 Will this Work?, Header on a 7AFE |
  |
 Oct 16, 2009 - 5:19 PM
|
 
|
|
Enthusiast  Joined Jul 23, '09 From Vermont Currently Offline Reputation: 1 (100%)  |
Hey All, So I'm almost done with my engine problems. 1 burnt exhaust valve, bad water pump and a busted exhaust manifold. 2 new valves, water pump, timing belt, etc. So anyway I'm putting a header on to replace the ehaust manifold. Came with the flex pipe, BUT, no hole for the O/2 sensor. only the one for the pre converter in the header itself. Anyone have any ideas how disconnecting the second O/2 sensor will affect everything?
Thanks in advance. Ron. 
|
|
Oct 16, 2009 - 5:37 PM
|
|
 Enthusiast Joined Feb 5, '05 From pineapple under the sea Currently Offline Reputation: 9 (100%) |
Take the header (or just the secondary pipe) to an exhaust shop and tell them to weld an o2 bung on. Then plug yours in when you install. Because you don't want to drive without it unless you like CEL's.
-------------------- 1991 MR2 - T-tops - Crimson Red - Gen3 3SGTE - Lots of money
 I'm not really an asshole, but I play one on the internet. **** Photobucket |
|
Oct 16, 2009 - 7:36 PM
|
|
 Enthusiast Joined Jan 25, '06 From MN Currently Offline Reputation: 19 (100%) |
Discounting the secondary 02 sensor will not throw a code or anything it shouldn't as long as the primary 02 sensor is working and connected. If u feel safer with it connected try what the other guy posted or you can do it yourself if u know how to.
-------------------- "To Protect And To Serve The Wealthy" -POLICE
|
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 29th, 2024 - 5:50 PM |