6G Celicas Forums

Welcome Guest ( Log In | Register )

 
Reply to this topicStart new topic
> How can I get this off?
post Aug 8, 2010 - 2:12 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)






When I first got her, it was just a black strip across the rear window. But that was in the fall/winter. Now it's summer and the blazing Texas sun cracked it all up and I want it gone. I was thinking a razor blade, goo-gone, and LOTS of wax on/wax off but I wanna see if you guys have an easier way.


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Aug 8, 2010 - 2:23 PM
+Quote Post
conus00

Enthusiast
***
Joined Jul 10, '08
From Tampa, FL
Currently Offline

Reputation: 8 (100%)




Razor blade + heat gun (don't get too hot or you bust your window). After the worst is removed, just clean the residue with thinner or alcohol.


--------------------
'94 ST
post Aug 8, 2010 - 2:25 PM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




QUOTE (conus00 @ Aug 8, 2010 - 2:23 PM) *
Razor blade + heat gun (don't get too hot or you bust your window). After the worst is removed, just clean the residue with thinner or alcohol.

I don't the slightest clue how to use a heat gun, dude. I don't even know where to get one lol


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200
post Aug 8, 2010 - 7:36 PM
+Quote Post
block



Enthusiast
*****
Joined Jul 27, '06
From Soda
Currently Offline

Reputation: 9 (91%)




walmart. or else use a hair dryer lol.


--------------------
post Aug 8, 2010 - 9:00 PM
+Quote Post
NewOrleans

Enthusiast
**
Joined Jan 27, '09
From New Orleans
Currently Offline

Reputation: 4 (100%)




straight razor after spraying it with some water. it will take a little time. but it will come off clean


--------------------
post Aug 8, 2010 - 10:20 PM
+Quote Post
thisguy18



Enthusiast

Joined Nov 5, '09
From Nashville
Currently Offline

Reputation: 0 (0%)




ummm
use a hair dryer to heat it up
then pour some goo gone
then use some floss or fishing line
i wouldnt use a razor blade but u can if you are careful with it
its gonna take a bit of time and some elbow grease either way
oh and heat it up every so often but make sure any adhesive remover is dry cause it could catch fire

This post has been edited by thisguy18: Aug 8, 2010 - 10:21 PM
post Aug 9, 2010 - 12:43 AM
+Quote Post
HectortheRican



Enthusiast
*****
Joined Dec 26, '09
From Albuquerque, NM
Currently Offline

Reputation: 19 (100%)




QUOTE (thisguy18 @ Aug 8, 2010 - 10:20 PM) *
ummm
use a hair dryer to heat it up
then pour some goo gone
then use some floss or fishing line
i wouldnt use a razor blade but u can if you are careful with it
its gonna take a bit of time and some elbow grease either way
oh and heat it up every so often but make sure any adhesive remover is dry cause it could catch fire

Pour it how? just, over it?

QUOTE (NewOrleans @ Aug 8, 2010 - 9:00 PM) *
straight razor after spraying it with some water. it will take a little time. but it will come off clean


I'm going to try this first since it's just water


--------------------
taking too long to mod since '09
June '12 COTM
'95 AT200

Reply to this topicStart new topic
5 User(s) are reading this topic (5 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 16th, 2025 - 11:16 AM