 Stef's 7AFTE Tech/Project, First Dyno run pg16 |
  |
 Sep 30, 2007 - 8:29 AM
|
 
|
 Enthusiast  Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%)  |
As many of you know I'm going to turbo the 7A.
 So first things first, with the help of Garrett's Turbo Tech 103 (Expert), I did the compressor flow map calculations... try to follow along, if you have any questions just ask... here are the EQUATIONS:  and the CALCULATIONS (for a 7AFE with a target of 200hp at the flywheel):  then you need to plot some numbers on the COMPRESSOR FLOW MAP of your choice I got a small Garrett 2052 which should be enough for my goals  From just looking at different compressor flow maps you'll learn a lot. In general, the closer the turbine and exhaust housing sizes the wider your power range will be but the maximum boost level is limited. When the sizes are significantly different you'll notice the compressor map will look taller and thinner, that gives you a smaller RPM range you can boost in but you can achieve higher boost levels in that range. This post has been edited by hurley97: Jul 24, 2009 - 5:13 PM -------------------- |
|
Sep 30, 2007 - 8:53 AM
|
|
 Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
good stuff steff, keep it comin!
-------------------- Former Team 5SFTE pro member ;)
 13.6@108MPH, 5SFTE Powered |
|
Sep 30, 2007 - 11:50 AM
|
|
 Enthusiast Joined Apr 20, '06 From Florida Currently Offline Reputation: 44 (100%) |
this is going to be a good thread
|
|
Sep 30, 2007 - 5:00 PM
|
|
|
Enthusiast Joined Sep 30, '07 From Vancouver, WA Currently Offline Reputation: 0 (0%) |
Hey guys, I'm the Piloter who's doing the 7AGE build over at ToyotaNation, just thought I'd stop lurking and drop by for this thread in particular.
I've been doing some intensive modeling of the 7AFE/7AGE/7AFTE/7AGTE/7AGZE/7AFZE via Engine Analyzer Pro and trying to get a selection of compatible turbos/superchargers programmed in as options, thus I've been reading a LOT of flow maps. This was originally created for the VW guys, and I've modified it slightly to give conversion factors of airflow in pretty much every unit possible, you'll just have to modify the VE at your discretion and plug in numbers to boost RPMs and PSIs. http://rapidshare.com/files/59382057/18tCo...ctions.xls.html I have to head to work right now, but just off the top of my head the best turbos to start looking at if you want 7 PSI by 3K (what I've been simulating for) would be a GT2552R or a TD04-15. The GT2862RS ('disco potato') and T3-'Super 60' will both come up on 7 PSI by 4K, but that's with the flow figures for a bigport 16V head. Hope this helps. |
|
Oct 2, 2007 - 10:22 PM
|
|
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
I have already bought a turbo. When I get some time I'll post up the compressor map for it and explain where to plot the lines and how to tell how much boost it will make and when.
-------------------- |
|
Oct 2, 2007 - 10:26 PM
|
|
 Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
damn girl, you got more projects then the ghetto!
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Oct 2, 2007 - 10:38 PM
|
|
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
but for now I'll introduce the rest of my turbo project...
What little things I have so far: AFC Neo Fuel Controller  Oil Pressure and Boost Gauges  Manual Boost Controller  2 Bar MAP Sensor  Rebuilt 7AFE waiting to be put back together and boosted  Log Style Exhaust Manifold (I can't find the picture of it... and its at work so I can't take one) Turbo (being FedEx'd from Canada at the moment) -------------------- |
|
Oct 2, 2007 - 10:44 PM
|
|
|
Enthusiast Joined May 3, '04 From pittsburgh Currently Offline Reputation: 0 (0%) |
I have a feeling your lil ST is gonna kick some serious dyno ass
--------------------  Now SR powered |
|
Oct 3, 2007 - 5:13 AM
|
|
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
QUOTE(lagos @ Oct 2, 2007 - 11:26 PM) [snapback]600977[/snapback] damn girl, you got more projects then the ghetto! hahaha... (I know that was pointless but I just had to respond to that one) -------------------- |
|
Oct 3, 2007 - 7:15 AM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
steph do you mind if i add this to the 7afte sticky, since it is missing this data
|
|
Oct 3, 2007 - 4:27 PM
|
|
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
QUOTE(playr158 @ Oct 3, 2007 - 8:15 AM) [snapback]601078[/snapback] steph do you mind if i add this to the 7afte sticky, since it is missing this data thats fine with me Dan. Once I add more about the calculations and actual flow maps I'll see if someone can move it around so it's all together and away from all my turbo setup stuff. -------------------- |
|
Oct 3, 2007 - 5:07 PM
|
|
|
Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
thanks chica
|
|
Oct 3, 2007 - 7:16 PM
|
|
|
Enthusiast Joined Jul 10, '05 From Monroe, WA Currently Offline Reputation: 6 (100%) |
QUOTE(hurley97 @ Oct 2, 2007 - 8:38 PM) [snapback]600982[/snapback] but for now I'll introduce the rest of my turbo project... What little things I have so far: Oil Pressure and Boost Gauges heyyy! i have those same ones. color n all -------------------- 94' ST Coupe - 5sfe Motor swap and brake swap.
 |
|
Oct 3, 2007 - 7:37 PM
|
|
 Enthusiast Joined Feb 28, '07 Currently Offline Reputation: 1 (100%) |
dan are u a m0d?
-------------------- BANNED. for life, you moron.
|
|
Oct 3, 2007 - 11:13 PM
|
|
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
QUOTE(hurley97 @ Oct 3, 2007 - 5:27 PM) [snapback]601252[/snapback] QUOTE(playr158 @ Oct 3, 2007 - 8:15 AM) [snapback]601078[/snapback] steph do you mind if i add this to the 7afte sticky, since it is missing this data thats fine with me Dan. Once I add more about the calculations and actual flow maps I'll see if someone can move it around so it's all together and away from all my turbo setup stuff. i think you should have your own "stickie". you did the research and you deserve the credit. i have to confess. i see all the math and research, and then i see that pic of the neo, and its kind of a buzz kill for me..lol -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
|
Oct 4, 2007 - 10:31 AM
|
|
 Enthusiast Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
another 7afte project keep up the great work oh and dont forget to port match that helps
-------------------- yea your 3sgte is cool but ill stick to my 7agte
|
|
Oct 6, 2007 - 6:53 PM
|
|
|
Enthusiast Joined Mar 3, '04 From Portsmouth, RI Currently Offline Reputation: 33 (100%) |
my turbo is here... and its little, just like everything else in the 7A, perfect match if you ask me
I tried to give an idea of size with some of the pics but it just makes my hand look big... so keep in mind I have tiny hands...      -------------------- |
|
Oct 6, 2007 - 7:02 PM
|
|
 Enthusiast Joined Aug 30, '02 From Maryland Currently Offline Reputation: 8 (100%) |
Use a coke can next time
, big hands or little turbo, either way looking good
-------------------- Member of Team 5sfTe
|
|
Oct 6, 2007 - 10:14 PM
|
|
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
mmm yummy turbo!
-------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
|
Oct 6, 2007 - 11:17 PM
|
|
|
Enthusiast Joined Jul 3, '04 From Yakima, WA Currently Offline Reputation: 1 (100%) |
that looks similiar to my turbo hmm!
-------------------- the 1/4 doesnt have patience for a ST.... so we make them ST-T's so atleast we'll sound good going slow.
|
|
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 22nd, 2024 - 10:04 PM |