 Spacers on stock rims?, I've searched, can't find... |
  |
 Apr 24, 2011 - 9:00 PM
|
 
|
|
Enthusiast  Joined Dec 23, '10 From PA, USA Currently Offline Reputation: 0 (0%)  |
I'm dropping my car 2" soon but keeping with the stock GT wheels. Can I put spacers on to stick them out? Anyone got any pics? Also how big of a spacer can I do? |
|
Apr 25, 2011 - 1:32 AM
|
|
 Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
Ive worked out for my stock 7.5" wide wheels with 225 tyres, the maximum is 25mm in the rear and 20mm up front. this may still require rolling of the inner lip
this combined with my stock offset of ET45. -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
|
Apr 25, 2011 - 1:38 AM
|
|
|
Enthusiast Joined Feb 11, '08 From Auckland, New Zealand Currently Offline Reputation: 0 (0%) |
With 205's you may have another 10mm to play with more than i will, if running 215's then only up to 5mm more than i do.
Whatthe talks about his spacer and hella flush issues in his thread, I think with stock 7th gens. -------------------- Mike W
1996 Toyota Celica ST205 GT-FOUR GT2860RS turbine, TiAL mvr44, JE 86.5φ piston, Clutchmasters FX400, APEX P-FC 269awhp / 273ft-lbs |
|
Apr 25, 2011 - 4:08 AM
|
|
 Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
Been running GT rims on my spacers
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
 |
|
Apr 26, 2011 - 10:17 AM
|
|
|
Enthusiast Joined Dec 23, '10 From PA, USA Currently Offline Reputation: 0 (0%) |
Any pics?
|
|
Apr 26, 2011 - 11:09 AM
|
|
 Enthusiast Joined Oct 7, '09 From Northern kentucky Currently Offline Reputation: 8 (90%) |
Im running spacers (25mm) on stock gts wheels, rear had to be rolled, running 205's though
-------------------- 1996 Toyota Celica Project Mean Green
3RD Gen 3SGTE WRC Edition W/LSD E153 - Love BOOST <3 2001 Solar yellow Lexus IS300 2001 Dodge ram 1500 Off-road edition |
|
Apr 26, 2011 - 2:30 PM
|
|
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
|
Apr 26, 2011 - 2:40 PM
|
|
|
Enthusiast Joined Dec 23, '10 From PA, USA Currently Offline Reputation: 0 (0%) |
That looks good. What size spacer is that? What else needs to be done with the spacers, longer studs? |
|
Apr 26, 2011 - 2:44 PM
|
|
|
Enthusiast Joined Feb 24, '07 From Oahu, Hawaii Currently Offline Reputation: 23 (100%) |
2 left hand studs, 3 right hand studs, a couple washers, green thread lock, and cross drilled brake lines
-------------------- I don't normally drive fast, but when I do its on a curvy section of this island
|
|
Apr 26, 2011 - 10:14 PM
|
|
|
Enthusiast Joined Dec 23, '10 From PA, USA Currently Offline Reputation: 0 (0%) |
QUOTE (808celica @ Apr 26, 2011 - 2:44 PM)  2 left hand studs, 3 right hand studs, a couple washers, green thread lock, and cross drilled brake lines Can I get those in the same aisle as the blinker fluid? |
|
Apr 27, 2011 - 10:41 AM
|
|
 Enthusiast Joined Aug 13, '08 From Australia Currently Offline Reputation: 7 (100%) |
 20mm spacers all around -------------------- |
|
Apr 28, 2011 - 6:48 PM
|
|
|
Enthusiast Joined May 30, '05 From MN Currently Offline Reputation: 8 (100%) |
Nice!! Thats what I have on mine as well for about 6months now. Had to get a different acorn nuts that are a tad longer though( 0.8inch length). The ones that came with the spacers have the tendency to get rounded easily if you are not careful with tightening and removing them. Found out the hard way.
-------------------- 3sgteing.
..burns twice as bright, lasts half as long. "The weight of the world is love. Under the burden of solitude, under the burden of dissatisfaction." -Allen Ginsberg- |
|
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 25th, 2024 - 7:23 AM |