6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Does anyone know this Part Number?
post Oct 8, 2012 - 3:10 PM
+Quote Post
DIONYZUZ

Enthusiast
*
Joined Oct 29, '09
From Chicago
Currently Offline

Reputation: 2 (100%)




pic
Does anyone know the Part number to this pad that attaches to the fender to support the hood? One time I had to take a dent out by removing the driver's side fender and the bolts came off all rusted and then I lost this pad on the driver's side. I tried ordering it off the trdparts.com store by trying to describe the part, but they just sent me washers. Any help or advice is greatly appreciated. It looks like I'm going to have a mechanic shop to take out these bults that are stuck inside the fender, because idk how I would do it my self. here's a pic:
pic2

This post has been edited by DIONYZUZ: Oct 8, 2012 - 3:13 PM
post Oct 8, 2012 - 6:33 PM
+Quote Post
XS1V

Enthusiast

Joined Apr 22, '10
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




QUOTE (DIONYZUZ @ Oct 9, 2012 - 8:10 AM) *
pic
Does anyone know the Part number to this pad that attaches to the fender to support the hood? One time I had to take a dent out by removing the driver's side fender and the bolts came off all rusted and then I lost this pad on the driver's side. I tried ordering it off the trdparts.com store by trying to describe the part, but they just sent me washers. Any help or advice is greatly appreciated. It looks like I'm going to have a mechanic shop to take out these bults that are stuck inside the fender, because idk how I would do it my self. here's a pic:
pic2


Left & Right side: 53384‑34010

Brad
post Oct 8, 2012 - 7:03 PM
+Quote Post
njccmd2002



Enthusiast
*****
Joined Mar 15, '07
From Tennessee
Currently Offline

Reputation: 52 (100%)




get it off a junyard


--------------------
Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL

If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in

2grfe Swapped... Why I chose the 2GR, before you ask read here...

A great civilization is not conquered from without until it has destroyed itself from within.


@llamaraxing in Instagram is the best way to find me. I hardly log here anymore.
post Oct 9, 2012 - 10:54 AM
+Quote Post
DIONYZUZ

Enthusiast
*
Joined Oct 29, '09
From Chicago
Currently Offline

Reputation: 2 (100%)




Yea I just tried about 3 junkyards in my area, and they have no 6gcs. All the celicas are on the road! lol

QUOTE (XS1V @ Oct 8, 2012 - 7:33 PM) *
QUOTE (DIONYZUZ @ Oct 9, 2012 - 8:10 AM) *
pic
Does anyone know the Part number to this pad that attaches to the fender to support the hood? One time I had to take a dent out by removing the driver's side fender and the bolts came off all rusted and then I lost this pad on the driver's side. I tried ordering it off the trdparts.com store by trying to describe the part, but they just sent me washers. Any help or advice is greatly appreciated. It looks like I'm going to have a mechanic shop to take out these bults that are stuck inside the fender, because idk how I would do it my self. here's a pic:
pic2


Left & Right side: 53384‑34010

Brad

Are you sure they're the same part number? It looks like they are both opposites at each side... Or are you saying that's the part number to get both the left and right side pads?
post Oct 9, 2012 - 2:00 PM
+Quote Post
XS1V

Enthusiast

Joined Apr 22, '10
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




QUOTE (DIONYZUZ @ Oct 10, 2012 - 4:54 AM) *
Are you sure they're the same part number? It looks like they are both opposites at each side... Or are you saying that's the part number to get both the left and right side pads?


Yup I am 100% sure, the rubbers are same both sides smile.gif

Brad
post Oct 9, 2012 - 2:27 PM
+Quote Post
cheela



Enthusiast
*****
Joined Feb 2, '07
From Berlin, WI
Currently Offline

Reputation: 18 (100%)




there's a couple 6gcs in the junk in my area. I'm making a few last trips there. I can grab that if you want.


--------------------

*1997 Celica ST - 3SGE Greytop BEAMS
*1977 Celica RA29 - Classic Cruiser
*2005 Matrix AWD - dedded but still hanging around like a ghost
2019 Rav4 XLE Premium - Sports mode is fun.
post Oct 9, 2012 - 7:54 PM
+Quote Post
DIONYZUZ

Enthusiast
*
Joined Oct 29, '09
From Chicago
Currently Offline

Reputation: 2 (100%)




QUOTE (cheela @ Oct 9, 2012 - 3:27 PM) *
there's a couple 6gcs in the junk in my area. I'm making a few last trips there. I can grab that if you want.

The trd website is just charging $6 I dont think it would be worth your time and the money, it would be ok if I just buy from trd... Unless if you can get that bumper (with driver's side bracket) and a headlightlight relay I would buy. smile.gif

QUOTE (XS1V @ Oct 9, 2012 - 3:00 PM) *
QUOTE (DIONYZUZ @ Oct 10, 2012 - 4:54 AM) *
Are you sure they're the same part number? It looks like they are both opposites at each side... Or are you saying that's the part number to get both the left and right side pads?


Yup I am 100% sure, the rubbers are same both sides smile.gif

Brad

Thanks, Brad. I did check from an online schematic from the PN you gave and it's actually the bumper that's the same, but the bracket that is different on both sides and I'm missing the bumper and bracket on one side.

This post has been edited by DIONYZUZ: Oct 9, 2012 - 7:55 PM
post Oct 10, 2012 - 2:57 AM
+Quote Post
XS1V

Enthusiast

Joined Apr 22, '10
From Auckland, New Zealand
Currently Offline

Reputation: 0 (0%)




No worries, you didnt mention you needed that smile.gif

Left - 53385-20020
Right - 53386-20020

Brad

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 28th, 2024 - 12:39 PM