brand new paint job, FINISHED PICS PG3!! Options

[slvr_celica_GT_8...]

my cars going for new paint next week at macco, same color. best paint package. no more primer 4 me

[playr158]

make sure you do A LOT of prep work before you take it there...remove your headlights, bumper markers, tails ect.. cause they won't do it.
If you know how to sand prep your car I'd suggest that as well.

This post has been edited by playr158: Jan 30, 2008 - 2:05 PM

[rayneezy23]

how much are you paying??

[bccentaur3]

X2 I'd like tpo know the price you're paying. Not trying to thread jack or anything but I sanded my entire car by hand, is that okay for prep?

[Celicav]

Is Manny doing it? If so, you should be in good hands.

[presure2]

my cars going for new paint next week at macco, same color. best paint package. no more primer 4 me

cool
so your getting the basecoat clearcoat 1300$ paintjob?
for the silver, that would definetly be your best bet.
if not, your wasting money on anything but the cheapest paint job they sell. all the other single stage paint jobs are the same, just a matter of adding clear to it.
like dan said, remove your tails when you get to the shop, pull off the mudgaruds, ect.
if you dont know how to sand a car properly, your prolly better off leaving it, to be honest.
INSIST your car is painted "bumper off"
its the only way to do it, and get proper coverage.
good luck.

[slvr_celica_GT_8...]

yea im goin to the new bedford macco in ma most of my car is sanded there goin to finish the rest for 1400 i cant complain cuz ijust picked up a bike were alot of my money went

[yaj19]

wait, so at macco, we have to take off our own bumpers and such?

[Zelstin]

wait, so at macco, we have to take off our own bumpers and such?

You don't have to but maaco saves time and money by masking everything that's not supposed to be painted (sidemarkers, trim, ect..) instead of removing it. The main reason that they get a bad rep is a lack of prep work so the more you do yourself the better off you'll be.

[presure2]

yea im goin to the new bedford macco in ma most of my car is sanded there goin to finish the rest for 1400 i cant complain cuz ijust picked up a bike were alot of my money went

NOOOOOO
dont go to new bedford.
they are THE WORSE maaco in the NE area. (trust me, we have been re-painting all the NB cabs that the NB store originally did.
drive the extra 15 min to fall river, and i will take care of your car.

better yet, call maaco in fall river, and speak with tim (the owner) or butch (shop manager) tell them manny sent you, and i personally will paint your car.
check out dustins (batman722)car for my work

[slvr_celica_GT_8...]

thanks ill give them a call manny

[OOBE]

Look at that. You just saved youself money, pain and tears. Isn't Manny a bad-ass?

This post has been edited by OOBE: Feb 16, 2008 - 2:03 AM

[slvr_celica_GT_8...]

yea i dropped her off yesturday, and they said ill have it back this friday so i got quick turn around time and a master painter doing the job, thanks manny ill have to try and post some pics

[95st-celica]

x2 on some good quality pics

[presure2]

yea i dropped her off yesturday, and they said ill have it back this friday so i got quick turn around time and a master painter doing the job, thanks manny ill have to try and post some pics

hey no problem man.
if i have time to take some, ill post some in progress pics for ya.
did you do that bodywork behind the passanger rear door?

[playr158]

^^lol

Manny.....repainting 6gc 1 car at a time

[presure2]

we took apart your car today at the end of the day.
what did you do with the rear bolt holes for the spoiler?!
lol
pics tommorow.

[_mikeE]

Aww, I plan to repaint my car in may or june. too bad i don't have Manny near to do it for me lol.

[presure2]

ok so we have a few progress pics.

once we took the paint off this area, (i dont know if kevin did this bodywork or not, but it wasnt the greatest)we found some "bondo" style brand bondo, over an inproperly preped surface, so our shop manager butch worked his magic on this and a few other areas that needed a bit of work. (we have been down a bodyman due to the flu the past couple days..lol luckily our shop manager has 25+ yrs bodywork experience. )


old filler stripped of, and preped.


after a coat of filler, a bit of shaping and a coat of evercoat (finishing putty) its ready to be blocked and primed.

bumper off is the only way to paint the 6gc. this is a spot where you can normally save a little bit of money by removing and reinstalling this kind of stuff, doorhandles, lights ect yourself, keith decided to let us do it.




welded center post wing hole



filled, ready to block and prime



tails out and wing holes:



overall, other than the passanger side damage, and small dent up on the passanger fender, the car is in pretty clean shape, a few small door dings on the passanger side, i could only find one on the drivers side.



we finished sanding the car in the afternoon (pics of that tommorow)
tommorow, it will be finish preped, masked, and painted.
more pics to come!

[Celicav]

Can't wait! Always nice to see a freshly repainted Celi!