FS: Greddy SP1 muffler, Best offer Options

[razor7]

Hey Guys,
so since apparently I broke the non-exhistant forum rules by doing a bidding contest, this is now reposted as BEST OFFER. PM me what you are willing to pay with shipping and I'll get back to you.

So to anser some questions right off the bat:

Is the muffler in perfect condition?
- No, it has a dent on the can and the bottom of the "megaphone" tip has seen better days. However, none of these cosmetic issues are seen once it's installed.

So there's a dent on the can, has this affected the performance or sound?
- Not one bit, the muffler does not rattle, whine, or even sound like a stereotypical "ricer" In fact, the sound that's emitted is very similar to the stock exhaust, with it just being deeper and meaner.

Why are there spots left over from other hangars?
- I don't honestly know. I bought this used from some guys off of craigslist in its exact current condition. In the 8 months that it has been on my car, I haven't had any issues with rubbing or anything. I also know that this is the greddy sp1 exhaust that is specific to the celica, no other SP1s came with that same style of exhaust tip.

Why is the inlet piping larger than that of the exhaust?
- After reading around I decided on 2 1/4" piping for my custom cat back. The inlet on the muffler itself is 2", so the piping used to connect to it is slightly bigger. You can chop it off and weld on 2" piping, or go with 2 1/4" like I did.

What will be required for me to install it on my car?
- Well, you'll need to have one of the hangars re-done (chopped it off to remove it), and to have it welded to your current cat-back system. The one hangar that is still attached will hold you up and in place. I am also including the over axle made 2 1/4" piping that I had custom done in order to save you time and hassle.















Thanks and take it easy,
-TC

[Tigawoods]

its an SP2.
sp2's have that rounded lip on the tip
that muffler has seen better days lol
good luck with the sale! go greddy!

[razor7]

Bump!

-TC

[razor7]

Bump again.

Just in case you don't feel like reading the above statements, the exhaust is in perfect mechanical condition. The bruises on it came from the previous owner's dropped celica. If you have any drop on the car, the exhaust will hit when you go over speed bumps, it's unavoidable. Why bother buying a new one and watching it get damaged when you can get one that isn't as pretty but still works the same for much cheaper?

-TC

P.S. If I receive no response over the next little while, I will go out of my way to try and pull the dent in the can and see what I can do about reshaping the tip (will require me to cut and re-weld it though... Afterwards, I'll be requesting more money for it as it'll be helping to cover my labor.

This post has been edited by razor7: Jul 26, 2010 - 7:59 PM

[razor7]

Bump.

-TC

[razor7]

TTT.

-TC

[JuMPiiN]

How much are you trying to get ? Im not really sure how much to offer honestly.

This post has been edited by JuMPiiN: Jul 31, 2010 - 10:00 PM

[Spider77]

----

This post has been edited by Spider77: Aug 1, 2010 - 7:04 AM

[razor7]

How much are you trying to get ? Im not really sure how much to offer honestly.

Shipping will be between 30-50, I'll wager high and refund the difference (ie. pay for $50, costs $35, buyer gets $15 back).

So come up with a number you feel is fair, tack on the money for shipping, and send the offer my way.

Due to current condition, I don't want some ridiculous amount of money for it, just whatever seems reasonable.

-TC

[razor7]

I'll set the price at $100+shipping (~$130 total).

Again, it's fully functional and there are no noticeable blems once it's mounted.

-TC

[razor7]

Bumpskies.

-TC