WTB: Dash pieces/vents/ashtrays

Welcome Guest ( Log In | Register )

6G Celicas Forums > 6th Generation Celica > Buying/Selling

WTB: Dash pieces/vents/ashtrays, Immediately!

Mar 19, 2004 - 3:23 PM
Hym3n View Member Profile Enthusiast Joined Sep 5, '03 From Grapevine, TX Currently Offline Reputation: 0 (0%)	--FOUND WHAT I WAS LOOKING FOR. Thanks for stopping by!-- This post has been edited by Hym3n: Mar 19, 2004 - 8:12 PM

Mar 19, 2004 - 3:58 PM

WBW_031

Enthusiast

Joined Jan 21, '04
From Belfry, Kentucky
Currently Offline

Reputation: 0 (0%)

QUOTE (Hym3n @ Mar 19, 2004 - 8:23 PM)

Alright. Below is a link to a .zip file (416k) containing six pictures of the pieces I'm looking for. As you can obviously tell from the pictures, it was a failed painting experiment, and instead of sanding down/repainting, I'd like to just have two sets of everything that I painted. If you know for a fact that you DO NOT have any of these parts, please do not download this file--it's being hosted on my personal website, the bandwidth is low as-is, and I really don't want to have to find an alternative source of hosting.

Here is a brief description of the seven parts I'm looking for:

-Center dash bezel (containing center air vents and clock face, do not need the clock itself, but will purchase if necessary)
-Drivers side main air vent
-Drivers side upper air vent
-Passenger side upper air vent
-Front ashtray
-Rear ashtray
-Cigarette lighter (not pictured)

Please don't flame me, I know it was really really stupid to spray the vents, I learned my lesson and now I need parts. Willing to pay ANY reasonable price, and would prefer very fast shipping. To calculate shipping totals (if necessary), my ZIP code is 76051.

LINK TO IMAGES: http://www.makyostar.com/dash_panels.zip

Thanks,
-Brian

Why do you need new ones?Just sand them down and re paint them

Mar 19, 2004 - 4:46 PM
LatinKraze View Member Profile Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%)	Your best bet for those parts is eBay bro.

Mar 19, 2004 - 8:12 PM
Hym3n View Member Profile Enthusiast Joined Sep 5, '03 From Grapevine, TX Currently Offline Reputation: 0 (0%)	First off: W0000000000000000T!!! Called 28 different salvage yards or places with salvage in the title. Got replies ranging from "This number has been disconnected" to "Domestics only. Damn ricer punks" and "Engines only", so I was starting to give up. Found a place that said he had a (1) 6GC on the lot, and started to drive out there. On the same street were two other junkyards, one that had a sign up 'Toyota Heaven'. I go in, and to my surprise find 8-9 6GC's, bazillions of 5GC's and many other cool Toyota's (MR2's, old Supra's..). Found about 5 sets of everything that I was looking for, picked the best of the best, walked out for $70. Still need the cigarette lighter, but I'll pick that up from the dealer. Ahhh, so happy =D WBW_03, the vents are sprayed. You cannot 'sand down' the vents. It isn't going to happen. Plus, with as many layers of clear coat as I used, your arm will break off before you get all of the paint off of everything. If you look at the center console piece at the lower left corner, I sanded for about 2 hours and came up with those shtty results. Gave up. But hey, new parts are on and they look sharp! LatinKraze, yeah, been looking for a while, there's a place that sells a lot of 5GC-related stuff, but nothing on ours. It's all good now though =D -Brian

Mar 19, 2004 - 8:16 PM
LatinKraze View Member Profile Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%)	Dammit!!! My junk yards here in vegas dont have any 6gc's.

Mar 19, 2004 - 8:32 PM

WBW_031

Enthusiast

Joined Jan 21, '04
From Belfry, Kentucky
Currently Offline

Reputation: 0 (0%)

QUOTE (Hym3n @ Mar 20, 2004 - 1:12 AM)

First off: W0000000000000000T!!! Called 28 different salvage yards or places with salvage in the title. Got replies ranging from "This number has been disconnected" to "Domestics only. Damn ricer punks" and "Engines only", so I was starting to give up. Found a place that said he had a (1) 6GC on the lot, and started to drive out there. On the same street were two other junkyards, one that had a sign up 'Toyota Heaven'. I go in, and to my surprise find 8-9 6GC's, bazillions of 5GC's and many other cool Toyota's (MR2's, old Supra's..). Found about 5 sets of everything that I was looking for, picked the best of the best, walked out for $70. Still need the cigarette lighter, but I'll pick that up from the dealer. Ahhh, so happy =D

WBW_03, the vents are sprayed. You cannot 'sand down' the vents. It isn't going to happen. Plus, with as many layers of clear coat as I used, your arm will break off before you get all of the paint off of everything. If you look at the center console piece at the lower left corner, I sanded for about 2 hours and came up with those shtty results. Gave up. But hey, new parts are on and they look sharp!

LatinKraze, yeah, been looking for a while, there's a place that sells a lot of 5GC-related stuff, but nothing on ours. It's all good now though =D

-Brian

I didn't use any clear coat on mine and it looks good.I have a pic of it in my profile

Mar 19, 2004 - 8:43 PM
Stipt View Member Profile Enthusiast Joined Apr 29, '03 From Davenport, IA Currently Offline Reputation: 0 (0%)	Use easy off to strip the paint off, it eats it away without harming the plastics My own lil experiment!

« Next Oldest · Buying/Selling · Next Newest »

1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)

0 Members:

Display Mode: Standard · Switch to: Linear+ · Switch to: Outline

Track this topic · Email this topic · Print this topic · Subscribe to this forum

Lo-Fi Version

Time is now: November 23rd, 2024 - 5:23 PM