3sgte parts for a 5sfe Options

[1994toyotaracer]

hey i was just wondering what parts from a 1993 3sgte will fit on a 5sfe like camshafts, heads and stuff cuz i want to do a turbo on my 1994 5sfe but i want to build it up form bottom end to top also i would like to know what parts i need for my turbo kit and places i can get them from

thanks

[presure2]

read the stickys at the top of this forum

[1994toyotaracer]

read the stickys at the top of this forum

i know about the sticky i have read it im really just trying to find out where to get the parts on websites like the turbo oil lines and fuel injectors

[presure2]

read the stickys at the top of this forum

i know about the sticky i have read it im really just trying to find out where to get the parts on websites like the turbo oil lines and fuel injectors

well, then, you need to read them again.
these are quotes from just the FIRST post in my turbo sticky.

then, i started looking for parts:
3s exhaust manifold, ct-26 turbo, oil hard lines, elbow and primary cat (also known as a downpipe), if your not planning on getting a aftermarket downpipe. also the oil pan and 2bar map sensor.
your gonna want these off of a 2nd gen 3sgte from a 90-93 alltrac or mr2T, and are pretty easy finds over on www.alltrac.net and or www.mr2oc.com. if your not a member of these 2 sites, YOU SHOULD BE!!! theres a wealth of info on these to sites, and while alot of it may not be 5sfte spacific, its still VERY good info, especially the 90-99 mr2/ 3sgte forum.
next was injectors.
i found mine on ebay
use the 255lph walboro supra pump. you can get it for under 100 usually on ebay

the info is there.

[1994toyotaracer]

oh i must have skipped over that part thanks

[presure2]

oh i must have skipped over that part thanks

well, next time, dont just skim over the words to get to the pretty pics...actually READ it.