6G Celicas Forums

Hey all,

So I've ran into my first issue with the body kit I bought. I'm hoping anyone knows anything about the turn signals not lining up?

I will upload some pictures tomorrow in the light, But the issue is that my stock turn signals, will not fit into the kit. They stick out on the outside edges, and dont even come close to sitting flush. About 1/2 inch or better all around it.

Is this suppose to be like that, or am I just missing something?

Thanks

The stock ones won't fit into most aftermarket bumpers.

fits on ours

so should i look into aftermarket, or yellow, how did you get yours to fit?

yea that's the biggest mystery!!!!!!!!!!!!!!!!!!!!

I've purchased every light imaginable only thing i can come up with is have the auto-body guy custom mold it to fit and look flush.

I have no clue or idea how in some pics they seem to look extremely clean just not possible. People say they done it but never explain how and yes you will search and search and finally search and come up with empty

This post has been edited by timdog1720: Sep 24, 2012 - 8:37 PM

AMEN on that! lol. But do you know of anyone on here that did it, that i could possibly pm about?

you need 90-93 5th gen Celica front turn signals from the n/a models. Get the clear ones that they sell on ebay. A original c-one front bumper for st202 should fit 96-99 turn signals but yours is not original. I think the c-one company if you buy from them gives you certain type of lights if I remember hearing correctly from other members.