is it possible? Options

[jcamp89]

i was wondering if it was possible to just make your own brackets and kind of retrofit the gt4 front bump. on a gt? wondering if anyone had done it or tried to do it on here. thanks

[celiracer]

The GT-4 bumper fits onto the GT or the ST or any 6th gen celica. Read the exterior stickies and you'll find all of your information.

[jcamp89]

hey thanks man i searched before but i didnt read all of them or even look at all of them, but i got what i needed thanks.

[ScoobyDooCruiser]

Although, if you don't replace the hood also, you will get a gap between the hood and the bumper.

[99GT]

You can just buy the hood and bumper and it'll pop on?

[Rayme]

You can just buy the hood and bumper and it'll pop on?

For the hood you'll need to modify the hood latch or buy the genuine gt-4 one.



As for the bumper, you'll need to modify the front crash bar or buy the genuine gt-4 one..



pretty simple...and if your cheap like me, you'll go the "modify" way...which by the way Im going to make a thread about how to modify the stock crash bar. Very easy to do.

[ScoobyDooCruiser]

Not to jack a thread or anything, but if anyone needs one, I've got a spare crash bar, already cut down (its a US one. Just bolts on)

[jcamp89]

thanks guys thats what i was looking for but i got to loking. is there any place besides toyotaworld i can get this stuff. something a lil cheaper?

[Batman722]

thanks guys thats what i was looking for but i got to loking. is there any place besides toyotaworld i can get this stuff. something a lil cheaper?

try your local toyota dealer

[Rayme]

thanks guys thats what i was looking for but i got to loking. is there any place besides toyotaworld i can get this stuff. something a lil cheaper?

try your local toyota dealer

toyotaworld IS the cheapest. If you want the GT-FOUR look you wont get it any cheaper than around 1200$+shipping when all said and done. Add another 200$ for the spoiler. I got good experience with them, the shipping was very descent too, I paied a lil over 200$ and I'm in New-Brunswick, Canada...if you look at the map you'll see its quite far from Texas . I know they weren't ripping me off.

Btw, at my local toyota dealer, they wanted 1300$ CANADIAN for the hood only! (no vents or grill, the single hood, 1 part out of the dozen needed to make the conversion).

Look at it this way..its around the same price as a bodykit, but it looks way better and its strong ABS plastic, and if fits 100% on the celica, no bodywork needed!

[6strngs]

I've found 1sttoyotaparts.com to be cheaper on most parts than toyotaworld. but I don't know if they can get those parts or not. they can get some JDM parts if you just type in part numbers (projectors, rear strut bar, etc) so I think they could probably the hood + bumper if you call or e-mail them. they might be slightly cheaper.

[Rayme]

I've found 1sttoyotaparts.com to be cheaper on most parts than toyotaworld. but I don't know if they can get those parts or not. they can get some JDM parts if you just type in part numbers (projectors, rear strut bar, etc) so I think they could probably the hood + bumper if you call or e-mail them. they might be slightly cheaper.

1st part toyota didnt want to ship a hood. so..theres the answer lol
but they do have good prices, I ordered small parts from them too, but toyotaworld is the place to get the hard to get ones..like the hood peices

This post has been edited by Rayme: Dec 20, 2006 - 5:06 PM