 Condensation In Headlamp, I hate condensation. |
  |
 Feb 14, 2011 - 6:41 PM
|
 
|
 Enthusiast  Joined Jan 22, '09 From Fort Worth, Texas Currently Offline Reputation: 3 (100%)  |
Topic title says it all. Nice good ol' condensation decided to come back again this year in my drivers side low beam, and now I'm fishing for ideas on how to remove/prevent it from happening.
From the reading I've done, its all going to come down to the headlamp seal or the seal where the lamp meets the housing? I'm thinking about possibly re-seating it after using a blow dryer to get rid of all the built up condensation and see if that helps. Any suggestions on "curing" this problem without having to rip off my front bumper? I lack the tools and lately the time to even do much with my baby but I'm getting very annoyed over this. Appreciate the help as always! Edit: And I just found multiple other threads on this issue. Well, if there's any other suggestions I'm still open to em lol This post has been edited by Hazmat: Feb 14, 2011 - 6:44 PM |
|
Feb 14, 2011 - 7:16 PM
|
|
 Enthusiast Joined May 10, '10 From MA Currently Offline Reputation: 37 (100%) |
i'd say your best bet is to take the bumper off and reseal the glass to the housings to stop it for a long time. i know you don't want to do that, but it's the best way
This post has been edited by mkernz22: Feb 14, 2011 - 7:16 PM |
|
Feb 14, 2011 - 8:19 PM
|
|
 Enthusiast Joined Mar 15, '07 From Tennessee Currently Offline Reputation: 52 (100%) |
some folks drop silica gel packets inside, dont know if that helps after resealing it.
-------------------- Learned a lot in 10 years... I hardly log in anymore, last login Today Sept 6 2019, and I was forced just to clarify a post. LOL
If you PM me and I dont respond, dont fret or cry. Im alive, better post your questions in the thread below, maybe I log back in 2grfe Swapped... Why I chose the 2GR, before you ask read here... A great civilization is not conquered from without until it has destroyed itself from within. @llamaraxing in Instagram is the best way to find me. I hardly log here anymore. |
|
Feb 14, 2011 - 9:33 PM
|
|
|
Enthusiast Joined Jan 22, '09 From Fort Worth, Texas Currently Offline Reputation: 3 (100%) |
I've heard the same about the silica packets, could be worth a shot. I'm leaning towards hair dryer and trying to re-seat the lamp into the housing. If that fails, I'll have to acquire the tools to rip off the bumper and mess with it when I have time.
|
|
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 3rd, 2024 - 3:44 PM |