6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> door courtesy light wont come on when doors open
post May 1, 2014 - 3:50 PM
+Quote Post
celicaluva79

Enthusiast
*
Joined Apr 6, '12
From south carolina
Currently Offline

Reputation: 2 (100%)




ok, got a weird problem. if i open my trunk or passenger door, the courtesy lights on both doors some on. But, if i open my drivers door, the drivers side courtesy light wont come on. any suggestions? just installed leds in there and want it to work correctly.

also, when taking out my seats i found a connector under my seats with a wire plugged up into it. what is that for? many thanks
post May 1, 2014 - 3:58 PM
+Quote Post
The_enD



Enthusiast
****
Joined Apr 12, '13
From Bulgaria
Currently Offline

Reputation: 53 (100%)




Flip the LED, it's polarity matters.

Was the wire plugged into the seat?

Oops, you mentioned it works if you open the passenger door...
Does it indicate on the dash that a door is opened?


--------------------
FS thread : Custom Celica parts made to order + more

Click the image to visit my FB page





post May 1, 2014 - 5:31 PM
+Quote Post
smkr3w



Enthusiast
****
Joined Nov 29, '10
From Lake Havasu City, AZ
Currently Offline

Reputation: 31 (100%)




QUOTE (The_enD @ May 1, 2014 - 1:58 PM) *
Does it indicate on the dash that a door is opened?

If it doesn't show your driver side door open when it is its the door ajar sensor..

If it does, your led probably needs to be flipped.


--------------------

6gcHeroes:808hectortimmybatmandiegotigamak
post May 1, 2014 - 11:16 PM
+Quote Post
celicaluva79

Enthusiast
*
Joined Apr 6, '12
From south carolina
Currently Offline

Reputation: 2 (100%)




thanks for the replys. i checked the polarity, and i have them installed correctly, having installed leds before. hoping its the door ajar sensor and an easy fix.
post May 1, 2014 - 11:31 PM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




Odds are it's the switch in the door jamb that needs replaced. All it is, is a momentary on/off switch.

The wiring that goes to the seat is for the seat-belt.

This post has been edited by Box: May 1, 2014 - 11:33 PM


--------------------
2001 Miata LS 5-speed
post May 1, 2014 - 11:35 PM
+Quote Post
celicaluva79

Enthusiast
*
Joined Apr 6, '12
From south carolina
Currently Offline

Reputation: 2 (100%)




im not the most mechanical guy around, is replacing that switch in the door a bastard? or is it pretty simple? thanks
post May 1, 2014 - 11:40 PM
+Quote Post
celicaluva79

Enthusiast
*
Joined Apr 6, '12
From south carolina
Currently Offline

Reputation: 2 (100%)




yea, just tested it, its the little rubber knob that gets pushed in on the door. it works, but hardly. any idea on where to find one?
post May 2, 2014 - 12:44 AM
+Quote Post
Box



Enthusiast
*****
Joined Feb 23, '12
From Warrior, AL
Currently Offline

Reputation: 0 (0%)




If it's still working try pushing it in repeatedly a few times to see if it'll un-stick. Probably a junk yard will be your only source for an exact replacement.


--------------------
2001 Miata LS 5-speed
post May 2, 2014 - 4:38 PM
+Quote Post
travisxcore

Enthusiast
***
Joined Mar 24, '11
From 704
Currently Offline

Reputation: 3 (100%)




Most Toyotas use the same sized one. I got mine off of a Rav4 we have laying around for junk. All the switch does is ground the wire so it knows when its opened or closed.
post May 3, 2014 - 5:48 PM
+Quote Post
smkr3w



Enthusiast
****
Joined Nov 29, '10
From Lake Havasu City, AZ
Currently Offline

Reputation: 31 (100%)




http://www.ebay.com/itm/1999-Toyota-Celica...4d0&vxp=mtr


--------------------

6gcHeroes:808hectortimmybatmandiegotigamak

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 22nd, 2024 - 5:56 PM