 Stock boost and IC routing, Doing searches is hard on the forum |
  |
 Jan 25, 2007 - 6:25 PM
|
 
|
|
Enthusiast Joined Jan 31, '06 Currently Offline Reputation: 0 (0%)  |
Ok, got my buddys 3rd gen 3sgte running good now. Its only pulling .8 bar, I havnt touched the boost controller, but I was just wondering what the stock boost is supposed to be.
and Right now the intercooler piping for the front mount is in shambles. Its all silicone bends connected together, and the routing puts it right next to the exhaust. He is going to buy new piping, and since im installing it, I need an estimate on what pipes he needs, and the best way to route the piping, preferably with pics. We need you to get this beast running good again! P.S. I gave up on my other buddys swap, he is just too cheap, this guy has money 
|
|
Jan 25, 2007 - 6:45 PM
|
|
 Enthusiast  Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
stock boost for that motor is around .8 - .9 bar (12-13psi). so it sounds like everything is running fine.
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Jan 25, 2007 - 8:10 PM
|
|
|
Enthusiast Joined Nov 20, '06 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
do show pictures of how you do this, as i am going to be doing this exact same thing very shortly. thanks
|
|
Jan 25, 2007 - 9:33 PM
|
|
 Enthusiast Joined Aug 23, '05 From Princeton, Minnesota Currently Offline Reputation: 7 (100%) |
heres a vid i found on youtube on how the piping is run
I/C piping -------------------- -Brian
 |
|
Jan 25, 2007 - 9:39 PM
|
|
|
Enthusiast Joined Jan 31, '06 Currently Offline Reputation: 0 (0%) |
THanks! Thats the routing that he needs. Any ideas on how many and what bends he is gunna need?
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 18th, 2025 - 6:41 PM |