 replacement engine or save this one? |
  |
 Oct 8, 2012 - 2:19 PM
|
 
|
|
Enthusiast Joined May 29, '12 From California Currently Offline Reputation: 0 (0%)  |
I have a 94 st stock motor and everything. however the engine like all Toyotas it got an oil leak 3 years ago I think I've tried random leak fixers here and there and nothing's fixed it completely and now I do believe my head gasket is blown or is about to go the car runs rich blows white smoke out the pipe and over heats super fast so its a pretty safe bet I think. my question is do you guys think its work fixing the motor up and having a shop look at it or just tell them to replace the whole stupid thing I'm guessing their both going to be expensive. oh! the motor has 200,000+ miles to if that helps thanks for reading!
|
|
Oct 8, 2012 - 2:50 PM
|
|
 Enthusiast  Joined Oct 29, '11 From Haltom City, Texas Currently Offline Reputation: 1 (100%) |
Sounds like you have the perfect opportunity to learn how to change a headgasket.
Fourtunately you have the ST, I wouldnt recommend removing the head on the GT for a novice. A full rebuild isnt a bad idea, but it will cost you 5-10 times what the head gasket alone will This post has been edited by Special_Edy: Oct 8, 2012 - 2:51 PM |
|
Oct 8, 2012 - 6:14 PM
|
|
|
Enthusiast Joined May 29, '12 From California Currently Offline Reputation: 0 (0%) |
do you have any tips on how to or should I just go look around the web more? the st is easier? do you think I could hold off on a rebuild then
|
|
Oct 8, 2012 - 7:20 PM
|
|
|
Enthusiast Joined May 29, '12 From California Currently Offline Reputation: 0 (0%) |
ohh and also am I going to need to take out the motor to repair a h.g. I know you usually don't have to but celicas pile everything up so much I'm not sure
|
|
Oct 8, 2012 - 9:35 PM
|
|
 Enthusiast Joined May 3, '11 From Ohio Currently Offline Reputation: 8 (100%) |
To just do the head gasket, you can leave the motor in. Some of the other seals are more tricky, but you could remove it and have access to everything you need.... but def cheaper to remove a motor and replace some seals and a head gasket before you destroy the motor than it is to replace it.
--------------------  |
|
Oct 8, 2012 - 10:55 PM
|
|
|
Enthusiast Joined May 29, '12 From California Currently Offline Reputation: 0 (0%) |
okay thanks man:)
|
|
Oct 9, 2012 - 1:02 AM
|
|
|
Enthusiast Joined Dec 8, '03 From Lancaster CA Currently Offline Reputation: 6 (100%) |
first off where in CA are you? secondly a full rebuild is what i recommend. yes you could get back on the road by just doing the HG, however any other seal could go at any time. i have a very detailed guide on how to rebuild the 7A engine in the stickies. read it over and over. if you do all the work the rebuild will cost you 700 bucks
-------------------- 2001 Celica GT-S Turbo
1997 Supra TT 6speed 1997 Celica 3MZ/1MZ swap 1990 Celica All-Trac |
|
Oct 9, 2012 - 11:27 AM
|
|
|
Enthusiast Joined May 29, '12 From California Currently Offline Reputation: 0 (0%) |
I'm in Sacramento. and alright I will look at it I figured it was about time for one anyways. is the wiring for it complicated?
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 11:45 AM |