6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> Vibrating too much
post Apr 19, 2008 - 10:04 PM
+Quote Post
mikecelica



Enthusiast
***
Joined Jan 31, '07
From Ontario, Canada
Currently Offline

Reputation: 1 (100%)




I've noticed for a while that my car vibrates alot, at first I thought maybe all cars do this, but they dont. All I have on is header,muffler,CIA, the steering wheel vibrates alot especialy while in neutral. Anyone know why this is? And at idle you hear this hissing noise, its the intake but why does it hiss so loud? thanks for any help
post Apr 19, 2008 - 10:16 PM
+Quote Post
bccentaur3



Enthusiast
*****
Joined Jan 29, '07
From Hoyt Lakes, MN
Currently Offline

Reputation: 11 (100%)




What does your car idle at? The hissing is probably a vacuum leak. The vibration could be caused by a shot motor mount. Do the inspections.


--------------------
98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer
95 Celica gt silver- chassis sold
88 Celica All-Trac (Burned to a crisp)
94 Celica gt white (sold)

In need of a rust free chassis!!!!
post Apr 19, 2008 - 10:52 PM
+Quote Post
mikecelica



Enthusiast
***
Joined Jan 31, '07
From Ontario, Canada
Currently Offline

Reputation: 1 (100%)




Idles at around 1000rpm, where are the vacuum hoses? Is it possible to see the bad motor mount by popping the hood, or do I need to get under?

This post has been edited by mikecelica: Apr 19, 2008 - 10:54 PM
post Apr 19, 2008 - 11:24 PM
+Quote Post
bccentaur3



Enthusiast
*****
Joined Jan 29, '07
From Hoyt Lakes, MN
Currently Offline

Reputation: 11 (100%)




You can go under the car and inspect the rear motor mount and front mount. Its right on the cross member. 1000rpm is high. We should be idleing around 750. You def. have a vac leak. Vac hoses are normally found on your intake manifold. Just sprak soapy water or brake cleaner while the car is idleing. If you hear the car get louder than thats where your leak is.


--------------------
98 Celica gt red- totaled deer
94 Celica st black DD (bad weather beater)- totaled deer
95 Celica gt silver- chassis sold
88 Celica All-Trac (Burned to a crisp)
94 Celica gt white (sold)

In need of a rust free chassis!!!!
post Apr 20, 2008 - 3:21 PM
+Quote Post
celicaboy92

Enthusiast

Joined Mar 10, '08
From columbia, MO
Currently Offline

Reputation: 0 (0%)




it maybe u need a front or rear alignment my steering wheel used to shake alot before i got one
post Apr 20, 2008 - 4:00 PM
+Quote Post
mikecelica



Enthusiast
***
Joined Jan 31, '07
From Ontario, Canada
Currently Offline

Reputation: 1 (100%)




QUOTE(bccentaur3 @ Apr 20, 2008 - 4:24 AM) [snapback]666312[/snapback]

You can go under the car and inspect the rear motor mount and front mount. Its right on the cross member. 1000rpm is high. We should be idleing around 750. You def. have a vac leak. Vac hoses are normally found on your intake manifold. Just sprak soapy water or brake cleaner while the car is idleing. If you hear the car get louder than thats where your leak is.


Spray the soapy water right on the intake manifold? I checked it out it doesnt look like any loose hoses not plugged? WHat should I be looking for, unplugged hoses?
post Apr 26, 2008 - 6:28 PM
+Quote Post
6_GEN

Enthusiast
*
Joined Feb 23, '08
From Indiana
Currently Offline

Reputation: 0 (0%)




You should look for cacks in the hoses.If you are idling at 1000 then it must be a small leak,if something was to be unplugged then your rpm's would go above 3000

If you have an aftermarket intake then the hiss comes from that.Actualy if your hoses have never been changed,this is a good time to change them all.They are all hard and brittle after 10+ years.
post Apr 26, 2008 - 8:39 PM
+Quote Post
st18

Enthusiast
*
Joined Nov 20, '07
From Oil City Louisiana
Currently Offline

Reputation: 0 (0%)




i agree with the check the motor mounts and the trans mount my car does the same thing with the shaking and i have chattering in the brake pedal the dealer ship will check them for you they will be cracked and what not but thats what imo it is i had 2 replaced and it got a lot better and now i have 2 more to replace to see if it will stop. by the way those things are freaking high $ to get so good luck hope every thing works out
post Apr 26, 2008 - 9:24 PM
+Quote Post
Kwanza26



Enthusiast
*****
Joined Dec 27, '03
From Nor Cal
Currently Offline

Reputation: 0 (0%)




As already mentioned, it can be:

1: small vaccum leak (easy fix)
2: bad mount (moderate fix)
3: misfire (moderate to moderately hard fix)
4: low compression (aww crap)


--------------------
"It's ok to be naked girl... I'm an artist!"

1995 AT200 Celica ST: stocked out daily driver...

1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies...

1991 SW2x MR2 n/a: bare bones hardtop model soon to be...
post Apr 28, 2008 - 12:50 AM
+Quote Post
tonytutino



Enthusiast
***
Joined Jun 16, '06
From Bowling Green KY
Currently Offline

Reputation: 7 (100%)




you hit any potholes lately man? that did it for me... bent my damn rim and now if i hit 60+ my car shakes like a bat outta hell


--------------------
**If you play My Brute, joing the 6gc.net clan!**

--A section of a kid's actual test that had been scanned--

Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 27th, 2024 - 6:31 AM