 Brake Caliper Brackets, HELP!!!! |
  |
 Aug 22, 2009 - 1:15 PM
|
 
|
 Enthusiast  Joined Sep 6, '08 From Burlington Currently Offline Reputation: 0 (0%)  |
Hey everyone,
I have a 94 and I have run into a problem. First time owner and not sure of any tricks with the brakes on these cars. My caliper bracket bolts are seized. The 14mm's in the rear and the 17mm's in the front. I was wondering if you know any tricks to get them out? I have tried penetrating oil, WD40, Rust Check and using an impact gun. Only other method I know is to heat them and crack them out. Any other ideas?? Please let me know. Going nuts, and have all the brake stuff ready to go on. Thanks in advance for your help. |
|
Aug 22, 2009 - 1:26 PM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
did you soak then in penetrating oil?? soaked mines for 30mins in penetrating oil. then after tried to move it while shooting oil.
tried banging the bolt?? if its seized i would use a cheater bar(long one lolz) instead of an impact. much safer for this situation. -------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
|
Aug 22, 2009 - 1:31 PM
|
|
|
Enthusiast Joined Sep 6, '08 From Burlington Currently Offline Reputation: 0 (0%) |
have tried to use a breaker bar... but no movement. i left the bolts for about an hour. Had to use other car to run an earrand. No movement. Should i try it again??
|
|
Aug 22, 2009 - 1:44 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
there is one that freezes them and mini cracks them. cant remember. try searching in this forum/
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Aug 22, 2009 - 4:41 PM
|
|
 Enthusiast Joined Jan 25, '06 From MN Currently Offline Reputation: 19 (100%) |
PB blaster and long big breaker bar thats what I used to get mines out. :D
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 10th, 2025 - 8:25 AM |