 Anyone ever install keyless entry? |
  |
 Jul 29, 2003 - 3:59 AM
|
 
|
 Enthusiast  Joined Dec 11, '02 From Sioux Falls, SD, USA Currently Offline Reputation: 0 (0%)  |
I was thinking about picking a kit up. Now, I'm decent in wiring. So if I took an hour or so out of the day, could I have the sucker installed and working? Keep in mind, I'm a moron.
|
|
Jul 29, 2003 - 12:23 PM
|
|
|
Enthusiast Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) |
You might be able to get it installed in a hour the lock wires are in the drivers kickpanel. The locks are negative trigger and lock is blue/black and unlock is blue.
Another option is doing a full alarm it's a few more wires and a little more work but you get the protection. Just an idea. |
|
Jul 29, 2003 - 7:31 PM
|
|
|
Enthusiast Joined Dec 11, '02 From Sioux Falls, SD, USA Currently Offline Reputation: 0 (0%) |
So I don't have to tear my door apart to do this? Just splice some wires? I would do an alarm, but I don't exactly live in the middle of a crime infested town, nor is my car that bling bling (nor do I have a ridiculously expensive stereo). Plus just the keyless is cheaper, and cuts the ignition wire when you lock the car.
This post has been edited by MrCodyFantastic: Jul 29, 2003 - 7:32 PM |
|
Jul 29, 2003 - 9:04 PM
|
|
 Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
Well, the first time I ever installed keyless entry was when I did it on my car last summer, and it took me around three hours or so to do the wiring and stuff. I could do it in an hour now though, now that I've installed an alarm with remote start.
-------------------- New Toyota project coming soon...
|
|
Jul 30, 2003 - 12:02 AM
|
|
 Enthusiast Joined Jul 27, '03 From Maine Currently Offline Reputation: 0 (0%) |
U all have power locks right? can u do keyless entry on a un power lock car?
|
|
Jul 30, 2003 - 8:58 AM
|
|
||
|
Enthusiast Joined Dec 19, '02 From West of Atlanta Currently Offline Reputation: 1 (100%) |
Sorry I should've asked that too. I assumed you meant you had power locks and wanted to add keyless entry. If you don't have power locks than it is gonna take more than an hour. Coomer: did you locktite all of the screws on the actuator. When I installed at the shop we had a few cars comeback because the screws worked loose. Once we started using locktite we never had a problem. |
||
|
Jul 30, 2003 - 2:51 PM
|
|
|
Enthusiast Joined Dec 11, '02 From Sioux Falls, SD, USA Currently Offline Reputation: 0 (0%) |
Nah...I already have power locks. So it's gonna be super easy?
|
|
Jul 30, 2003 - 10:41 PM
|
|
|
Enthusiast Joined Jul 27, '03 From Maine Currently Offline Reputation: 0 (0%) |
so u can do it without power locks?
|
|
Jul 30, 2003 - 10:52 PM
|
|
|
Enthusiast Joined Oct 1, '02 From Minnesota, USA Currently Offline Reputation: 0 (0%) |
Yeah, but you need to buy an actuator from a place like http://www.autoloc.com which will make them open and close on thier own.
-------------------- 95 Toyota Celica GT
Dead for now --> Soon to have a 3S-GTE 02 WRX --> This is for speed - Borla Exhaust - TurboXS BOV - Custom CAI 02 Civic EX - MB Quart Reference 5.25" Components - Rockford MTX 8" Subs in the doors - Alpine Type S Rear Fills - 2x Alpine SWR-1042D Subs in a custom fiberglass box - Alpine F345 Amp for the front doors - Alpine M605 on each Type R - Phoenix Gold wiring - Alpine CDA-9855 Head Unit - Alpine Amp link - 2x Rockford Fosgate 1 Farad Caps - The best Viper 791 alarm install ever |
|
Jul 30, 2003 - 11:12 PM
|
|
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
I did install power lock actuators when I did this. Those took me a while to do, but that was because it was back when I was dumb.
 Also, I didn't use Locktite, and once a screw was loose, so I just tightened it down, and I haven't had problems since. I probably should use some Locktite on them though. By the way, you can find the actuators for like five bucks a pop on eBay. That's what I did, and they're worked perfectly for me.
-------------------- New Toyota project coming soon...
|
|
Jul 31, 2003 - 11:56 AM
|
|
|
Enthusiast Joined Jul 27, '03 From Maine Currently Offline Reputation: 0 (0%) |
thanks
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 7:28 AM |