trunk release, releases, but doesnt pop |
trunk release, releases, but doesnt pop |
Nov 2, 2007 - 1:20 AM |
|
Enthusiast Joined Jan 19, '07 From Indianapolis Currently Offline Reputation: 0 (0%) |
well back on topic, I have the same problem with my 94 coupe. I have the stock spoiler, so it isn't the TRD/weight issue. It's gotta be a typical problem with age. I figure maybe the cable loosens up over time. I might try and tighten mine while I am doing some dash work this weekend. I'l let ya know.
|
Nov 7, 2007 - 5:36 PM |
|
Enthusiast Joined May 5, '05 From New-Brunswick Canada Currently Offline Reputation: 3 (100%) |
I have the opposite of that problem. When I pull on the lever it sounds like a gun shot
what about those rubber pads on each side of the lid. those might be adjustable. -------------------- ----------------------6GC's FIRST V6----------------------
JDM 96 MR2-T Faster - 94 Celica GT 3MZFE Funner - 99 Rav 4 AWD Handy |
Nov 15, 2007 - 8:14 PM |
|
Enthusiast Joined Oct 25, '07 From los angeles Currently Offline Reputation: 0 (0%) |
i had the same problem on my car...it would unlatch but not pop. My problem was that the trim on the back was loose and would pinch the latch so it would stay closed. hope that helps.
|
Nov 17, 2007 - 10:09 AM |
|
Enthusiast Joined Nov 14, '07 From Jersey, TR Currently Offline Reputation: 0 (0%) |
It would be easy to have 2 have 2 people working on it. Have one hold the release and one trying to pop it.
-------------------- One BAD ASS CAR!!!
|
Nov 17, 2007 - 2:12 PM |
|
Enthusiast Joined May 15, '05 From Toronto Currently Offline Reputation: 4 (100%) |
^^^ thats the thing, alot of the time i have stuff i need to put in the trunk and its just me. Im gonna try fiddeling around with it a bit more to see if i can get it to pop.
|
Nov 17, 2007 - 10:31 PM |
|
Enthusiast Joined Mar 13, '07 From Gold Coast, QLD, Australia Currently Offline Reputation: 0 (0%) |
I just had a play with the latch this morning. There doesn't seem to be much play in it for vertical adjustment but I pushed it as low as it would go and tightened back up so it seems to be working properly now. Only time will tell if it continues though...
FOLLOW UP: OK it's a few days later and the hatch is not releasing again. It pops but doesn't move up out of the latch far enough. I'm wondering if, since it worked momentarily, it's actually due to something being worn. Will inspect for worn parts in the latch next time I'm working on her... This post has been edited by Mangozac: Nov 25, 2007 - 12:09 AM |
Lo-Fi Version | Time is now: December 1st, 2024 - 2:46 PM |