changing interior light color, what do you think? |
changing interior light color, what do you think? |
Oct 8, 2004 - 6:32 AM |
|
Enthusiast Joined Oct 24, '03 From Cyprus Currently Offline Reputation: 0 (0%) |
Hi,
I have seen this leds sold by speedhut that you can change the panel and dash color. see this quite a chiep mod but if this works it would be what i want. I really dont like the green (stock) and i got speedhut gauges custom in green for this reason. i would really like to change everything to blue. |
Oct 8, 2004 - 6:45 AM |
|
Enthusiast Joined Dec 24, '02 From Wirral, UK Currently Offline Reputation: 0 (0%) |
i used leds from autolumination.com.. far cheaper.. also try ultrabrightleds.com..
all the interior lighting (dash, console, hazard lights etc) in my GT is now blue with the air flow indicators now lit with red led's.. |
Oct 8, 2004 - 7:52 AM |
|
Enthusiast Joined Oct 24, '03 From Cyprus Currently Offline Reputation: 0 (0%) |
Is it easy to do? any pics? the speedometer lights change too, correct?
This post has been edited by neoklis: Oct 8, 2004 - 7:53 AM |
Oct 8, 2004 - 8:37 AM |
|
Enthusiast Joined Mar 23, '03 From New Orleans Currently Offline Reputation: 5 (100%) |
How To: Change your speedometer lights. Extremely easy and doesnt take too much time. The longest time is your time taking the speedometer out.
|
Oct 8, 2004 - 9:22 AM |
|
Enthusiast Joined Dec 24, '02 From Wirral, UK Currently Offline Reputation: 0 (0%) |
I changed the 3 bulbs in the speedo for 2 people at the UK show this summer - took me about 20 mins per car. The longest bit is checking you get the bulbs the right way around (so they are properly polarised) and they light up.
The smaller ones in the climate control are a sod to do and you need to take it to pieces to do - bank on about 3hrs for that bitch of a job ! the hazard light switch on the drivers side vent is a piece of piss. This post has been edited by BenMMellor: Oct 8, 2004 - 9:23 AM |
Oct 9, 2004 - 5:28 AM |
|
Enthusiast Joined Mar 30, '03 From Cyprus Currently Offline Reputation: 0 (0%) |
Neoklis Few members of our club made this kind of change,when we meet again remind me to ask from them to show us how it looks like(but it has to be at night)
|
Oct 24, 2004 - 12:27 PM |
|
Enthusiast Joined Mar 9, '03 From Orting, WA Currently Offline Reputation: 0 (0%) |
Mine are all Blue to include climate control
|
Oct 25, 2004 - 9:02 AM |
|
Enthusiast Joined Oct 24, '03 From Cyprus Currently Offline Reputation: 0 (0%) |
ok. good to know. I need to change that piece of crap gauges i got from speedhut anyway so prolly everything will be blue in the future.
|
Oct 31, 2004 - 8:16 PM |
|
Enthusiast Joined Feb 15, '04 From saskatoon, sk Currently Offline Reputation: 0 (0%) |
is there any way to change the color of the clock? all of my interior bulbs are red, excpet my clock.im sure ive seen someone here that has changed the colour, but
i dont want to start messing with it only to break it |
Nov 2, 2004 - 3:35 PM |
|
||
Enthusiast Joined Dec 24, '02 From Wirral, UK Currently Offline Reputation: 0 (0%) |
really easy to do this but not that easy to geta colour you want. you need to get some stage lighting gels or film.. basically you take the clock out of the dash (having to remove the entire centre section int the process) using small screwdrivers, take the clock to pieces. There is a yellowy/orange lense over the actual numbers display. Remove this. Cut a piece of couloured 'gel' to fit and super glue it on. Put the power back to it and check if you like the colour.. a lot of us in the uk have done this with a blue film.. looks |
||
Nov 3, 2004 - 11:24 PM |
|
Enthusiast Joined Jan 14, '04 From Kentucky Currently Offline Reputation: 0 (0%) |
I have a question concering the interior lights. The ones on the doors are red. Does anybody know where to get new lens covers for those to change the colors of them?? Just wondering. Thanks!
|
Nov 4, 2004 - 12:12 AM |
|
Enthusiast Joined Oct 4, '04 Currently Offline Reputation: 0 (0%) |
I'd like to know if anyone has tried this with UV lights... I was thinking it might look pretty sick. I just ordered a few UV's that I'm going to try out. Wasn't that expensive so I won't be too disappointed if it turns out bad.
|
Nov 4, 2004 - 12:23 AM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
I changed to light of my clock today. I took it apart and sprayed the digital face with transparent blue paint. I also took the amber plastic lense off and replaced it with a clear one. I tried to use blue lenses for everything but they were too blury. Painting and using a clear lense was the way to go for me
This post has been edited by Batman722: Nov 4, 2004 - 12:23 AM -------------------- |
Nov 4, 2004 - 9:02 AM |
|
||
Enthusiast Joined Dec 27, '02 From Sleep in Warren chill in clinton twp, works/school in detroit Currently Offline Reputation: 1 (100%) |
where did you get the clear lenses ? -------------------- |
||
Nov 4, 2004 - 10:24 AM |
|
Enthusiast Joined Oct 24, '03 From Cyprus Currently Offline Reputation: 0 (0%) |
For some of us that are a bit lazy, wouldn't painting the face of the clock with a blue marker have just about the same effect?
I have taken the panel out more times than i can count and i know how many things need to be taken out just to get the clock out. |
Nov 4, 2004 - 10:30 AM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
the clear lense was a just a piece of plastic from a set of markers I bought. Any thin clear plastic that is on anything you buy from a store (like a bottle of soda). I didn't use a soda bottle but I am just giving an example of what kind of plastic to use. Thin and clear. I just cut it and hot glued it in place.
-------------------- |
Lo-Fi Version | Time is now: November 30th, 2024 - 12:15 AM |