OEM FOGLIGHT INSTALL! NEED HELP!!! Options

[JDUB]

i just bought some oem preface foglights

i need to know, what size bolts i need to mount them up,


the wires were cut, about a inch of wire there still


and also what else do i need for the install and HOW to, thanks
(links would help, for where to buy this stuff)

[benzo]

i just bought some oem preface foglights

i need to know, what size bolts i need to mount them up,


the wires were cut, about a inch of wire there still


and also what else do i need for the install and HOW to, thanks
(links would help, for where to buy this stuff)

1sttoyotaparts.com


http://www.6gc.net/forums/index.php?showtopic=38656

but that link is for 96+ it might be of some help tho

This post has been edited by benzo: Feb 12, 2010 - 5:20 PM

[Remy]

When I installed mines their were bolts on the crash bar already check ur crash bar you might have bolts where it lines up already.

[GriffGirl]

We were neighbors and now we're not.

IIRC it's either 12mm or 14 mm bolts in there; pretty sure it's 12. Home Depot is your friend.

[GrimReaper]

It's 5 or 6mm 1.25 or 1.5 threads, with 10mm heads for the bolts. It's the exact same bolts as for the horns, so you can use one of these to get the same bolts.

You'll need to remove the lower mud shield to access the very outside bolts (plz forgive my english here!!), it's pretty tricky and you might have to pry the bumper cover to reach them from under the car.

Hope this will help.

This post has been edited by GrimReaper: Feb 12, 2010 - 8:38 PM

[JDUB]

which boltttt? lol there was like 3 differnt answers, wat else do i need other than the bolts

[96stgreendemon]

Go to autozone and buy the big ass import bolt kit, that's what I used in mine