reputation: 0 (0%) |
QUOTE (HectortheRican @ Apr 16, 2012 - 7:55 PM) This guy has 18x9.5 wheels. Of course, he has a GT-Four... dunno how different the procedure would be for SuperStrut. But it's worth a PM http://www.6gc.net/celicas/st205-14183 thats jus a PERFECT ride,.. thanks Here are some pics of 17x10 on my ST. BTW, i totally disagree with the look, rims are off until coils and cambers are found and bought. ..where?     
|
|
Apr 19, 2012 - 7:31 AM
|
|
 Enthusiast Joined Dec 22, '06 From Columbia, MD Currently Offline Reputation: 13 (100%) |
jeebus! look at that gap!
--------------------  1995 GT::::Diffusing the Situation エキサイティングカーレーシングチーム! march 2010 COTM : 6GC feature 2014 : january 2015-2016-2018 COTM |
|
Apr 19, 2012 - 8:17 AM
|
|
|
Enthusiast Joined Jun 18, '09 From Orlando Currently Offline Reputation: 8 (100%) |
Does look better than I thought. Drop that sucker!
-------------------- '97 ST \ Eibach \ KYB \ Kenwood \ Alpine \ Cusco \ OEM+ [sold 10/18]
'93 MX-5 LE |
|
Apr 20, 2012 - 5:47 AM
|
|
|
Enthusiast Joined Nov 26, '11 From Jersey City, NJ Currently Offline Reputation: 0 (0%) |
QUOTE (Tigawoods @ Apr 19, 2012 - 7:31 AM) jeebus! look at that gap! JEEBUS... <-- LOL QUOTE (SwissFerdi @ Apr 19, 2012 - 8:17 AM) Does look better than I thought. Drop that sucker! Workin on it,.. soon ! =] i saw the thread for coils, is there one for cambers ? |
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 9:37 PM |