 Car Progress Thread (3sgte), no progress... |
  |
 Jun 2, 2007 - 11:09 AM
|
 
|
 Enthusiast  Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%)  |
What i did was buy long jumper cables something like 16 feet or 24 or something.. anywho i cut off both ends and ran the double wire through the car. its something like 4 gauge or 2 its pretty thick...
anywho now i have it grounded to the old grounds up front as well as in the trunk... overkill but worth it in my opinion. but if you ground it welll in the trunk you should be fine as long as the grounds up front arre secure |
|
Jun 11, 2007 - 3:37 PM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
June 11th:
-3 inch exhaust from the 3in DP back installed. (under axle) -2x12 Kicker subs installed and kicker amp -Re-routed vac lines -adjusted clutch pedal magnaflow high flow cat, res, and race series muffler. thats about it.. i fixed my vac lines and adjusted my clutch at the meet with the help of some pps. pics below! This post has been edited by jcbass7: Jun 29, 2007 - 8:10 PM |
|
Jun 11, 2007 - 6:19 PM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
here is one
|
|
Jun 11, 2007 - 6:28 PM
|
|
 Enthusiast Joined Mar 6, '06 From massachusetts Currently Offline Reputation: 30 (97%) |
^^WOW. She looks freakin great man.
|
|
Jun 11, 2007 - 10:21 PM
|
|
 Enthusiast Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) |
hows the hood vent working man??...any issues with boost or heat now?
|
|
Jun 12, 2007 - 2:54 PM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
QUOTE(Valo666 @ Jun 11, 2007 - 11:21 PM) [snapback]567413[/snapback] hows the hood vent working man??...any issues with boost or heat now? actually she runs a LOT better, spacing the hood like that helped a ton, i haven't gone into safe mode since!! and fixing my vac lines at the drag strip helped, she feels smoother now. I think its because i had a closed valve off the fuel rail when it should have been an open vacuum |
|
Jun 12, 2007 - 4:25 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
get that front mount on there asap!
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Jun 13, 2007 - 11:29 AM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
QUOTE(lagos @ Jun 12, 2007 - 5:25 PM) [snapback]567748[/snapback] get that front mount on there asap! haha working on it art, i just ordered the ATS throttle body inlet, now i need couplers and t-bolts |
|
Jun 22, 2007 - 8:45 PM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
June 23rd:
-Installed JDM Projectors -Installed JDM Clear Highs hanks to my brother in arms representing the USMC I now have projectors and clear highs!!   pics below!! This post has been edited by jcbass7: Jun 29, 2007 - 8:07 PM |
|
Jun 22, 2007 - 10:30 PM
|
|
 Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
great pick up Jesse
 give me a call tomorrow guy
-------------------- |
|
Jun 25, 2007 - 10:32 AM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
as promised here are the projectors and clear highs
  BUT MORE IMPORTANTLY!! I finally have all the parts (hopefully  ) for my FMIC INSTALL!!Drool over this   Spearco 26x6x3 HTS Silicon Couplers T-bolt Clamps ATS TB Inlet GReddy Type RS BOV Flange Recirculation fitting 
This post has been edited by jcbass7: Jun 25, 2007 - 10:36 AM |
|
Jun 25, 2007 - 10:35 AM
|
|
 Enthusiast Joined Oct 13, '02 From Blairstown, New Jersey Currently Offline Reputation: 6 (100%) |
Awesome.
Looks good Jesse, best of luck! -------------------- 3rd gen ST205 3SGTE - Alive and boosting. |
|
Jun 25, 2007 - 10:43 AM
|
|
 Enthusiast Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) |
sweet man. its getting there. I envy your headlights. i just cant bring myself there yet.
-------------------- |
|
Jun 25, 2007 - 10:44 AM
|
|
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
cant wait to see it installed.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Jun 25, 2007 - 10:48 AM
|
|
|
Enthusiast Joined Mar 6, '06 From massachusetts Currently Offline Reputation: 30 (97%) |
Outstanding man. Get that done ASAP. Car looks sweet.
|
|
Jun 25, 2007 - 12:02 PM
|
|
 Enthusiast Joined Oct 12, '05 From Texas Currently Offline Reputation: 59 (100%) |
AWESOME Jesse!
-------------------- Past: V6 Swapped 6G Celica, E46 BMW M3, Jeep Wrangler TJ
Current: 850rwhp C6 Corvette Grandsport, Gen1 6.2L Ford Raptor |
|
Jun 25, 2007 - 2:48 PM
|
|
|
Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
quick update
im at my buddys on his lift working etc. so far i have the spearco mounted to the crashbar, ive welded the flange onto the ic pipes and ive routed the pipes, but i gotta extend a pipe about 4 inches which should be fun. (im fairly new to welding and just getting the hang of it) but i also finished tucking the relay box while the bumper was off and now that corner of the engine bay is completly clear except for my hidden filler neck for the washer fluid! pics soon! |
|
Jun 25, 2007 - 4:06 PM
|
|
 Enthusiast Joined Feb 28, '07 Currently Offline Reputation: 1 (100%) |
wow that intercooler is badass that **** is gonna look badass installed!!!!
-------------------- BANNED. for life, you moron.
|
|
Jun 25, 2007 - 4:52 PM
|
|
 Enthusiast Joined Mar 11, '04 From Oakdale, MN Currently Offline Reputation: 3 (100%) |
Your car has come a long way, great thread. Can't wait for more pics
-------------------- -Brad
95 GSX: Stock motor, fp3065, corn = 10.9 @ 140 06 R6: Strappd and sprocketed = 11.0 @ 127 01 a4: daily 94 Celica: totaled - someday have another celica thats fast instead of looks cool |
|
Jun 25, 2007 - 5:36 PM
|
|
|
Enthusiast Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) |
the projectors look sick Jesse. Cant wait for pics of the FMIC. No more shimmed hood now..lol
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 11th, 2025 - 6:40 AM |