FS: Aluminium Under Panel for 6GC - Last 12 pieces in NJ, To avoid shipping delay prefer NJ/East Coast Pick Up usd$200 Options

[vincent_doggy]

Mother


What's it look like after install



This post has been edited by vincent_doggy: Mar 10, 2015 - 4:31 AM

[azian_advanced]

i don't think resin would be a good choice. wouldn't it be more prone to fracture if it were to skid against the pavement? i think it should stay aluminum. that way if it bottoms out, it'll just make a dent.

This post has been edited by azian_advanced: Aug 19, 2010 - 4:56 PM

[vincent_doggy]

i don't think resin would be a good choice. wouldn't it be more prone to fracture if it were to skid against the pavement? i think it should stay aluminum. that way if it bottoms out, it'll just make a dent.

If those are fiber glass, it would fracture for sure... but at the moment I dunno what the exact name of that material... might not be exactly resin, but must contain some sort of plastic inside.

And if not much interest, I will simply pass. Then its not the matter of choosing what kinda material.

[block]

hey, depending on price i should have a good amount of interest in this.

[95-Abel]

Hey vince count me in I want one for sure.

[epicCT]

Depending on the price I would also be very interested. I will be driving my Celica in the snow so it would definitely be good to have this protection.

[SupraKid]

I would be interested,but i agree with azian, most of the ppl that will be able to afford this are already somewhat modified i would think,meaning they would be lowered=a lot of abuse on this thing.

What about the oil drain plug?I see a small hole in it,but the oil isnt gonna shoot through that the entire drain time...

[2bcelica]

1) 2bcelica

[MGCustoms325]

Put me on the list too. Wouldnt a complete under car cover be better for aerodynamics?

[chacha]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?

[windowlicker]

how much are you looking at as a price? also if you are making them out of aluminum, what thickness are you gonna use? i'm looking for a skid plate, but i don't want to spend an ass load on one since i'll be beating the hell out of it with rallying the car. i made one that worked for a while, but got tore up pretty good from the 2009 rallyx season. if this is reasonably priced, i may go for it.

[Seztor]

Looking good :-)

is it stainless steel vince?

[CELL_PROTOTYPE_X]

I'm interested

[malpaso]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Malpaso (under good financial conditions = count me 5x )

[mak5603]

If the price is right, i'm in!

[palooke]

ABS plastic like OEM?

[Haugbjorg]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg

[luka]

would you know the rough dimensions?

[vincent_doggy]

would you know the rough dimensions?

Not in my hand now, sent to supplier for quoting price at the moment

ABS plastic like OEM?

No, not ABS.
Change my mind to stick on Aluminium

Looking good :-)

is it stainless steel vince?

SS would be too heavy, should be Aluminium

[ZGear]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg
5) ZGear (omg, shipping something this big ) Please have shipping quote ready too.

[96stgreendemon]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg
5) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
6) 96Stgreendemon (depending on price) definitely need this

[abflug]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg
5) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
6) 96Stgreendemon (depending on price) definitely need this
7) abflug (interested if the price is good)

[mak5603]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg
5) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
6) 96Stgreendemon (depending on price) definitely need this
7) abflug (interested if the price is good)
8) mak5603 (Depending on price)

[Malhar95]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg
5) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
6) 96Stgreendemon (depending on price) definitely need this
7) abflug (interested if the price is good)
8) mak5603 (Depending on price)
90 Malhar95 (Depending on price)

[windowlicker]

any word on pricing?

[KAOS]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg
5) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
6) 96Stgreendemon (depending on price) definitely need this
7) abflug (interested if the price is good)
8) mak5603 (Depending on price)
9) Malhar95 (Depending on price)
10) KAOS - I would love to get rid of that CRAP ABS stuff from underneath my car...

[808celica]

V_D you gonna use a wind tunnel to test the aerodynamics of your underpanel??? Just curious

[malpaso]

V_D you gonna use a wind tunnel to test the aerodynamics of your underpanel??? Just curious

Why? C-ONE already did that

[vincent_doggy]

V_D you gonna use a wind tunnel to test the aerodynamics of your underpanel??? Just curious

Why? C-ONE already did that

haha, Mr. President, fly to Hong Kong, dig a tunnel for me, then we can set up the said test

[windowlicker]

any new info on this??

[Jdog1385]

count me in if you're still doing this. my stock under panels are a mess.

[Tigawoods]

in

[cyberblader1130]

I'll take one if you decide to make these, my under panels are destroyed.

[windowlicker]

bump for updates???

[windowlicker]

???????????????????????????????????????????????????????????

[delusionz]

is this for keeping out stones and dirt, or is it actually gonna be a skid plate? i'd be down for the skid plate

[vincent_doggy]

Soon guys, and believe me
Gonna be affordable~

[DEATH]

Would it be possible to bend the sides up to form a 1/2" lip? The reason is I don't want any dripping fluids or A/C condensation getting anywhere near the wheels.
I'm very interested in one depending on price.

[DaCCelica94]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ? biggrin.gif
3) Malpaso (under good financial conditions = count me 5x smile.gif)
4) Haugbjorg
5) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
6) 96Stgreendemon (depending on price) definitely need this
7) abflug (interested if the price is good)
8) mak5603 (Depending on price)
9) Malhar95 (Depending on price)
10) KAOS - I would love to get rid of that CRAP ABS stuff from underneath my car... biggrin.gif
11) DaCCelica94 count me in since it will be affordable

[malpaso]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) KAOS - I would love to get rid of that CRAP ABS stuff from underneath my car...
10) DaCCelica94 count me in since it will be affordable

I'm off the list folks... sorry.

[chacha]

???

[vincent_doggy]

Folks here's some updates:

The MOQ for this order is 30pcs, gonna leave 5 pieces here in Hong Kong for local members.

The rest I am gonna send to Culpable04, NJ~

The most quantities would be 25 pieces in this batch~
This batch might only entertain US members, O'Canada or anywhere nearby~

The rough cost for the plates is around usd$170-200/pcs

This includes One Plate and 2 brackets(Pics would be posted once the sample is make) + Shipping cost from supplier to Culp's door, since I need to confirm the cost from supplier to EC, and Culp need to help me to pick up from the nearest port.

Once all the cost finalize, I would post up the exact cost and ready to collect your fund~

Regarding the domestic shipping cost from NJ to your home, I have no clue~
If you live at EC or somewhere nearby, you are lucky~

I am not sure if this price are attractive enough or not, but thats the best quote I could get~

Put your name down again if you really really interested and fund ready:

This post has been edited by vincent_doggy: Feb 27, 2011 - 9:44 AM

[BK94ST]

Can you post the pic again? The only thing I can see is a red X.

[vincent_doggy]

Can you post the pic again? The only thing I can see is a red X.

Pics up

[chacha]

i need to know what the full price ship to the USA vince...let me know

[vincent_doggy]

i need to know what the full price ship to the USA vince...let me know

USD$170-200 to NJ, USA

[chacha]

This post has been edited by chacha: Feb 27, 2011 - 3:44 PM

[Lazurus]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) KAOS - I would love to get rid of that CRAP ABS stuff from underneath my car...
10) DaCCelica94 count me in since it will be affordable[/quote]
11) Lazurus (Need a total cost when you get it)

[MGCustoms325]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) KAOS - I would love to get rid of that CRAP ABS stuff from underneath my car...
10) DaCCelica94 count me in since it will be affordable[/quote]
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325

[96stgreendemon]

Im still in, just curious as to if the ease of changing the oil will still be the same?

[Ted95]

Im still in, just curious as to if the ease of changing the oil will still be the same?

wondering the same thing. and isnt thi going to be heavier over all then the platic ones? but will be more aero dynamic? just tryin to figure this thing out, i like the look of it.

[vincent_doggy]

Im still in, just curious as to if the ease of changing the oil will still be the same?

Since, 6GC have few engines equipped

7AFE, 5SFE, 3SFE, 3SGE, 3SGTE, 4AGE......

I might redesign or simply cut a hole for easy oil change for my 3SGE...

But I don't think that are universal for all type of engine, I mean the hole.

So, I believe we better leave ot and stick with the C-ONE style design.

This post has been edited by vincent_doggy: Feb 28, 2011 - 10:52 AM

[vincent_doggy]

Im still in, just curious as to if the ease of changing the oil will still be the same?

wondering the same thing. and isnt thi going to be heavier over all then the platic ones? but will be more aero dynamic? just tryin to figure this thing out, i like the look of it.

Anyway, after thorough consideration, stick with aluminium would be the best bet.

The Genuine C-ONE is about 4kg, the one I am gonna make would use same grade material and spec.

I don't have an air tunnel to test the aero dynamic, but I bet C-one did that for long.

This post has been edited by vincent_doggy: Feb 28, 2011 - 11:21 AM

[Culpable04]

there are aerodinamic improvements with this item, but the really significant is the protection it offers to the oil pan, under panel is more known as skid plate, it aids to protect the lower portion of the engine / trans from rocks and foreign objects on the road. off road vehicules have it and is a must for a lowered car, I willl try to take pictures of what a rock did to my exhuast, gladly it was the exhausty and not my oil pan that was 6 inches to the left. this panel will add a lot of piece of mind when driving lowered on the streets.

[KAOS]

USD$170-200 to NJ, USA

So, let me get this right; we're supposed to pay for shipping to NJ, USA, and then pay for shipping/customs, etc from there to our doors?

Thats a little bizarre, but I understand the shipping in bulk thing.

Sounds like it could be a great product, but not for what its going to cost to get it to me, I'll pull out of the listing.

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) spot available
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325

[Culpable04]

this is taken from C-one website

The C-One aluminum under panel protects the engine from objects passing underneath and provides reduced aerodynamic drag and increased stability at high speeds.

2mm thick aluminium
Reduces aerodynamic drag at high speeds using a flat surface
Increases stability at high speeds reducing front end lift
Protects the underside of the engine

is now discontinued and the retail price was someone close to 350 dollars + shipping to your door.

[mak5603]

Yeah i still want one.

[Fate]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325

in.

[Culpable04]

all this talking and didn't even put my name down before lol


1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04

[Boz205]

Whats the rough timeframe on these mate?
and shiping to Aus

[vincent_doggy]

Whats the rough timeframe on these mate?
and shiping to Aus

sorry mate, if u can gather 10 members in OZ, I might make another order just for you guys.
The 1st sample would be out in 3 weeks time

[Tigawoods]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Haugbjorg
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)

[Haugbjorg]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)

Sorry, I'm out.

[Lazurus]

timeline???

[3WayStunna]

Well since C-ONE is offically out of business.....I shall add my name to the list...in #3 spot..

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)

[abflug]

Can you give me a price range for shipment to Belgium in Europe?

[Cs91]

I´ll jump in for a shipment to Europe mate, got a lot of your equipment in my car already, and this would be a nice addition. Gimme a price and ill send over the money through paypal.

[vincent_doggy]

I am still try to sort out a shipping methods for European members~

[Black-ST202]

I´ll jump in for a shipment to Europe mate, got a lot of your equipment in my car already, and this would be a nice addition. Gimme a price and ill send over the money through paypal.

1 more from Norway here that would like to buy. Could try and see if we could fix a group buy here aswell.

[Artega]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)

[vincent_doggy]

Just pay the factory a visit earlier today~
Its really worth to queue and wait~
The only word I can say is "WOW"~
Under Panel would be ready real soon!


Hugh Waterjet Machine~



Some other sample product thats are really impressive~


This post has been edited by vincent_doggy: May 21, 2011 - 11:56 AM

[mak5603]

Nice! I can't wait.

[vincent_doggy]

The 1st prototype, just need a small modification b4 launch~
Get ready to put some money aside~



This post has been edited by vincent_doggy: Jun 6, 2011 - 1:06 PM

[Culpable04]

can't wait for this

[KAOS]

omg - whats the shipping going to be on a panel that size? (ballpark/estimated?)

Very sexay prototype Vincent!

[jordisonjr]

Whats the price on the actual product going to be??
ANy Ideas?

[vincent_doggy]

The actual price and cost would post up once I confirm with the shipping quote from a Freight forwarder ~
The approx size is 1m x 1m, not sure it would exceed the post office dimension or not.
One Panel + 2 Brackets per set
2mm thick Aluminium

Like I mentioned b4, Culpable04 might help me to pick up the hugh pack from nearest port or I will send in bulk to his door steps, then he would help me to send from there at your own cost.

This post has been edited by vincent_doggy: Jun 6, 2011 - 1:45 PM

[BonzaiCelica]

good stuff so far. Would you be able to still fit the wheel wells or whatever they are called. The black undertrays that fit along the inside of both fenders??

[vincent_doggy]

good stuff so far. Would you be able to still fit the wheel wells or whatever they are called. The black undertrays that fit along the inside of both fenders??

That would be exactly the same as this, except the brand

[BonzaiCelica]

ah ok I didn't pay much attention to the pic at first. Yes I see that the wheel wells are still fitted. thanks...

[vincent_doggy]

Further info. would be provide tonight~

Since I would send the hugh pack to JFK via air cargo, and Culpable04 would help me to pick up from there.
The cost for the air cargo from Hong Kong to EC would share by u guys, I would bear some of couse, the more you guys actually down could save some for sure

Might be one time only! Don't miss the chance

[mkernz22]

so how much just for one? not including shipping

[vincent_doggy]

USD$170 1 plate + 2 Brackets + 1 white Cartoon box

[cjh4l22]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)

latest list.
Interested in shipping cost once culpable has them in his posession.

This post has been edited by cjh4l22: Jun 15, 2011 - 1:49 AM

[malpaso]

...

...

Amazing view mate! Great job!

[jordisonjr]

1) 2bcelica
2) CHA (everything for front panel and a rear diffuser) ?
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)

latest list.
Interested in shipping cost once culpable has them in his posession.

Myself as well.
Is this going to sit lower than the underbody plastics already on the car?
just worried about scraping on the roads.

[KAOS]

When do the Carbon Kevlar versions come out?

jk - nice project though!

[chacha]

1) 2bcelica
2) CHA (BLUE)
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)


I figure i update on the color.

This post has been edited by chacha: Jun 15, 2011 - 11:51 AM

[robby]

Vinc pls sent to my workshop first

I am first one hehe............. .

[Artega]

chacha if you don't remove the plastic protector you could keep it blue as long as you want

Robby post up some pics when you have them in

This post has been edited by Artega: Jun 15, 2011 - 2:34 PM

[jcbass7]

1) 2bcelica
2) CHA (BLUE)
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)
16) jcbass7 (shipping cost....?)


I figure i update on the color.

[czwalga]

What's the thickness. I guess it's too late but i'd consider buying one if they could make this in .25".

[fosbal]

1) 2bcelica
2) CHA (BLUE)
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)
16) jcbass7 (shipping cost....?)


Interest is dependent on overall Total Cost delivered to my door (48439).

This post has been edited by fosbal: Jun 15, 2011 - 3:02 PM

[Capone]

If there are any left, I'd be interested.... shipping to 30269?

[vincent_doggy]

chacha if you don't remove the plastic protector you could keep it blue as long as you want

Robby post up some pics when you have them in

Yes, keep it or peel it and paint blue if you want

If there are any left, I'd be interested.... shipping to 30269?

Put your name down on the list, still have some left

What's the thickness. I guess it's too late but i'd consider buying one if they could make this in .25".

Made by 2mm thick Aluminium Panel(Mill Finished)
Never too late, but quarter inch is damn too thick and heavy~

[vincent_doggy]

Interest is dependent on overall Total Cost delivered to my door (48439).

Guys, regarding the domestic shipping from NJ to your door step, I really dunno~
I could only say the Panel alone is around 4kg
+ 2 Brackets and a 2-3 piles White Cartoon Box
Total weight is around 6kg-7kg

Don't consider too long b4 the panels are gone!

This post has been edited by vincent_doggy: Jun 15, 2011 - 8:41 PM

[Capone]

1) 2bcelica
2) CHA (BLUE)
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)
16) jcbass7 (shipping cost....?)
17) Capone (shipping cost dependent)

This post has been edited by Capone: Jun 16, 2011 - 4:44 AM

[njccmd2002]

1) 2bcelica
2) CHA (BLUE)
3) Cgtdream (price dependent)
4) ZGear (omg, shipping something this big ) Please have shipping quote ready too.
5) 96Stgreendemon (depending on price) definitely need this
6) abflug (interested if the price is good)
7) mak5603 (Depending on price)
8) Malhar95 (Depending on price)
9) (FATE)
10) DaCCelica94 count me in since it will be affordable
11) Lazurus (Need a total cost when you get it)
12) MGCustoms325
13)Culpable04
14) Tigawoods (once a price and weight of object is established)
15) Artega (group shipping for Calgarians?)
16) jcbass7 (shipping cost....?)
17) Capone
18) njccmd2002 (shipping cost) Total cost to my doorstep///

[BonzaiCelica]

is that an oil drain plug hole for all 3S-GE motors including the 3S-GTE???

[vincent_doggy]

is that an oil drain plug hole for all 3S-GE motors including the 3S-GTE???

Its the orginal design from C-One, its not big enough for you to change the oil filter