6G Celicas Forums

Thank you very much!

Should i replace the insterts of the engine mounts.for.those red ones? I dont know the brand.name.of it.

Kirkosauras inserts? They go over the stock mount inserts, not instead of. Yeah, I would recomend them.

Ohh ok ok didnt know that. And i think a memeber here sell those right? Or where should i get them from?

He's a member both here and the mr2 forums. Though he's almost never here.

I ordered mine from his site: http://home.comcast.net/~kirkosaurus2/MR2_...ts_ordering.htm.

Excelent! Thanks for the info and help!

I need some help here please. i have read many many theads of 3sgte swaps, but im not a mechanic and there are many stuff im still missing.
this is what i have so far.
3rd gen 3sgte
e153 tranny from a mr2
st185 axles
mr2 axles
gt4 shift cables
greddy BOV
hks turbo timer
intercooler
automotive fuel pressure

i still need a fuel pump and im sending my harness to tweak, but there are some other stuff that i think i still missing

like this... waht is this??? brake fluid?? do i need to get this front a gt4 or should I move the one from the 7a?? and what else ill be missing to do this complete swap? the threads are very helpful but i need a direct direccions to what to get lol

batman thanks for the picture

This post has been edited by diegohiga: May 8, 2012 - 10:34 PM

Power steering fluid reservoir I believe.

Yep thats the ps fluid reservoir

Ok so i need to get that too.. Do i need the replace the power steering pump from the gt4 too?

Ill look in the garage in the morning i might still have an extra one since i deleted my ps from the 1mz swap

Did you find it?

Just looked an i still have it
Pm me a shipping address an ill figure out a price shipped

Doesn't look like you have to, I think you just run new lines to the res.

Yeah i was thinking that too. I just wanna know what else im missing. Because i dont want to start the swap and realized im missing something else. What else i need to get besides these parts:
Complete 3sgte with tranny
Hybrid axles
Converted harness
All the mounts
Gt4 shifter cable

Is there any small componets i need to get that i cant use it from the st?
And should i use the fuel pump from the supra non turbo?

so do you not want the rest
I only want like 5 plus shipping

What rest? Im saying that i dont know what else im missing. I want evrything i am miasong for this swap!!!

I typed resv
My stupid smart phone put rest

You are going to need off the top of my head:

Rad w/hoses - ST is to small.
If you do not have the IC relay box that comes with a clip, you will be needing that too. Depends also on which IC route you are going. OEM or FMIC
If you want AC, going to have to work that into the equation. Not positive on how to go about that, working on it myself.
Full exhaust overhaul
Gauges, and you'll need to change out your tact to match the new.

If I remember anymore I'll edit =P

Do you have your whinebro fuel pump?

This post has been edited by rave2n: May 12, 2012 - 10:16 PM

Yes im geting a megan racing radiator i dont think is bad and ahould be better than oem and its more affordable than mishimoto or koyo
Ill be using front mount IC. So i need the relay box that is next to the radiator if im using a top mount? (Little confuse)
Ill check about the AC because i deff want it.
Exhaust... I got that
Gauges, BOV, fuel pressure regulator and turbo timer got it.
Bit my main consern is what small componets in the engine bay ill be missing?? Anyone? Or thats all i need?