 7agte swap, head swap harness |
  |
 Dec 22, 2007 - 2:53 PM
|
 
|
|
Enthusiast Joined Aug 26, '06 From USA Currently Offline Reputation: 0 (0%)  |
Hey I was needing your guys help. I am planning on a 7agte build and already have bottom end built. 7afe block bored to 82mm, crower custom rods, polished balanced crank, arais 8.6:1 4age dish pistons.
 My question is that i found a 4age 16v donor car and the main harness has been cut but the engine harness and ecu is still intact. Will I need the main harness, ecu, and engine harness for my guages and everything to work, or do i just need the ecu and engine harness. I have an 95 celica st. Any help or ideas?  |
|
Dec 24, 2007 - 2:01 AM
|
|
 Enthusiast  Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
go standalone
-------------------- yea your 3sgte is cool but ill stick to my 7agte
|
|
Dec 25, 2007 - 12:38 AM
|
|
 Enthusiast Joined Mar 22, '07 From Houston, TX Currently Offline Reputation: 4 (100%) |
yeah. stand alone would be much better..
-------------------- QUOTE "And, as always, your friendship, help, and dedication to the advancement of Texas Celica dominance is GREATLY appreciated. Thanks bro." -DEATH 1994 GT: V6 swap, 5speed E53 W/ LSD, All Power, now RED 1995 ST: SOLD @273k miles, Auto, all power, CarPC, White 1994 ST: Totaled, 5spd, all power, Red RIP 07/09/09 @ 241,810 1994 Lexus LS400: This is my new DD |
|
Dec 25, 2007 - 5:39 AM
|
|
|
Enthusiast Joined Apr 22, '07 From Buckinghamshire, UK Currently Offline Reputation: 2 (100%) |
get the GReddy ultimate emanage.
|
|
Dec 25, 2007 - 10:19 AM
|
|
 Enthusiast Joined Dec 12, '06 From Fob Sharana, Afghanistan Currently Offline Reputation: 2 (100%) |
Does it matter which head is used? Big port, small port, sc block, ect?
|
|
Dec 26, 2007 - 11:28 AM
|
|
|
Enthusiast Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
QUOTE(FunkySR @ Dec 25, 2007 - 4:39 AM) [snapback]625560[/snapback] get the GReddy ultimate emanage. That is a good piggy back with a 7agte i had to change my whole map not just mod it like you can do with the emange and that unit and a stand alone are close in price QUOTE(FortuneCookie @ Dec 25, 2007 - 9:19 AM) [snapback]625581[/snapback] Does it matter which head is used? Big port, small port, sc block, ect? No............ there are 3 4ag heads small and big port and the 20v head -------------------- yea your 3sgte is cool but ill stick to my 7agte
|
|
Dec 26, 2007 - 8:58 PM
|
|
|
Enthusiast Joined Aug 26, '06 From USA Currently Offline Reputation: 0 (0%) |
QUOTE(nik @ Dec 26, 2007 - 11:28 AM) [snapback]625785[/snapback] QUOTE(FunkySR @ Dec 25, 2007 - 4:39 AM) [snapback]625560[/snapback] get the GReddy ultimate emanage. That is a good piggy back with a 7agte i had to change my whole map not just mod it like you can do with the emange and that unit and a stand alone are close in price QUOTE(FortuneCookie @ Dec 25, 2007 - 9:19 AM) [snapback]625581[/snapback] Does it matter which head is used? Big port, small port, sc block, ect? No............ there are 3 4ag heads small and big port and the 20v head So your saying I need a U-Emanage only? Do I still use the 7afe harness and ecu with this or the 4age ecu and engine harness. I believe I have everything figured out except what harness and ecu to use. |
|
Dec 26, 2007 - 10:19 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
QUOTE(boostcrazy @ Dec 27, 2007 - 1:58 AM) [snapback]625876[/snapback] So your saying I need a U-Emanage only? Do I still use the 7afe harness and ecu with this or the 4age ecu and engine harness. I believe I have everything figured out except what harness and ecu to use. I don't think you have everything figured just yet... There are a lot of differences in the way the 7AFE and 4AGE 16V route water lines and mount accessories. As for the electricals, it's best to use a standalone, but if you want to go the easier/cheaper route, use the 4AGE ecu that corresponds to the 4AG head. You'll only need the engine harness and you'll need to modify that harness to interface with the celica dash/body harness. My reccomendation... JDM 4AGZE Map DLI harness and ecu can handle modest boost. If you wanna use USDM stuff, try to find 90-92 Geo Prizm GSI electricals with a piggyback. -------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
Dec 27, 2007 - 11:38 AM
|
|
|
Enthusiast Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
QUOTE(Kwanza26 @ Dec 26, 2007 - 9:19 PM) [snapback]625889[/snapback] QUOTE(boostcrazy @ Dec 27, 2007 - 1:58 AM) [snapback]625876[/snapback] So your saying I need a U-Emanage only? Do I still use the 7afe harness and ecu with this or the 4age ecu and engine harness. I believe I have everything figured out except what harness and ecu to use. I don't think you have everything figured just yet... There are a lot of differences in the way the 7AFE and 4AGE 16V route water lines and mount accessories. As for the electricals, it's best to use a standalone, but if you want to go the easier/cheaper route, use the 4AGE ecu that corresponds to the 4AG head. You'll only need the engine harness and you'll need to modify that harness to interface with the celica dash/body harness. My reccomendation... JDM 4AGZE Map DLI harness and ecu can handle modest boost. If you wanna use USDM stuff, try to find 90-92 Geo Prizm GSI electricals with a piggyback. this is the path i started down with my 7agte build up was the 4agze dli harness etc ......but in the end i needed total control so i went standalone and im so glad i did -------------------- yea your 3sgte is cool but ill stick to my 7agte
|
|
Dec 27, 2007 - 7:40 PM
|
|
|
Enthusiast Joined Aug 26, '06 From USA Currently Offline Reputation: 0 (0%) |
What are some trans options for the 7afe block that will hold modest hp and tq, and of course lsd?
|
|
Mar 28, 2008 - 1:15 PM
|
|
|
Enthusiast Joined Jul 10, '05 From Monroe, WA Currently Offline Reputation: 6 (100%) |
nik how ya liking your SDS?? (sorry to borrow the thread)
-------------------- 94' ST Coupe - 5sfe Motor swap and brake swap.
 |
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 6:47 PM |