FS:GT4 hood rain deflector, COMPLETED Thanks guys :) Options

[97lestyousay]

Prices and ship dates are as follows

1: unanodized, unengraved available 1-20-11 $75 USD shipped CONUS, $90 USD shipped INT

2: unanodized , engraved available 2-10-11 $90 USD shipped CONUS, $105 USD shipped INT

3: anodized engraved or unengraved 2-20-11 Add $10.00



Engraved, with new slots


TTE not available. WRC available. One off customs available for additional charge.
Old style


This post has been edited by 97lestyousay: Mar 22, 2011 - 8:42 PM

[block]

when are payments due? and we can't get the older style TRD with the cut-through?

[97lestyousay]

when are payments due? and we can't get the older style TRD with the cut-through?

The older style is no longer available and the TRD shown in the second photo is painted, the The D falls apart if you cut it through.

They are first come first serve, shortly before the engraving ship date, they will be engraved, blank ones may not be available after that.
The same is true with anodizing, what is not sold unanodized about a 10 days before the anodized ship date will probably get anodized.
Anodize colors will be clear (silver), and black. Unless it is a custom order I will not expect payment until I am ready to ship. I am not
going to hold any for late payments, if you order one engraved and anodized and can't make payment, I will give you a heads up, then
it is for sale to anyone.

This post has been edited by 97lestyousay: Jan 4, 2011 - 10:00 PM

[block]

oh duh...didn't think of that. due date?

[97lestyousay]

I guess I will start a list, mine isn't inclluded in the 20, so 21 will be the last available.


1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)

[block]

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)

This post has been edited by block: Jan 4, 2011 - 10:30 PM

[lilgreenyoda]

That... is freaking sick.

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)

Hit me up on PM's for paypal info.

[97lestyousay]

Here is a installed pic, this is an clear anodized TRD, without the new slots shown in pic 1.




Another showing the new slots.


This post has been edited by 97lestyousay: Jan 5, 2011 - 9:23 AM

[purplegt4]

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)
4: purplegt4: Qty (1), Engraved (WRC), Anodized (Clear)

money ready!

[Black-ST202]

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)
4: purplegt4: Qty (1), Engraved (WRC), Anodized (Clear)
5: Black-ST202 Qty (1) Engraved ( TRD) Anodized ( Clear )

PM me paypal info pleas.

This post has been edited by Black-ST202: Jan 5, 2011 - 10:59 AM

[presure2]

diggin the new style randy!
they look great!

[mak5603]

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)
4: purplegt4: Qty (1), Engraved (WRC), Anodized (Clear)
5: Black-ST202 Qty (1) Engraved ( TRD) Anodized ( Clear )
6: mak5603: Qty (1), Engraved (TRD), Anodized (Clear)

[97lestyousay]

I forgot to say, on the WRC, it may or may not be cut thru, I will try it if someone really wants it cut thru, waterjetting is a much better
way to cut it out than milling it, milling produces side pressure that might bend it in the thinner areas or rip them out completely, I will test
it out and see how it goes. I may be able to swing a deal on 9 of these, anodized and engraved for some projectors in good condition.

This post has been edited by 97lestyousay: Jan 5, 2011 - 7:47 PM

[njccmd2002]

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)
4: purplegt4: Qty (1), Engraved (WRC), Anodized (Clear)
5: Black-ST202 Qty (1) Engraved ( TRD) Anodized ( Clear )
6: mak5603: Qty (1), Engraved (TRD), Anodized (Clear)
7: njccmd2002: Qty (1), Engraved (TRD), Anodized (Clear)

[black13]

sweet been looking for one of these. Can you cut the "D" and maybe leave some thin lines so it doesn't fall through or would that look bad? if not do the letters come already painted black then or do we gotta do that?

regardless put me down for one.
1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)
4: purplegt4: Qty (1), Engraved (WRC), Anodized (Clear)
5: Black-ST202 Qty (1) Engraved ( TRD) Anodized ( Clear )
6: mak5603: Qty (1), Engraved (TRD), Anodized (Clear)
7: njccmd2002: Qty (1), Engraved (TRD), Anodized (Clear)
8: black13: Qty (1), Engraved (TRD), Anodized (Clear)

[DEATH]

Any chance for a red [not pink - I can always paint mine if need be] anodized GT4 or WRC, maybe even a TTE [I do have their MHG]? I'd prefer a cut through WRC to shout out my many WRC parts but I'm not picky.
Ever think about making a GT2 or 6GC one?
I'm a definete maybe as cash is still fcuked from Christmas and the 4 Bdays I have this month but you KNOW I wants ones! so if you end up with surplus I will eventually take one from you.
Damn Randy - why can't you make these when I actually have cash?

This post has been edited by DEATH: Jan 8, 2011 - 11:11 AM

[97lestyousay]

Any chance for a red [not pink - I can always paint mine if need be] anodized GT4 or WRC, maybe even a TTE [I do have their MHG]? I'd prefer a cut through WRC to shout out my many WRC parts but I'm not picky.
Ever think about making a GT2 or 6GC one?
I'm a definete maybe as cash is still fcuked from Christmas and the 4 Bdays I have this month but you KNOW I wants ones! so if you end up with surplus I will eventually take one from you.
Damn Randy - why can't you make these when I actually have cash?

I may end up with a few to play around with in the end, I am probabaly going to talk to Coomer about using the 6gc.net logo for a few.

[chacha]

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)
4: purplegt4: Qty (1), Engraved (WRC), Anodized (Clear)
5: Black-ST202 Qty (1) Engraved ( TRD) Anodized ( Clear )
6: mak5603: Qty (1), Engraved (TRD), Anodized (Clear)
7: njccmd2002: Qty (1), Engraved (TRD), Anodized (Clear)
8: black13: Qty (1), Engraved (TRD), Anodized (Clear)
9. chacha: 1x engraved (TRD), anodized silver

[TEAMFaint]

1: 97lestyousay: Qty (1), Engraved (TRD), Anodized (Clear)
2: block: Qty (1), Engraved (TRD), Anodiized (Clear)
3: Lilgreenyoda: Qty (1), Engraved (TRD), ANodized (Clear)
4: purplegt4: Qty (1), Engraved (WRC), Anodized (Clear)
5: Black-ST202 Qty (1) Engraved ( TRD) Anodized ( Clear )
6: mak5603: Qty (1), Engraved (TRD), Anodized (Clear)
7: njccmd2002: Qty (1), Engraved (TRD), Anodized (Clear)
8: black13: Qty (1), Engraved (TRD), Anodized (Clear)
9. chacha: 1x engraved (TRD), anodized silver
10. teamfaint: Qty (1), Engraved (TRD), Anodized (Clear) Money/Paypal ready. Need shipping to Alberta, Canada.

[97lestyousay]

Things are moving along well, I will PM everyone with the pay pal info as soon as they are ready to ship.
I got the parts from the waterjet place and am starting the finish work, sometime next week I should have
everything ready for engraving.