Possible FS:94 GT - parted/whole/3sgte seperate, Guaging intrest |
Possible FS:94 GT - parted/whole/3sgte seperate, Guaging intrest |
Aug 11, 2004 - 12:48 AM |
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
Think I might sell the 94 project celi. Im sure most of you are familiar with the car by now.. if not check out this link or my profile.
I'm think I am going to throw in the towel on the project car.. which really sux but I can't afford to finish it right now with recent developments In my life. So my loss could be your potential gain. I would like to sell the custom kit by itself, It is currently about 90% done with basic grafting etc. I can sell as is or finish it and sell for higher price. I would like to at least get 800$ for the kit as I have well over 2.5k invested in it. (this includes fenders as you will need them to fit this kit) The kit would need the GT4 hood for the full effect of it but could easily be converted back to fit the USDM hood, which I could do prior to sellin as long as I had a deposit received on the kit. I would also like to sell the trunk lid with grafted in spoiler.. I would take a straight up even trade for a 94-95 ( 2post spoiler) trunk lid with nice glass and seals. you can even keep the stock wing and wiper etc. I just need the metal and glass no wiring or plastic parts.. otherwise $300 for it. I have a custom hood for sale also.. its one I have posted about before.. 100$ - its gotta go I WILL NOT SELL THE GT4 hood so dont ask. or the JDM folding mirrors/tails. The car I would like to part out, basically have all parts left. there are some items I will keep in case I need em for the 99 3sgte - Originally a 205rc. I did a top end conversion on it to a 185 block and manifolds. It has a 185 wiring harness. Motor has very low miles on it. Approx under 30k but can't be 100% sure on that. I did not recieve the stock cluster with it but did have the original head/blockinspected there was hardly ne wear at all the shop guessed the motor to have between 15-20k. I put just over 12k on the motor. Mods that I would sell with the 3sgte are - Custom throttle body inlet, 3" stainless exhaust downpipe, Nology hotwires. all other mods would be taken off and returned to stock. the top end of the motor has been restored and powdercoated. badges and Upper timing belt cover are brand new. I have a JDM 3sge manual transmission I would include with it, stock clutch with that trans. I would like to get 5k for the motor - otherwise im keepin it check profile for pic of motor if there are ne items you are interested in purchasing.. and I have TONS! more please post here about them.. if I sell everything.(which I might not).. It would be on a best offer basis. Shipping extra. local pick up welcome. Thanks NEVERSTOP. PS please don't post nething not directly related to purchasing parts. -------------------- 99 project version 3.0.. hello SEMA 2010 =) |
Aug 11, 2004 - 1:52 AM |
|
Enthusiast Joined Sep 6, '03 From hudson ,iowa Currently Offline Reputation: 1 (100%) |
hey , i dont rember the hood and i might be interested , could you post a pic
|
Aug 11, 2004 - 1:55 AM |
|
Enthusiast Joined Aug 29, '02 From Franklin/Nashville, TN Currently Offline Reputation: 16 (100%) |
Hood1
Hood2 i hate imagestation...right click the link, copy shortcut, then paste in the browser... This post has been edited by Mynzeyes: Aug 11, 2004 - 2:00 AM -------------------- |
Aug 11, 2004 - 1:58 AM |
|
Enthusiast Joined Nov 4, '02 From Hecho en la Republica Dominicana/Living in NJ Currently Offline Reputation: 0 (0%) |
sorry to here that neverstop... hope you don't sell it and things turn out better for you reall soon... so you can finsh your car...
but if you don't... i'll take your carpet if you still have it.. if your parting it out... -------------------- |
Aug 11, 2004 - 6:23 AM |
|
Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
Need more pics and probably an inventory. The link shows no pics.
I'm interested in the 3'' DP if it bolts up to a 2.5'' midpipe. This post has been edited by Supersprynt: Aug 11, 2004 - 11:25 AM -------------------- |
Aug 11, 2004 - 7:44 AM |
|
Enthusiast Joined Apr 12, '04 From Nj Team 6gc Currently Offline Reputation: 0 (0%) |
what kinda rear bumper do you have? is it in good condition? if so, ill take it off ya hands
-------------------- Team 6gc 2oo5
|
Aug 11, 2004 - 9:11 AM |
|
Enthusiast Joined Apr 14, '03 From Long Island, N.Y. Currently Offline Reputation: 1 (100%) |
good luck with everything neverstop. it hurts to see you stop the project.
|
Aug 11, 2004 - 10:22 AM |
|
Enthusiast Joined Dec 16, '02 From Cincinnati, Ohio Currently Offline Reputation: 0 (0%) |
what exactly did you do to the 3sgte? Did you combine the st205 and 185 together? Does it run? Whats left of the engine to make it work/ install?
|
Aug 11, 2004 - 10:34 AM |
|
Enthusiast Joined Jun 30, '03 From O-town, FL Currently Offline Reputation: 0 (0%) |
I'm looking for a keyless entry system or a radar detector. Anything?
-------------------- |
Aug 11, 2004 - 10:43 AM |
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
Sorry to hear that you can't finish the project.
I'm interested in the rear disk brake setup and the trim panel that surrounds the shifter, and the climate controls...can you give me a price for that stuff? -------------------- New Toyota project coming soon...
|
Aug 11, 2004 - 1:04 PM |
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
macavely - think I still got it.. will check for you this weekend
Super - an inventory is a good idea.. gotta clean out the garage newayz this weekend so I will start on one.. as for the DP its supposed to be a direct replacement for the sw20 (mr2) believe It would bolt right up but can't be for sure droptopGT - I have a stock 94 liftback rear which I diffently wanna get rid of and I have a invader/blitz (supra) custom rear Jeremy1210 - about the only thing left to do on it is the wiring.. was gonna have Quatar11 do it but well guess he doesnt nemore Coomer - shifter trim is off an auto.. messed up the stocker.. it can still be used fine though... pretty sure I have the climate control still. 30 bucks for both. the rear disc brake setup I'm gonna hold off on though for now.. but if I do part out the car I will give you 1st dibs on that stuff -------------------- 99 project version 3.0.. hello SEMA 2010 =) |
Aug 11, 2004 - 1:36 PM |
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
Sounds good...I just sent you an email.
-------------------- New Toyota project coming soon...
|
Aug 11, 2004 - 6:04 PM |
|
Enthusiast Joined Apr 4, '04 From New York Currently Offline Reputation: 0 (0%) |
passager fender
|
Aug 11, 2004 - 6:32 PM |
|
Moderator Joined Apr 17, '03 From Rockland NY Currently Offline Reputation: 15 (100%) |
I want the stock tweeters and the little plastic piece that holds them in.
I'll also take ur shifter cables too prices ??? and paypal addy ? Let me know if you have them... DEF This post has been edited by defgeph: Aug 11, 2004 - 7:11 PM -------------------- I will return one day. |
Aug 11, 2004 - 6:54 PM |
|
Enthusiast Joined Jul 10, '03 From Appleton,WI Currently Offline Reputation: 0 (0%) |
Are you selling the GTS rims? If you are, I'm interested.
-------------------- A Jaws4God Creation... |
Aug 11, 2004 - 8:00 PM |
|
Enthusiast Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) |
I thought the MR2 DP was slightly shorter than the Celica?
-------------------- |
Aug 11, 2004 - 9:14 PM |
|
Enthusiast Joined Feb 13, '03 From California Currently Offline Reputation: 2 (100%) |
hey never first id like to add that i hate you for doing this but i know whats it like when it gets tough and the car has to wait...soo sorry you have to give this up
secondly are you parting out any interior pieces -------------------- 2011 Spice Orange Mini Cooper
2011 Alpine White BMW E92 M3 gone but not forgotten 2008 Space Grey BMW Z4 ///M 2009 Black Honda Civic LX Coupe 2006 Magnetic Black Nissan 350Z 2007 Crimson Red BMW 335i Coupe |
Aug 11, 2004 - 9:18 PM |
|
||
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
I think he is. I'm already getting a couple of them if everything goes through. -------------------- New Toyota project coming soon...
|
||
Aug 11, 2004 - 9:22 PM |
|
Enthusiast Joined Feb 13, '03 From California Currently Offline Reputation: 2 (100%) |
in that case ill take
trd shifter e-brake door sills gauges? what kind? hmm what else you...id like to help out the cause...pm never thanks -------------------- 2011 Spice Orange Mini Cooper
2011 Alpine White BMW E92 M3 gone but not forgotten 2008 Space Grey BMW Z4 ///M 2009 Black Honda Civic LX Coupe 2006 Magnetic Black Nissan 350Z 2007 Crimson Red BMW 335i Coupe |
Aug 11, 2004 - 11:07 PM |
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
gtcelica94 - not sure if I still have the original one or not.. the ones currently on the car are cut to fit the front bumper
defgeph - cool on the tweaters/plastic make offer. shifter cables im keeping right now incase I swap the 99 to manual vangSTa_celica - sold em last sunday to akimbo - sorry Supersprynt - not sure to be honest... DP is new addition to the motor.. havent had it in since I got it fastgt - which interior pieces are you interested in? ebrake and door sills I can do.. actually just got a set of em.. havent even opend the package yet -------------------- 99 project version 3.0.. hello SEMA 2010 =) |
Lo-Fi Version | Time is now: November 29th, 2024 - 10:42 AM |