Rear View Mirror |
Rear View Mirror |
Jan 4, 2013 - 6:46 PM |
|
Enthusiast Joined Jan 2, '13 From timothy0 Currently Offline Reputation: 0 (0%) |
I got a grey rear view mirror and backseat back rests(black) from my local junkyard from a 94 celica gt(my car has tan interior). To my understanding the rear view mirror just pops out. Any tips on putting it back in? I had trouble putting it back on so I decided to stop. There is a plastic bezel that fit in a molding. Also while we are on the topic of interior I was looking to clean then rit dye my carpet black. I was also going to redo my headliner. My main problem is the rear view mirror and carpet removal. Found the sticky for the headliner. Also awesome forum you guys got going on!
This post has been edited by Timothy: Jan 4, 2013 - 6:47 PM |
Jan 5, 2013 - 2:57 PM |
|
Enthusiast Joined Jan 2, '13 From timothy0 Currently Offline Reputation: 0 (0%) |
Took out my old rear view mirror to replace it with a new one. It pops in but does not stay :|
|
Jan 8, 2013 - 5:24 PM |
|
Enthusiast Joined May 12, '06 From Wilmington, NC Currently Offline Reputation: 45 (100%) |
for the rear view mirror you have to pop the plastic cover off the part that is against the headliner with a small screwdriver, and then there is 2 phillips screws to take out. If you take the screw out of the back of the mirror part it just falls inside and then your mirror will be floppy... I found this out the hard way. Also be careful not to strip out those phillips screws, I stripped like 3 of them out at the junkyard trying to get a new mirrior for my car.
-------------------- 94 GT - Sold -------- 69 Pontiac Lemans - Sold 88 Alltrac - Sold ---- 04 WRX - Sold 00 GT-S - Sold ------ 91 Miata - project/drift car 95 GT - Sold -------- 96 GT - New Daily Drive |
Jan 16, 2013 - 8:02 PM |
|
Enthusiast Joined Apr 30, '12 From Wellington, NZ Currently Offline Reputation: 0 (0%) |
|
Aug 2, 2020 - 3:26 PM |
|
Enthusiast Joined May 28, '20 From Florida Currently Offline Reputation: 0 (0%) |
If you take the screw out of the back of the mirror part it just falls inside and then your mirror will be floppy... I found this out the hard way. Had this happen to me today, but I went and fixed it. Super old topic but I figured some pics of the inside of the mirror would be useful to someone And as you can see in one of the pics, that thing is NOT getting beck in place unless you put it there. |
Aug 11, 2020 - 7:31 PM |
|
Enthusiast Joined Apr 24, '08 From Orange County, CA Currently Offline Reputation: 33 (100%) |
how did you remove the mirror part without breaking it? i did this to my original and i broke it. i didnt want to mask off the mirror to paint it black.
-------------------- Group buy to replicate Narrow E series transaxle parts
http://www.6gc.net/forums/index.php?showto...p;#entry1107514 |
Lo-Fi Version | Time is now: November 26th, 2024 - 9:07 PM |