coilovers, is this crap? |
coilovers, is this crap? |
Sep 20, 2004 - 4:49 PM |
|
Enthusiast Joined Nov 17, '02 From Mission Viejo, CA Currently Offline Reputation: 0 (0%) |
i saw these on e-bay....
http://cgi.ebay.com/ebaymotors/ws/eBayISAP...sspagename=WDVW for 25 bucks and 38 bucks shipping. i need to know why these are so cheap. are they ****ty or what? |
Sep 20, 2004 - 4:55 PM |
|
Enthusiast Joined Oct 22, '03 Currently Offline Reputation: 0 (0%) |
Never heard of them. Their feed back is private but they have had 46 negative feed backs this month and 982 positives.
Remember: You get what you pay for. This post has been edited by LatinKraze: Sep 20, 2004 - 4:56 PM |
Sep 20, 2004 - 5:45 PM |
|
Enthusiast Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) |
there junk .. get somthing, you dont wanna be riding on junk...
|
Sep 21, 2004 - 1:12 AM |
|
Enthusiast Joined Nov 17, '02 From Mission Viejo, CA Currently Offline Reputation: 0 (0%) |
yea f that. im just gonna get tein springs. it comes out to around 300 for coilovers due to the fact of having to get caster camber kits and get an alignment done. I dont wanna rediculously bad camber like that piece of **** rice i see everywhere. while ill still prolly need to get an alignment done itll just come out to be less anyway.
|
Sep 21, 2004 - 8:18 AM |
|
Enthusiast Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) |
dont forget about struts.. I knoew I got both my springs and struts for 400 bucks.. I have kyb- gr2's, and sportlines.. well worth the money..
|
Sep 21, 2004 - 7:20 PM |
|
Enthusiast Joined Nov 17, '02 From Mission Viejo, CA Currently Offline Reputation: 0 (0%) |
oh yea i already have KYB GR-2's. I took that into consideration.
|
Sep 21, 2004 - 8:50 PM |
|
Enthusiast Joined May 3, '04 From Alhambra 62001 Currently Offline Reputation: 0 (0%) |
Wow, thoes are the same ones I put on my Dodge neon, after 1000 miles and a 2inch drop I blew all my struts (kyb GR-2). It turns out the spring is crap! it cant keep the car stable!
Also the threaded part is made of aluminume (my spelling sucks) and is held on by 3 hex head screws (its late and I cant remember the name) and they all stripped out when I tighted them down. The front will not hold and you will do what I did after 500 miles........40 miles from my house in downtown St. Louis the screws came out (becouse they could not hold) and I blew my 1st set of front struts! I had to drive all the way home 40miles with no front struts or springs what a rollercoster! Then had to buy a new set of struts and rethread the damn holes only for them to blow all 4 500 miles later!!! They are cheap, and like you've been told...You get what you pay for! J- |
Sep 22, 2004 - 1:15 AM |
|
Enthusiast Joined Nov 17, '02 From Mission Viejo, CA Currently Offline Reputation: 0 (0%) |
holy crap. that sucks! bummer dude. well about the springs. what are your guyses opinions on teins?
|
Sep 22, 2004 - 6:01 AM |
|
Enthusiast Joined Oct 3, '02 From Va Team 6gc Currently Offline Reputation: 1 (100%) |
i recommend either the tiens or the tenabe's.
-------------------- All I have in this world is my Balls and my Word and I'm not breaking em for no one,- Tony Montana Team 6gc 2005 |
Sep 22, 2004 - 6:46 PM |
|
Enthusiast Joined Sep 14, '04 From SaN DiegO, CaLi Currently Offline Reputation: 1 (100%) |
i got ground control coils with eibach springs...there so easy to adjust...they've been holding up well but i think the coil sleeves dont sit properly on the strut assebly cause i hear the spring clinking or something when i turn slowly...i need to get new shocks too so i dunno if that has anything to do with it...always go brand name...if not you;ll be spending a grip later on repairs...
|
Sep 24, 2004 - 2:44 PM |
|
Enthusiast Joined Oct 3, '02 From Va Team 6gc Currently Offline Reputation: 1 (100%) |
evilspeed.com sells the bearings needed to get rid of that poping noise its from your springs binding.
-------------------- All I have in this world is my Balls and my Word and I'm not breaking em for no one,- Tony Montana Team 6gc 2005 |
Sep 25, 2004 - 6:56 PM |
|
Enthusiast Joined Sep 14, '04 From SaN DiegO, CaLi Currently Offline Reputation: 1 (100%) |
would it also have to do anything with the o-rings between the coils and the shocks? cause when i replaced my shocks i also put new o-rings in between and the popping noise stopped for awhile...
|
Lo-Fi Version | Time is now: November 24th, 2024 - 4:32 AM |