jdm SIDEMIRROR wiring INFO - 6G Celicas Forums

jdm SIDEMIRROR wiring INFO, attention NEVERSTOP, CTCAT2049

Nov 2, 2004 - 5:14 PM
turboinduction View Member Profile Enthusiast Joined Feb 25, '04 From Wisconsin Currently Offline Reputation: 0 (0%)	I emailed the writer of that how-to. If he emails me back i'll let you guys know. -Ti

Nov 2, 2004 - 7:27 PM

turboinduction

Enthusiast

Joined Feb 25, '04
From Wisconsin
Currently Offline

Reputation: 0 (0%)

First Reply from Silver GT

QUOTE

Hi Ti,
I didn't get a relay with mine, just the mirrors and the control unit. I'm not sure what a relay would do. I had no instructions at all with mine and the guy who sold me them wouldn't answer my emails when I started asking questions, so basically I just pulled everything apart to find out how it worked (I'm an electrician so it wasn't too hard).

I'm away from home at the moment, visiting relatives, so I've got nothing with me, but I'll be home on thursday and I'll have a look at the drawings and notes I made and see if I can help.

Graham

Well, I guess well have to wait and see

-Ti

Nov 2, 2004 - 8:29 PM
NEVERSTOP View Member Profile Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)	okay guys where gonna need to pool everything together that we know. My relay has ten pin plugs on the back of it... kinda looks like this I also didn't get the male side of the harness for the JDM relay.. so I had to make my own.. luckily I had an extra harness plug layin around and only had to add two new wires into it to make it work and the part numbers on the back of my relay are as follows: Green circut board #:183362 Harness (female side) #:361-2030 That how to is very helpful.. but think I will have to rely on the pin numbers and not the wire colors. If someone else has the 10 pin style that came with the stock wires still on it PLEASE follow the diagram above for the #'s Like: 1:white with blue strip 2:pink with silver spots ETC -------------------- 99 project version 3.0.. hello SEMA 2010 =)

Nov 2, 2004 - 9:17 PM
turboinduction View Member Profile Enthusiast Joined Feb 25, '04 From Wisconsin Currently Offline Reputation: 0 (0%)

Nov 2, 2004 - 10:16 PM
NEVERSTOP View Member Profile Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)	okay thats weird then TI.. cuz the harness I used had those wires EXACTLY before I added two extras.. but why the 2 extra pins in the female harness???? Also.. some bad news for you guys... the mirror swap doesnt work on the drivers side.. at least not like the pass did try adding washers to some of the screws to give the assembly more of an angle and that works but the mirror sticks out too far and when its folded back will hit the part of the mirror attached to the door. this weekend I am gonna try and tear apart both mirrors.. USDM and JDM and see if I can swap the mounting part inside.. will photoshop some pics to explain better what I am talking about -------------------- 99 project version 3.0.. hello SEMA 2010 =)

Nov 2, 2004 - 10:55 PM
turboinduction View Member Profile Enthusiast Joined Feb 25, '04 From Wisconsin Currently Offline Reputation: 0 (0%)	Hey Never, Just thought about it I did that drawing with the wiring pointing to me, and the harness plugged in. If you at looking at the front of the harness (the part that plugs in, the just mirror the image over. I dont know why there are 2 extra pins either - hum. This might be bigger than I thought. I'll do some work this weekend.

Nov 2, 2004 - 11:04 PM
NEVERSTOP View Member Profile Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)	well if you read the howto thing all the wires are the exact same as ours and his except theres one extra wire in his.. I'm gonna try and get the drivers working TONIGHT! LOL his how to seems pretty straight forward though and I got a ton of extra harnesses with my mirrors so hopefully I can figure em out -------------------- 99 project version 3.0.. hello SEMA 2010 =)

Nov 2, 2004 - 11:32 PM
NEVERSTOP View Member Profile Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)	hey one of you guys.. do me a favor really quick.. run out to your car with the JDM relay and plug it into your stock wiring harness and see if the mirrors will work like up down sides.. according to this guys howto it should -------------------- 99 project version 3.0.. hello SEMA 2010 =)

Nov 2, 2004 - 11:55 PM
WannabeGT4 View Member Profile Enthusiast Joined Oct 10, '03 From Wichita, KS Currently Offline Reputation: 5 (100%)	Hey Neverstop! You want an avatar that has a seemless loop to it? Cause here it is. -------------------- Project ST204.5 99.88946% complete...

Nov 3, 2004 - 12:03 AM
NEVERSTOP View Member Profile Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)	naw takes too long.. what I want is my MIRRORS to do that! errrrgh,., think that guys howto is not accurate for the USDM celi -------------------- 99 project version 3.0.. hello SEMA 2010 =)

Nov 3, 2004 - 12:20 AM
Batman722 View Member Profile Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%)	just some posts about them from the UK board http://www.celica-club.co.uk/cgibin/phpbb2...pic.php?t=20650 http://www.celica-club.co.uk/cgibin/phpbb2...pic.php?t=18374 http://www.celica-club.co.uk/cgibin/phpbb2...pic.php?t=14714 all info is good... -------------------- my st205 swap and our Beams swap

Nov 3, 2004 - 12:39 AM
NEVERSTOP View Member Profile Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%)	I give up -------------------- 99 project version 3.0.. hello SEMA 2010 =)

Nov 3, 2004 - 1:21 AM

turboinduction

Enthusiast

Joined Feb 25, '04
From Wisconsin
Currently Offline

Reputation: 0 (0%)

QUOTE (NEVERSTOP @ Nov 2, 2004 - 11:39 PM)

I give up

is there room on that bench.....

Nov 3, 2004 - 2:04 AM
Batman722 View Member Profile Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%)	so no one ( USDM people ) have gotten these to work ? -------------------- my st205 swap and our Beams swap

Nov 3, 2004 - 3:15 AM

NEVERSTOP

Enthusiast

Joined Nov 4, '02
From Davenport Iowa
Currently Offline

Reputation: 0 (0%)

QUOTE

so no one ( USDM people ) have gotten these to work ?

Not that I know of.. I have gotten all of the functions to work at one point or another but can't seem to make em all work with the same wiring.....

Its like 50% of them are + leads even though thats impossible for them to all be that way.... the retracing mirrors seem to work where the current is reversed threw the same 2 or 3 wires but cant seem to figure that one out either

I have tired wiring it as close as possible to the way the Howto said... NOPE dont work, have tried matching the same pins.. not that either... have color matched.. nadda.. have tried hit and miss.. all that got be was a shorted out circut that I managed to fix

Im starting to wonder if my relay was damaged to begin with but cant see ne visable signs other than the short I put into it

I can get the mirror to work just fine by using a batter and some wires..and can get power to go threw the relay using a wire tester but when I hook the wires up to the mirror via the relay it DOENST do nething... theres even power to the wires@! and the same pins... might be a problem with neutral/chassie wire but who knows have tried running a seperate ground to the chassie and a power via the relay and that didnt work but the wire was hot so it shoulda worked

--------------------

99 project version 3.0.. hello SEMA 2010 =)

Nov 3, 2004 - 9:43 AM
turboinduction View Member Profile Enthusiast Joined Feb 25, '04 From Wisconsin Currently Offline Reputation: 0 (0%)	I'll try my JDM relay this weekend

Nov 3, 2004 - 9:53 AM
Batman722 View Member Profile Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%)	jeez once I get mine I will compare what harness and wire color and # of wires I have to everyone elses. We will get this all figured out. It is just a matter of time. If the mirror (folding motor) works when you hardwire it to a battery then there is still plenty of hope for this. worse comes to worse, get the left right up down to work (or not) and harewire the folding using $3 relays to reverse the polarity -------------------- my st205 swap and our Beams swap

Nov 3, 2004 - 1:32 PM
playr158 View Member Profile Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%)	you have to use the JDM control not the usdm one...it will never work with any usdm parts

Nov 3, 2004 - 5:14 PM

turboinduction

Enthusiast

Joined Feb 25, '04
From Wisconsin
Currently Offline

Reputation: 0 (0%)

QUOTE (playr158 @ Nov 3, 2004 - 12:32 PM)

you have to use the JDM control not the usdm one...it will never work with any usdm parts

that is my JDM control unit. I have all the JDM peices, including the relay... and i'm still stuck.

-Ti

Nov 3, 2004 - 5:23 PM
Defgeph View Member Profile Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%)	damn I thought you guys would make it easy for me. Has Anyone tried hooking the mirrors up to a battery and figuring out the functions of each wire ? still havent received mine yet. Wish I could shed some light. DEF -------------------- I will return one day.

« Next Oldest · Interior/Audio/Electrical/Wiring · Next Newest »

4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)

0 Members: