WTB: Oil feed line for 3sgte, I made a boo boo Options

[1bwilson]

So I let my brother cut my hard line for my 5sfte project. I pointed at exactly where I wanted him to cut it so that I would have the full length of the stock hard line before I had to weld the AN fitting. Well he cut the wrong end and not only is it on the wrong side but he cut it so far down and close to the oil return that Im 90% sure the 2 are to close to get a full weld around the line. So im in a bind, I cant continue the install without the feed line. Anyone got a spare stitting around I can buy off ya? I cant remember what I paid for the first so make your own price. Thanks.

Again WTB: Stock oil feed line from a 3sgte, the line that goes from the turbo and includes the oil return line.

This post has been edited by 1bwilson: Sep 6, 2007 - 5:51 PM

[pokemeintheeye]

Its only about $65 at the Toyota Dealer.

[1bwilson]

Awsome, I can handle that. Ill be ordering one monday unless someone pops on here with a offer. Anyone have a part # by chance?

This post has been edited by 1bwilson: Sep 6, 2007 - 8:21 PM

[1bwilson]

So its actually $168 from the dealer or so they said. Ill look around for a better price but the WTB is back up.

[x_itchy_b_x]

how about a KO racing adapter then a ebay oil line that you dont need to weld an -AN fitting to.

http://www.koracing.net/viewproduct.php?fo...amp;product=239
20 bucks for the fitting

http://cgi.ebay.com/ebaymotors/EARLS-3-AN-...sspagenameZWDVW
20 for the oil line.

This post has been edited by x_itchy_b_x: Sep 7, 2007 - 4:02 PM

[1bwilson]

That would work great if I hadnt already cut the hardline off of the banjo fitting. Unless im misteken the banjo fitting is the #2 part pf the oil feed line, first from the block, second from the turbo. The only part I was planning on using was the turbo side of the line with the return. The feed part of the line is literally cut 1 inch from where it bolts from the turbo.