 V6 Mounts in a ST & GT, Does it matter? |
  |
 Aug 20, 2008 - 10:51 AM
|
 
|
|
Enthusiast  Joined Feb 6, '08 From Oregon Currently Offline Reputation: 8 (100%)  |
So i know if you were to do a 3sgte swap you'd ideally want to have a gt, and having an ST requires adding different mounts, so If i drop in a V6 (3mzfe) does it matter which model i drop it into?
I know it requires different mounts but how different? Like would it be easier to swap it into a ST or a GT? Thanks If you can find a thread on this... then show me the way, the V6 info thread kinda skips over that part... or i just cant read;) -------------------- 1 JL 1,000/1v2
2 JL 12" W6v2 2 Focal 6.5 component 165a1 Kenwood DDX512 head unit Running 142.6db with the back seat up:) |
|
Aug 20, 2008 - 10:58 AM
|
|
 Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Same basic rules apply off the top of my head. Snap and KESD would know more indepth but yes - Ideally you would want to start with a GT for Tranny and mount reasons [Unless of course you are doing the full swap and then it's just mounts? IDK - Something like that]
--------------------  ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM)  Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
|
Aug 20, 2008 - 11:18 AM
|
|
|
Enthusiast Joined Feb 6, '08 From Oregon Currently Offline Reputation: 8 (100%) |
QUOTE (DEATH @ Aug 20, 2008 - 10:58 AM) Same basic rules apply off the top of my head. Snap and KESD would know more indepth but yes - Ideally you would want to start with a GT for Tranny and mount reasons [Unless of course you are doing the full swap and then it's just mounts? IDK - Something like that] Ya i was going to email them but i figured if i posted it i would get a faster response:) I would be getting a different tranny put it with the motor. -------------------- 1 JL 1,000/1v2
2 JL 12" W6v2 2 Focal 6.5 component 165a1 Kenwood DDX512 head unit Running 142.6db with the back seat up:) |
|
Aug 20, 2008 - 2:25 PM
|
|
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
If you use the tranny from the donor car [Assuming e153 here - correct me if I'm wrong] then you're gonna need GT a mount for the front and DS mount and ST-205 for rear mount and I'm pretty sure they use a custom mount on PS side. Also I think you're gonna need custom axles and a spacer IIRC. Maybe shift cables, throttle cable too?
One of those guys will chime in soon. This post has been edited by DEATH: Aug 20, 2008 - 2:26 PM -------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM) Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
|
Aug 21, 2008 - 12:14 AM
|
|
|
Enthusiast Joined Feb 6, '08 From Oregon Currently Offline Reputation: 8 (100%) |
QUOTE (DEATH @ Aug 20, 2008 - 3:25 PM) If you use the tranny from the donor car [Assuming e153 here - correct me if I'm wrong] then you're gonna need GT a mount for the front and DS mount and ST-205 for rear mount and I'm pretty sure they use a custom mount on PS side. Also I think you're gonna need custom axles and a spacer IIRC. Maybe shift cables, throttle cable too? One of those guys will chime in soon. Ya i know about the custom pass side, and axles, i was just wondering if i were to start with a GT would it be easier than a ST? Cause i can pick up a ST for a lot cheaper than a GT... -------------------- 1 JL 1,000/1v2
2 JL 12" W6v2 2 Focal 6.5 component 165a1 Kenwood DDX512 head unit Running 142.6db with the back seat up:) |
|
Aug 21, 2008 - 8:14 AM
|
|
|
Enthusiast Joined Dec 19, '07 From tx Currently Offline Reputation: 22 (100%) |
Short answer then: yes [For all the same reasons as 3S swap]
-------------------- ENGINE: '93 RC 3S-GTE/WRC CT-20b [18-20PSI] PERF: TRD/HKS/ARP/NGK/MSD/ACT/Blitz/STRI/APEX'i/TwosRus/GReddy/Magnaflo/KOYO SUSP: Tein/Bilstein/SusTech/ INT: SS-III SEATS/Toyota Hyper Sports EXT: WRC/TRD/404 QUOTE (lagos @ Aug 25, 2010 - 10:13 AM) Its a safety feature so that people like you don't end up killing themselves or everyone around them. Slow down Paul Walker. 6GC Chat - Go there: [url="http://www.griffgirl.com/forum/chat/index.php[/url] |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 12:28 PM |