Admin please Delete!, thank you Options

[6gcSTVT]

So I didn't know whether to put this in the buying or selling section because its more like a feeler. I have gone to a couple shops in my area and some won't do exhausts beyond the stock diameter and the closets custom shop quoted me $375 for a catback with a mangaflow muffler. I know a bunch of you have custom exhausts and idk whether you made them yourselves or not but whats a good price to pay for a cat ack and headerback? As well as would anyone want to make me one?


Prices on stainless and reg steel would be awsome.

This post has been edited by 6gcSTVT: Feb 5, 2007 - 1:18 AM

[Jaws4God]

the shop I went to did 2 1/4" crush bent with a 2 1/4" resonator and they installed my magnaflow muffler for $120..

I want to do header back soon so i'll let you know what that price is

[netrata]

The local exhaust shop priced me $135 on my 2.5" mandrel bent over-axle exhaust pipe setup, adding in my magnaflow high-flow cat. converter, magnaflow 20" resonator, and megan racing N1 style rear muffler. I say it was a good price for my setup.

This post has been edited by netrata: Feb 4, 2007 - 1:45 PM

[Bigmeanbulldog55]

The local exhaust shop priced me $135 on my 2.5" mandrel bent over-axle exhaust pipe setup, adding in my magnaflow high-flow cat. converter, magnaflow 20" resonator, and megan racing N1 style rear muffler. I say it was a good price for my setup.

Almost my set up. I got 2.25 inch from the header back with 20inch magniflow resinator, high flow cat, and megan racing muffler. I think my exhaust was crust bent, but it has smooth flow bends, not the rinkle crust bends. It was $90 for the pipe, and then $40 when I put the cat and resinator in. And it's over axle. Some places will just screw you because they can. The hell with them.

[6gcSTVT]

The local exhaust shop priced me $135 on my 2.5" mandrel bent over-axle exhaust pipe setup, adding in my magnaflow high-flow cat. converter, magnaflow 20" resonator, and megan racing N1 style rear muffler. I say it was a good price for my setup.

Almost my set up. I got 2.25 inch from the header back with 20inch magniflow resinator, high flow cat, and megan racing muffler. I think my exhaust was crust bent, but it has smooth flow bends, not the rinkle crust bends. It was $90 for the pipe, and then $40 when I put the cat and resinator in. And it's over axle. Some places will just screw you because they can. The hell with them.

So did you buy your own resonators, cat and mufflers first and then go to the shops to have them install it all for those prices?

[Bigmeanbulldog55]

I bought the muffler and cat. The resinator was included in the price, and so was the 2.25 inch mesh flex pipe.

[Jaws4God]

yep they included the Resonator and I just provided the muffler... i have stock cat still