![]() |
![]() ![]() |
![]() |
![]() |
|
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
I'm hoping to paint my brother's '88 Celica over winter break, but the problem is that my garage that I'd paint the car in is very cold. It's not insulated and is composed of concrete walls and a concrete floor with a wooden framed roof. For the most part, the garage is enclosed, although the garage door doesn't seal completely near the top. And the garage is a two-car garage, shown below.
Basically, I'm trying to find a good, efficient way to heat the garage for a day so that I can spray the car. It needs to be fairly inexpensive too, because I'm broke. ![]() Anyone have any ideas?
Attached image(s)
![]() -------------------- New Toyota project coming soon...
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Jul 12, '03 From Chatham, Ont Currently Offline Reputation: 0 (0%) ![]() |
I would say a space heater but that might cost alot of money. The other option is to find a wood burning heater, my buddies dads shop has one, Im sure you could find a used one for cheap. Though installation and all that might not be worth it just to paint a car.
PS what color?? ![]() This post has been edited by Uppitycracker: Dec 7, 2004 - 7:46 PM |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 18, '04 From Portland OR / Vancouver WA Currently Offline Reputation: 0 (0%) ![]() |
Pack ur garage full of a bunch of hairy marys & have a wrestling match
-------------------- ![]() |
![]() |
|
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
That's what my dad suggested, but it seems kind of dangerous, since there'd be an open flame and paint vapors throughout the entire garage. But there is already a chimney in the garage(top right corner of that pic.) So Installing a wood stove wouldn't be too hard. It just seems kind of dangerous to me.
![]() Edit: It's going to be painted John Deere Blitz Black, which is a satin black made for industrial use on tractors. It'll be my first time painting a car, so I figure it's a good color to learn with since it's flattish-properties will hide my mistakes that I'm bound to make. ![]() -------------------- New Toyota project coming soon...
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 4, '02 From Hecho en la Republica Dominicana/Living in NJ Currently Offline Reputation: 0 (0%) ![]() |
Heat cannon... not sure of the price.. but it looks like a cannon you place it on corner of the room and depending on the size it will warm it up any where from 10-minutes to 2hours..
-------------------- |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 3, '04 From Hollywood, MD Currently Offline Reputation: 6 (100%) ![]() |
is this the one thats already black?
you said you put a body kit on it am i right? lets see some more pics of it |
![]() |
|
Enthusiast ![]() ![]() ![]() Joined Apr 4, '04 From VA, USA Currently Offline Reputation: 0 (0%) ![]() |
Presto Heat Dish, 2 of those and ull be done
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 4, '03 From Kirkland, Washington Currently Offline Reputation: 0 (0%) ![]() |
COOMER WE HAVE A PRETTY BIG SPACE HEATER! bring the car here and we'll put up plastic and u can paint it here!
DO it DO IT -------------------- Cruisin down the street in my Infiniti...always lookin for my next trip to Sin City
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() Joined Jul 12, '03 From Chatham, Ont Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(Coomer @ Dec 7, 2004 - 5:48 PM) That's what my dad suggested, but it seems kind of dangerous, since there'd be an open flame and paint vapors throughout the entire garage. But there is already a chimney in the garage(top right corner of that pic.) So Installing a wood stove wouldn't be too hard. It just seems kind of dangerous to me. ![]() Edit: It's going to be painted John Deere Blitz Black, which is a satin black made for industrial use on tractors. It'll be my first time painting a car, so I figure it's a good color to learn with since it's flattish-properties will hide my mistakes that I'm bound to make. ![]() [right][snapback]218272[/snapback][/right] Ya that does seem like a potential problem, maybe look into volatility of paint vapour and see what adequate ventilation would do to prevent any kind of ignition of the vapours. And already have a chimney would make that even easier. Maybe theres a way to have the actual opening on the outside of the garage, but I suppose that wouldn't be very efficient. And ya I always paint stuff in flat black, even flawed surfaces look good when painted flat. This post has been edited by Uppitycracker: Dec 7, 2004 - 11:09 PM |
![]() |
|
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
QUOTE(BlackCelicaGT94 @ Dec 7, 2004 - 7:52 PM) COOMER WE HAVE A PRETTY BIG SPACE HEATER! bring the car here and we'll put up plastic and u can paint it here! DO it DO IT [right][snapback]218347[/snapback][/right] I might just have to do that. ![]() -------------------- New Toyota project coming soon...
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Mar 4, '03 From Kirkland, Washington Currently Offline Reputation: 0 (0%) ![]() |
yes we do but sorry looks liek our garage is now full for a while!
-------------------- Cruisin down the street in my Infiniti...always lookin for my next trip to Sin City
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) ![]() |
My bros and I put together this contraption with a couple pieces of 2x4's and we tied up a bunch of lights to it. Big high wattage bulbs. Then we positioned it and the lights however we needed and painted away. Made for some pretty good results... ;]
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
![]() |
|
![]() Administrator ![]() ![]() ![]() ![]() ![]() Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) ![]() |
QUOTE(Kwanza26 @ Dec 7, 2004 - 9:20 PM) My bros and I put together this contraption with a couple pieces of 2x4's and we tied up a bunch of lights to it. Big high wattage bulbs. Then we positioned it and the lights however we needed and painted away. Made for some pretty good results... ;] [right][snapback]218421[/snapback][/right] I think I may do that just to provide a ton of light to the garage, because the more light the better, especially when painting a car. ![]() Did it heat the entire garage, or just the area where you were working? -------------------- New Toyota project coming soon...
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(Coomer @ Dec 8, 2004 - 5:41 AM) QUOTE(Kwanza26 @ Dec 7, 2004 - 9:20 PM) My bros and I put together this contraption with a couple pieces of 2x4's and we tied up a bunch of lights to it. Big high wattage bulbs. Then we positioned it and the lights however we needed and painted away. Made for some pretty good results... ;] [right][snapback]218421[/snapback][/right] I think I may do that just to provide a ton of light to the garage, because the more light the better, especially when painting a car. ![]() Did it heat the entire garage, or just the area where you were working? [right][snapback]218431[/snapback][/right] Well... our garage is sorta huge... ;] We just heated specific surface spots that we wanted cooked up a bit... I guess it's pretty damp in WA so you would need a heater or something else if you wanna heat the whole garage to prevent mishaps and such. Aside from that... it worked well with general lighting and heat. -------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%) ![]() |
I would say a wood stove would be the best and sfist way , an def if you already have a fire-place. or pipeing to set up.
|
![]() |
|
![]() Moderator ![]() ![]() ![]() ![]() ![]() Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) ![]() |
i used a kerosene heater when i did my swap...prolly not the safest thing around paint, tho..hehe
![]() -------------------- Former Team 5SFTE pro member ;)
![]() 13.6@108MPH, 5SFTE Powered |
![]() |
|
Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 16, '03 From Bay area Currently Offline Reputation: 0 (0%) ![]() |
can you rent a space heater?
|
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Oct 3, '02 From Va Team 6gc Currently Offline Reputation: 1 (100%) ![]() |
QUOTE(Pali_playa @ Dec 7, 2004 - 10:12 PM) Presto Heat Dish, 2 of those and ull be done [right][snapback]218337[/snapback][/right] definitly, u can get them anywere i saw them on sale at costco i walked passed the demo and i thought i was infront of a fire. hek one of those and like 30 minutes would be fine. -------------------- ![]() All I have in this world is my Balls and my Word and I'm not breaking em for no one,- Tony Montana Team 6gc 2005 |
![]() ![]() |
Lo-Fi Version | Time is now: February 23rd, 2025 - 4:18 AM |