 Rear shocks and struts problem, bolt striped?? help.... |
  |
 Oct 8, 2003 - 9:48 PM
|
 
|
 Enthusiast  Joined Aug 20, '03 From Annapolis, Md Currently Offline Reputation: 5 (100%)  |
ok, so im replaceing my shocks and struts, as i was going the rear, i could not loosen the bolts to the sway bar, i ended up striping, the allen bolt.... it is suchs a sh..y design, has any one done this and know a way to get them undone, or fix?, any thing will probley help... thanks
Doug |
|
Oct 9, 2003 - 12:47 AM
|
|
 Enthusiast Joined Apr 28, '03 Currently Offline Reputation: 0 (0%) |
hacksaw then get new links
|
|
Oct 9, 2003 - 11:39 AM
|
|
 Enthusiast Joined Oct 12, '02 From Cincinnati, OH Currently Offline Reputation: 0 (0%) |
PB BLASTER!
 and lots of it!
|
|
Oct 11, 2003 - 12:34 PM
|
|
 Enthusiast Joined Jul 31, '03 From GA Currently Offline Reputation: 0 (0%) |
EVERYONE runs into this problem. if you look about 10 post down you will see my same questin. for me i was simply putting coilovres on. so: while i was able to loosen them about 85% of the way i couldnt get it any further due to stripping. i ended up just putting on the coilovers with the whole strut assembly still attached to the car thru that linkage. due to you trying to replcace the whole strut you are probaly going to hacksaw them and buy new ones. toyota quoted me $50 per side. I am going to get new one when i replace my shock/struts.
cormudgen |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 30th, 2024 - 4:26 PM |