 power windows 2 or 4 |
  |
 Apr 26, 2007 - 2:31 PM
|
 
|
|
Enthusiast  Joined Dec 8, '05 From South Bend / Mishawaka INDIANA Currently Offline Reputation: 0 (0%)  |
Hey, I have a convertable 6th gen and the driver's side back window stopped going up. Not the one in the door, the one behind the door coming off the quarter panel. I was hoping to buy the new motor and track used, but I was looking at a hatchback celi today and it looked like the back windows don't move. In peeking down at the dash, I saw the controls for the rear window were not there. Do any other 6th gen's besides the convertables have power windows in back?
|
|
Apr 26, 2007 - 5:07 PM
|
|
 Enthusiast Joined Mar 19, '07 From Washington Currently Offline Reputation: 9 (100%) |
I don't think so, just us convertible people
 ..anyhow, that happens with my car also. the thing is, i think, that when the top is up the components must get in the way of the window and it wont go up.. all you have to do tho is simply have your top down when you roll them up and they'll go up fine ( found that out the hard way after two nights of having to put a plastic bag in place of the window overnight just in case it rained  ) I'd try doing that before buying a different car.
-------------------- "A true car enthusiast can see the potential in any car"
 QUOTE (njccmd2002 @ Oct 3, 2008 - 2:01 PM)  i rather be a slow turtle in risk of extinction, than a fast locust, that you can see everywhere and need to be terminated. |
|
Apr 26, 2007 - 5:19 PM
|
|
 Enthusiast Joined Aug 17, '03 From Bloomington, Indiana Currently Offline Reputation: 62 (98%) |
Yeah.... we dont have rear windows that move at all... Doesn't really bother me though
--------------------  |
|
Apr 26, 2007 - 5:37 PM
|
|
 Enthusiast Joined Apr 11, '06 From Tasmania Currently Offline Reputation: 0 (0%) |
Would be diffrent do you think we could put them into normal 6gc's
-------------------- Ok Gladys, lets play house, you be the door and I'll shut you.
 |
|
Apr 26, 2007 - 5:39 PM
|
|
|
Enthusiast Joined Mar 19, '07 From Washington Currently Offline Reputation: 9 (100%) |
QUOTE(GreenyST204 @ Apr 26, 2007 - 10:37 PM) [snapback]551164[/snapback] Would be diffrent do you think we could put them into normal 6gc's so now convertables are not considered normal anymore?  lol..jk -------------------- "A true car enthusiast can see the potential in any car"
QUOTE (njccmd2002 @ Oct 3, 2008 - 2:01 PM) i rather be a slow turtle in risk of extinction, than a fast locust, that you can see everywhere and need to be terminated. |
|
Apr 27, 2007 - 7:31 AM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
I have a convertible too, an im havin a somewhat same problem. I guess my window isgetting of track, i hear it click, when its going up, and does not flush correctly with the door window, leaving a gap between. I wanted to see about taking it appart.
 My best guess mine could be damaged or simply dirty. After 10 years of dust, grease, grinded metal. I think its worhtwhile taking it out, clean it with gasoline, get old grease out, and regrease it. I know its a lot of work but it should definitely prolong the life of the little motor. I think these motors have a protection. If the sensors think the motor stop, or has something stopping it it wont keep feeding electricity to the motor.  The only setback of taking the window out, is you have to know how to properly adjust it after putting it back in. I am planning on taking pictures on ho the pins on the pannel are, and measure the gap between window, metal before simply going in and taking it out. Plann it carefully. I dont have time this weekend, but maybe next. I am planning on doing this on all four windows, its cheaper thant replacing all of them. Plus i will be bonding with my car!!! 
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Apr 27, 2007 - 7:34 AM
|
|
|
Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
"butterdog
'96 GT Convertible" I was looking at your car pics, did you paint that dash. Its nice.... -------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Apr 27, 2007 - 10:40 AM
|
|
 Enthusiast Joined Aug 15, '06 From MICHIGAN Currently Offline Reputation: 1 (100%) |
I have the exact same problem except that the rear passenger window will not go down or up unless you rock the switch back and forth... I dont even like to put it down because Im afraid one of these times it wont go back. I took the switch apart and sprayed some cleaner in it, but it didnt seem to help.
|
|
Apr 29, 2007 - 10:00 PM
|
|
|
Enthusiast Joined Dec 8, '05 From South Bend / Mishawaka INDIANA Currently Offline Reputation: 0 (0%) |
QUOTE(njccmd2002 @ Apr 27, 2007 - 7:34 AM) [snapback]551408[/snapback] "butterdog '96 GT Convertible" I was looking at your car pics, did you paint that dash. Its nice.... Yes I handpainted it all myself. Thanks for the appreciation! BTW thanks to everybody that helped me out with info, I am getting motors and tracks from a 6gc member and hopefully I can do all the work myself. |
|
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 9:55 AM |