6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> alarm wire question, mainly about the doors
post Jun 1, 2005 - 4:34 PM
+Quote Post
Terzin1



Enthusiast
***
Joined Feb 19, '05
From Indianapolis
Currently Offline

Reputation: 0 (0%)




first off, i need to know whether my celica, which has power locks, runs off negative switching door pin switches or postive 12 volt door pin switches. also, there is a wire that hooks to the brain of my alarm to detect if someone gets in the car through my trunk, does anyone know what wire to splice that into? my alarm system is a crimeguard 745i


--------------------
For the best designs and screen printing.
WE DON'T PRINT UGLY.
www.TERZink.com
post Jun 1, 2005 - 4:37 PM
+Quote Post
Terzin1



Enthusiast
***
Joined Feb 19, '05
From Indianapolis
Currently Offline

Reputation: 0 (0%)




i read coomers guide but still cant find the door trigger wire in the kick panel, there are a ton of red/white wires under there.


--------------------
For the best designs and screen printing.
WE DON'T PRINT UGLY.
www.TERZink.com
post Jun 1, 2005 - 4:42 PM
+Quote Post
DmVinny

Enthusiast
***
Joined Feb 23, '03
From Florida
Currently Offline

Reputation: 0 (0%)




Actually Pali_playa's alarm thread is better but;

Power Lock is Blue/Black and its negative located under the steering column its a small black box.

Power Unlock is Blue/Green and is Negative as well.

And the turnk pin which is negative is on the drivers side kick panel and is Red/Green


post Jun 1, 2005 - 5:06 PM
+Quote Post
Terzin1



Enthusiast
***
Joined Feb 19, '05
From Indianapolis
Currently Offline

Reputation: 0 (0%)




that info is usefull, but i need to know about the door pin switches cause i have to either connect a positive of negative wire to the pin switch wire so my alamr knows when the doors are opened. i guess im just having trouble finding the wires i need cause there are a ton in the kick panel

This post has been edited by Terzin1: Jun 1, 2005 - 5:08 PM


--------------------
For the best designs and screen printing.
WE DON'T PRINT UGLY.
www.TERZink.com
post Jun 1, 2005 - 5:24 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




It's a negative door trigger. Test the red and white wires and find the one that gives you +12 volts with both doors closed and ground with either(or both) doors open. I may have a picture of exactly which wire you need to tap into at home.

And I'm not sure about the trunk pin. I do know that on hatchbacks it's tied into the door pin circuit, but not on coupes.


--------------------
New Toyota project coming soon...
post Jun 1, 2005 - 5:50 PM
+Quote Post
Terzin1



Enthusiast
***
Joined Feb 19, '05
From Indianapolis
Currently Offline

Reputation: 0 (0%)




can you post what that picture coomer? there was obviously an alarm in my car before i bought it and the guy must have removed it because alot of the wires i am using are already cut and respliced back together, i can find any that were cut for the doors tho

This post has been edited by Terzin1: Jun 1, 2005 - 5:51 PM


--------------------
For the best designs and screen printing.
WE DON'T PRINT UGLY.
www.TERZink.com
post Jun 1, 2005 - 6:36 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




Yeah, I'll look when I get home. I'm off work in twenty minutes and then I'm probably going straight home.


--------------------
New Toyota project coming soon...
post Jun 1, 2005 - 6:40 PM
+Quote Post
Terzin1



Enthusiast
***
Joined Feb 19, '05
From Indianapolis
Currently Offline

Reputation: 0 (0%)




ok, i found a wire that goes to 12+ volts when the drivers door is closed and no reading when its opened. however, the reading is not effected when the pass. door is opened or closed. did i find the wrong wire? btw, i dont htink convertibles have the option to have the dome lights come on when the doors open like the other celicas.

damn it, why is it that the passengers side coutesy light (the red light that lights up when you open the door thats ON the door) only lights up when the drivers door is open? if i open only the passengers side door, the light doesnt go on. that must be affecting something

This post has been edited by Terzin1: Jun 1, 2005 - 6:51 PM


--------------------
For the best designs and screen printing.
WE DON'T PRINT UGLY.
www.TERZink.com
post Jun 1, 2005 - 6:56 PM
+Quote Post
Coomer



Administrator
*****
Joined Aug 23, '02
From Seattle, WA
Currently Offline

Reputation: 14 (100%)




Let me guess. The wire you found is red with a yellow stripe, right? There's one that's seperate for the driver's door(for the auto off headlights and such), and at some point it combines with the red/white wire(I think at the integration relay.)


--------------------
New Toyota project coming soon...
post Jun 1, 2005 - 7:00 PM
+Quote Post
Terzin1



Enthusiast
***
Joined Feb 19, '05
From Indianapolis
Currently Offline

Reputation: 0 (0%)




i didnt try any red and yellow wires but now i have found 3 wires that are only affected by the drivers door!!!!


--------------------
For the best designs and screen printing.
WE DON'T PRINT UGLY.
www.TERZink.com
post Jun 2, 2005 - 9:40 AM
+Quote Post
Terzin1



Enthusiast
***
Joined Feb 19, '05
From Indianapolis
Currently Offline

Reputation: 0 (0%)




i think i found the problem, the passengers side door trigger isnt working, that is the only solution. Now i need to locate where in the hell the problem is. is the door open light in the dash light up when everyone elses pass. door is open? what does it mean when the red/white wire right next to the pass. side trigger registers 12 volts no matter if the door is opened or closed?

This post has been edited by Terzin1: Jun 2, 2005 - 11:10 AM


--------------------
For the best designs and screen printing.
WE DON'T PRINT UGLY.
www.TERZink.com
post Jun 6, 2005 - 3:05 PM
+Quote Post
madmods



Enthusiast
*****
Joined Mar 19, '04
From Scottsdale, Az
Currently Offline

Reputation: 2 (100%)




Terzin, your in luck, as I am doing a alarm job on my convertible. What actual wires do you need so i can take pics?

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 28th, 2024 - 6:47 PM