FS: Parting Out 5SFE engine, CHEAP PARTS! everything must go! Options

[6strngs]

Title says it all. I have a blown 5sfe that I'm parting out. The bottom end is blown due to metal shards getting into it and chewing up the pistons and cylinder walls. It's probably still rebuildable since the gouges weren't that deep, you'd just have to go with .020 or .040 oversize pistons ande overbore it. I'll let the bottom end go for cheap. The top end is still in good shape. Though I'd recommend rebuilding it before using it since it's got 162K on it. I have manifolds, etc. let me know what you need and I'll let you know what I've got.

At this time, I'm just selling the engine parts. I may have some other parts that I need to get rid of too. if I do, I'll post them here. Here's just a few of the parts:

5sfe intake manifold

5sfe stock exhaust manifold w/ heat sheilds

5sfe bottom end, block, crank, pistons, rods - $20 picked up, expect a high-ish shipping charge

5sfe head worked good on my car, has 162K on it. no cams. $35 + ship!!!

stock alternator, dirty but works good

brackets, for PS pump, Alternator, passenger side axle, etc.

valve cover, good condition, not painted

OBD1 (94-95) Manual transmission wiring harnesses. I have one california spec, and one federal spec. both are 98% complete. AFAIK they are both only missing one connector each. they may also be missing the rubber boot where it goes into the firewall. $50 each + shipping

Make an offer on anything! I'll let stuff go cheap to clear my garage. I especially want the engine itself out. Let me know what you need, I've most likely got it if it relates to the engine.

This post has been edited by 6strngs: Mar 10, 2009 - 8:38 PM

[94celicadude]

how much would you want for cams? and what year is the motor/car?

[6strngs]

The engine is from a 94 california spec. Most parts are the same between the cali and federal spec though. For the cams, I was thinking somewhere around $150 + shipping. I'll take the best offer though. Though I'd prefer to get rid of them at the same time as the head.

[6strngs]

first post updated with a couple parts. That's not all that I have though, PM me for anything else you might need. though I don't have any power steering or A/C related components.

[6strngs]

cams sold!!!

Make me an offer on anything!!!

[6strngs]

bump

[92-gt]

Do you have a starter? If so, hoe much??

[6strngs]

sorry, don't have a starter that works

[AzNbOiFrM9i6]

what kinda intake you have?

[NgoFcukinWay]

do you have a BVSV?

[6strngs]

what kinda intake you have?

only intake I have for sale is one for a turbo 5sfte/3rd gen 3sgte set-up.

do you have a BVSV?

If only I knew what that stood for... something vacuum switching valve? if so then probably, let me know what you need. I have a couple

[NgoFcukinWay]

it's that blueish/green thing on the far right of the water neck. it's got like two nipples or whatever coming out of it.

[azn87]

do u have the dp with the cat on it? for lewfx

This post has been edited by azn87: Mar 17, 2009 - 4:34 PM

[6strngs]

it's that blueish/green thing on the far right of the water neck. it's got like two nipples or whatever coming out of it.

yep I've got that. How bout the whole water neck for $10 + $5 for shipping?

do u have the dp with the cat on it? for lewfx

I have the manifold with the primary cat, not the front exhaust pipe with the secondary cat. Not sure which he is looking for.