7afe cluster problems |
7afe cluster problems |
Apr 30, 2007 - 7:43 AM |
|
Enthusiast Joined Jul 13, '06 From South Africa Currently Offline Reputation: 0 (0%) |
Hi guys/gals i fitted a 4age 20v motor in to a corolla which had the 7afe motor.
Now the problem is when i rev the 4age to 8000rpm , the rev needle bounces and stays at 6700rpm .. it doesnt want to move futher. How can i fix this... All help appreciated |
Apr 30, 2007 - 9:14 AM |
|
Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
does the engine get to 8000 RPM's? Are you useing the 20V ECU?
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
I'm not really an asshole, but I play one on the internet. **** Photobucket |
Apr 30, 2007 - 11:16 PM |
|
Enthusiast Joined Feb 16, '06 From Maui, Hawaii Currently Offline Reputation: 6 (100%) |
Yes, what ECU are you running and what 20v engine? Here's a link from club4ag that has a thread on "20v revcut."
http://forums.club4ag.com/zerothread?id=2552 This post has been edited by netrata: Apr 30, 2007 - 11:36 PM -------------------- |
May 3, 2007 - 1:30 AM |
|
Enthusiast Joined Jul 13, '06 From South Africa Currently Offline Reputation: 0 (0%) |
I am using the Silvertop 20v motor, and i am using a Aftermarket management...
It revs till 8000rpm , but on the cluster the needle bounces back on 6700rpm.... hope this helpsss Thank you for your help |
Lo-Fi Version | Time is now: December 5th, 2024 - 5:50 AM |