6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> What Color????? Poll.......
Brake Calipers.......
You cannot see the results of the poll until you have voted. Please login and cast your vote to see the results of this poll.
Total Votes: 28
Guests cannot vote 
post Jun 23, 2009 - 9:05 AM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




I did a couple of photochops but can't access them from work, will post later. Obviously doing brakes on my car soon, and have narrowed it down to two colors for the calipers/brackets: Yellow and Red. The red to me is pretty played out, but looks good. The yellow would REALLY attract attention to the GT4 calipers up front (and hopefully rear down the road) and frankly in the chop didn't look too bad.

So what say ye, discerning eye of the 6GC.net world? Yellow or Red?

Photo's tonight, I swear.

PS. I know this is about brake calipes, but felt it was better suited for External Styling because it isn't based around mechanics at all. Mods please move it I fubar'd the right forum. biggrin.gif


--------------------
post Jun 23, 2009 - 10:54 AM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




yellow?
i think i understand the reasoning, but YELLOW?!?
naa, man, do em red.
or better, do em black, and do the lettering the color of the car.


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Jun 23, 2009 - 10:58 AM
+Quote Post
samir0189



Enthusiast
****
Joined Mar 8, '08
From Orlando, Florida
Currently Offline

Reputation: 14 (100%)




Doesnt the 205 calipers have the "celica" written on it? If so id say match the new color of the car, with silver lettering.

I agree that red is over-used, but more commonly i see the like fire engine red, if you do yours with the new color of your car, it would make it look more luxurious, imo.

This post has been edited by samir0189: Jun 23, 2009 - 10:59 AM


--------------------
My F/S Thread!

QUOTE
(14:19:21) Daniel: That was a JDM hole in the side of the box too. There was so much JDM trapped inside that box that they couldn't contain it, so they had to put a JDM hole in the box to let the JDM out.

QUOTE
Ferdi says (11:29)
No, it looks like a hooker put her acid vag on your hood. Acid vag = bigger problem than a few dings.
post Jun 23, 2009 - 11:02 AM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




The problem with it is that my powdercoater won't be able to color match the car. The paint has too much of a dynamic fluctuating color to try to match in a powdercoat.

Believe it or not, the yellow didn't look half bad when I photoshopped it. I couldn't make it as bright as I wanted, but it didn't look terrible at all. I may be able to post the pics this afternoon as I have to get out of work to go to the Dr. w/my wife, and I am snagging the rest of the day after that.

I kind of like the yellow for the fact that it would really bring attention to the fact that "Hey, there's something going on with the brakes."

At least I didn't put blue as an option. My wife suggested it, I did a photoshop rendition, and she promptly said "Delete that ****e." biggrin.gif


--------------------
post Jun 23, 2009 - 11:16 AM
+Quote Post
jimmykay

Enthusiast
***
Joined Jul 14, '08
From St. Louis
Currently Offline

Reputation: 2 (100%)




definitely yellow. I think if you went with red, there's no way you could match the body color and it would just look off.

Second option would be black with a dark red lettering.


--------------------
'99 Celica GT - Sold
'11 Mazdaspeed3
post Jun 23, 2009 - 11:20 AM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




QUOTE (Fastbird @ Jun 23, 2009 - 11:02 AM) *
The problem with it is that my powdercoater won't be able to color match the car. The paint has too much of a dynamic fluctuating color to try to match in a powdercoat.

Believe it or not, the yellow didn't look half bad when I photoshopped it. I couldn't make it as bright as I wanted, but it didn't look terrible at all. I may be able to post the pics this afternoon as I have to get out of work to go to the Dr. w/my wife, and I am snagging the rest of the day after that.

I kind of like the yellow for the fact that it would really bring attention to the fact that "Hey, there's something going on with the brakes."

At least I didn't put blue as an option. My wife suggested it, I did a photoshop rendition, and she promptly said "Delete that ****e." biggrin.gif

yea, the blue wouldnt look right with that awesome paint.
i know powdercoat cant match the paint, but i think the normal paint would hold pretty well on just the lettering, over a black caliper, and still would draw your attention, without saying "LOOK! MY BRAKES ARE YELLOW!!" lol


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Jun 23, 2009 - 11:30 AM
+Quote Post
playr158



Enthusiast
*****
Joined May 22, '03
From NOVA
Currently Offline

Reputation: 16 (100%)




black.....keep it simple stupid yellow will look hideously gaudy and poke someone in the eye, it only works if your car is actually yellow.

This post has been edited by playr158: Jun 23, 2009 - 11:31 AM
post Jun 23, 2009 - 11:32 AM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




QUOTE (presure2 @ Jun 23, 2009 - 11:20 AM) *
QUOTE (Fastbird @ Jun 23, 2009 - 11:02 AM) *
The problem with it is that my powdercoater won't be able to color match the car. The paint has too much of a dynamic fluctuating color to try to match in a powdercoat.

Believe it or not, the yellow didn't look half bad when I photoshopped it. I couldn't make it as bright as I wanted, but it didn't look terrible at all. I may be able to post the pics this afternoon as I have to get out of work to go to the Dr. w/my wife, and I am snagging the rest of the day after that.

I kind of like the yellow for the fact that it would really bring attention to the fact that "Hey, there's something going on with the brakes."

At least I didn't put blue as an option. My wife suggested it, I did a photoshop rendition, and she promptly said "Delete that ****e." biggrin.gif

yea, the blue wouldnt look right with that awesome paint.
i know powdercoat cant match the paint, but i think the normal paint would hold pretty well on just the lettering, over a black caliper, and still would draw your attention, without saying "LOOK! MY BRAKES ARE YELLOW!!" lol


So what you're saying is don't do the yellow??? wink.gif laugh.gif

My wife also mentioned Silver, but there's just not enough silver on the car to pull it off. I don't want to go black because it would be nearly invisible behind the wheels...........If I matched the red to the wheel lip and did the "Celica" lettering in black though........that might work.


--------------------
post Jun 23, 2009 - 12:02 PM
+Quote Post
jordisonjr



Enthusiast
*****
Joined Jan 20, '09
From Winnipeg
Currently Offline

Reputation: 5 (100%)




Yellow on calipers I find gets really dirty too, and it really shows when they are dirty. I wouldn't do yellow


--------------------
-Protection mode, For when your amp tries to blow its load.

1995 Toyota Celica GTS - Daily Driver
1999 Chevy Cavalier - Winter Beater
1994 Honda Civic CX Hatchback - Dead

My Celica!
post Jun 23, 2009 - 12:34 PM
+Quote Post
96bluevert



Enthusiast
*****
Joined Mar 19, '07
From Washington
Currently Offline

Reputation: 9 (100%)




I like Manny's suggestion of just doing the lettering in red. IMO, they wouldn't have to even color match the car to still look good.

But, yeah yellow would probably seem a little out of place you your car.


--------------------
"A true car enthusiast can see the potential in any car"



QUOTE (njccmd2002 @ Oct 3, 2008 - 2:01 PM) *
i rather be a slow turtle in risk of extinction, than a fast locust, that you can see everywhere and need to be terminated.
post Jun 23, 2009 - 12:36 PM
+Quote Post
terbear4god4life



Enthusiast
****
Joined Oct 10, '08
From sweet home, OR
Currently Offline

Reputation: 3 (100%)




what about white?


--------------------
"she can polish my strut bar anytime As long as her blow-off valve's in good order"
post Jun 23, 2009 - 1:03 PM
+Quote Post
Nial



Enthusiast
***
Joined Aug 25, '08
From England
Currently Offline

Reputation: 1 (100%)




Do what I did, paint them matt black and I then filed over the lettering so they came up silver but with nice crisp edging



--------------------
My Facebook GT4 Build page.
https://www.facebook.com/groups/GT4Rebuild
post Jun 23, 2009 - 3:49 PM
+Quote Post
presure2



Moderator
*****
Joined Oct 1, '02
From fall river, ma
Currently Offline

Reputation: 13 (100%)




QUOTE (Nial @ Jun 23, 2009 - 1:03 PM) *
Do what I did, paint them matt black and I then filed over the lettering so they came up silver but with nice crisp edging


win.


--------------------
Former Team 5SFTE pro member ;)

13.6@108MPH, 5SFTE Powered
post Jun 23, 2009 - 4:48 PM
+Quote Post
Fastbird

Enthusiast
*****
Joined Jun 25, '05
From Fort Wayne, IN
Currently Offline

Reputation: 14 (100%)




Ok, here's the chops I did last night. Just a simple color replacement so they're not perfect.



and



--------------------
post Jun 23, 2009 - 5:15 PM
+Quote Post
terbear4god4life



Enthusiast
****
Joined Oct 10, '08
From sweet home, OR
Currently Offline

Reputation: 3 (100%)




white with gloss black celica tongue.gif


--------------------
"she can polish my strut bar anytime As long as her blow-off valve's in good order"
post Jun 23, 2009 - 6:07 PM
+Quote Post
azian_advanced



Enthusiast
*****
Joined Apr 18, '05
From Calgary
Currently Offline

Reputation: 20 (100%)




the question is: do you want a color that stands out? or one that is more discreet and subtle?
my preference is gunmetal silver as it goes good with some shiny rotors (pic). but don't go chrome.. they're too much of a bling factor.


--------------------
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------

Reply to this topicStart new topic
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 11th, 2024 - 6:48 AM