New supra tail light & rear end conversion, fabricatiion supra rear end for a cupple hundred dollars Options

[deathdoakill]

well ive finally decided to do a full supra rear end and tail light conversion so far after one day ive done the cutting and metal work now im going to mold the rear end ill post pictures soon let me know wut you all think i just decided to post this to see if anyone has any ideas on this i havent seen anything on how to start this but im pretty good at fabricating parts so im begining in a few hours ive got only one day to do this and make my car drivable i have to work the next day soooo yeah ive managed to get all the the tails and the rear bodykit bumper cover for $180. soo im pretty much set as far as parts go let me know if yal have any ideas latazz pepo

[cyprus_gt]

[j0e_p3t]

hope the end product looks something like this...

[dustin15brown]

OreO's car was definitely the best conversion i've seen.... I hope you hit something similar

[richee3]

You got all that for $180? Good deal. I need you around when I start shopping for car parts haha.

OreO's car turned out great, others have not turned out so great, but they left the 6th gen bumper on the car. Sounds like you've got a good plan though, so best of luck to you. Pics ASAP.

[spolski07]

your doing this in san antonio! dude im local and would love to come by and check it out!
lmk!

[deathdoakill]

This post has been edited by deathdoakill: Aug 15, 2009 - 6:14 AM

[j0e_p3t]

[deathdoakill]

ok guys keep in mind ts still a work in progress and its no where near done only had about five hours to get it as much done as i could

[email=""]supra rear[/email]

This post has been edited by deathdoakill: Aug 15, 2009 - 6:18 AM

[deathdoakill]

Figured i'd throw in a cupple of front pics here

[deathdoakill]

sorry wrong pict thats my cougar ill fix later tired havnt slept time for the devil to sleep now if yal have any good ideas or concepts drawings for cool parts that havnt been made yet for our cars let me know if its pretty good ill probly fabricat the part if possible now sleep then work work work to finish

[deathdoakill]

oooh yeah if yal wanna chck out any of my other projects chk out my myspace for more picts http://www.myspace.com/deathdoakill

[playr158]

you did a good job on the rear, i'd be interested to see pictures of your process of mounting the tails, cutting ect.
how did you get it to fit?

and please dear god get rid of the huge ass lights in the front

[garin]

on the rear... on the front... come on man, that rear looks so good, so far. the front is just not up to the same level of excellence! props on the back end though!

[deathdoakill]

most definetly i agree im not happy with the front either ive only had the car a cupple months its from one just of my other celicas just so happens that its a front end i had molded a while back not to fond of it but good enough for a copy at least only ran about forty to make

This post has been edited by deathdoakill: Aug 15, 2009 - 2:03 PM

[SwissFerdi]

The lights look great! Not a fan of the front at all nor the design of the rear bumper, but I guess you needed that specific one to make it fit?

Good luck with the project.

[black13]

ahh so the trick is to use the supra rear bumper! How hard is fitting that bumper? did it require alot of cutting as well?

But no your work looks pretty good, the front isn't bad either if you remove to fog lights. Paint the whole car black and you got it good.

[Spider77]

you did a good job on the rear, i'd be interested to see pictures of your process of mounting the tails, cutting ect.
how did you get it to fit?

and please dear god get rid of the huge ass lights in the front

IM with this. Want to see how you went about getting that all lined up. As far as your big ol fogs...Im sure if they were molded in there they would look great.

[richee3]

What are you going to do about the Supra bumper hanging down quite a bit lower than the Celica fenders, just out of curiosity?

[xs94st]

I am with richee about the rear bumper being lower.

The front end does need work, but I have confidence that if you can make the supra rear light conversion work, you'll be able to work the front end out. =)

Great job thus far man!